• 한국의류산업학회지
• /
• 제16권2호
• /
• pp.333-338
• /
• 2014

This study identifies the effects of sodium sulfate and surfactants in the papain treatment of wool fabrics using L-cysteine and EDTA as activators. The research method involves the use of 2% L-cysteine and 7% EDTA as activators at optimal conditions, papain treatment of wool fabrics with the joint use of sodium sulfates and surfactants, and measurements of the weight loss rate, tensile strength, and whiteness. Results showed that for both 2% L-cysteine and 7% EDTA, the maximum papain activity appeared at 0.5% sodium sulfate concentration. In both cases, the papain activity was enhanced at sodium sulfate concentrations lower than 0.5%. In contrast, the papain activity declined at sodium sulfate concentrations higher than 0.5%. The joint use of EDTA with 0.5% sodium sulfate was proven to be very effective in improving the papain activity. The joint use of 2% L-cysteine with 0.5% sodium sulfate appeared slightly effective in improving the activity but resulted in excessive decrease in the tensile strength and whiteness, compared to improvement in the activity. The joint use of surfactants, in the case of L-cysteine, interrupted the papain activity and decreased the tensile strength regardless of the surfactant type and concentration. In the case of EDTA, however, the joint use with 0.1-5% non-ionic surfactants, 0.1-0.5% anionic surfactants, and 0.1% cationic surfactant appeared to improve the papain activity. The maximum papain activity was observed when 0.1% of surfactant was used, regardless of the surfactant type. The nonionic surfactant was the most effective in improving the papain activity.

• Journal of Pharmaceutical Investigation
• /
• 제34권3호
• /
• pp.185-192
• /
• 2004

The objective of this study was to evaluate the effects of surfactant type and concentration upon dissolution rates of carbamazepine from an immediate-release tablet. The dissolution media used in this study were aqueous solutions containing 0.1-2% sodium lauryl sulfate, cetyltrimethylammonium bromide, or polysorbate 80. The solubility of carbamazepine in the dissolution media was determined at first. A dissolution study was then conducted by using the USP dissolution apparatus II (paddle method) with an agitation rate of 75 rpm. Aliquots of the dissolution media were taken at predetermined time intervals, and the amount of carbamazepine dissolved was measured spectrophotometrically at 285 nm. The dissolution data obtained were fitted into a biphasic exponential equation with four parameters. Excellent correlations were observed between the experimental data and the theoretical ones predicted by the equation. This equation permitted the calculation of $T_{50%}$ (the time required for dissolving 50% of carbamazepine) under various experimental conditions. Differentiation of the equation also led to the attainment of dissolution rates at dissolution time points. The addition of a surfactant to an aqueous solution led to increasing the solubility of carbamazepine by 3- to 12-folds, depending upon its type and concentration. This event also resulted in enhancing the magnitude of a sink condition during the dissolution study. As a result, the dissolution rate of carbamazepine was affected by the aqueous surfactant concentration in a proportional manner. Subsequently, $T_{50%}$ values declined rapidly, as the surfactant concentration increased. Such effects were observed in decreasing order of sodium lauryl sulfate, cetyltirmethylammonium bromide, and polysorbate 80. These results clearly demonstrated that it was possible to tailor a dissolution rate and $T_{50%}$ of carbamazepine by manipulating the type and concentration of a surfactant. Relevant information would be beneficial to setting up dissolution specifications for poorly water-soluble drug products.

• 한국응용과학기술학회지
• /
• 제39권4호
• /
• pp.488-498
• /
• 2022

본 연구에서는 계면활성제 용액에서 1,3-Butanediol, 1,2-Pentanediol, 1,2 Hexanediol 들이 cmc, 표면장력, 기포력 및 유화력에 미치는 영향을 연구 하였다. 계면활성제 수용액에 diol의 첨가는 cmc와 표면장력 저하를 초래 하였으며 기포력 및 유화력은 향상 되었다. 이러한 경향은 diol의 사슬길이가 길수록 현저 하였다. 이러한 특성은 diol의 알킬사슬과 계면활성제 분자간에 소수성 상호작용이 물분자간의 응집력을 감소시키고, 계면에서 계면활성제 headgroup간 상호작용을 증진시키기 때문이다. 또한 각 diol의 방부력을 평가하기 위하여 MIC 측정을 수행 하였으며 방부력은 1,2-HDO > 1,2-PDO > 1,3-BDO 순서였다. 본 연구의 결과들은 diol들이 화장품에서 보조 계면활성제와 방부제로 이용될 수 있음을 확인 시켜 주웠다.

• Safety and Health at Work
• /
• 제8권3호
• /
• pp.296-305
• /
• 2017

Background: Surfactant-containing water sprays are commonly used in coal mines to collect dust. This study investigates the dust collection performance of different surfactant types for a range of coal dust particle sizes and charges. Methods: Bituminous coal dust aerosol was generated in a wind tunnel. The charge of the aerosol was either left unaltered, charge-neutralized with a neutralizer, or positively- or negatively-charged using a diffusion charger after the particles were neutralized. An anionic, cationic, or nonionic surfactant spray or a plain water spray was used to remove the particles from the air flow. Some particles were captured while passing through spray section, whereas remaining particles were charge-separated using an electrostatic classifier. Particle size and concentration of the charge-separated particles were measured using an aerodynamic particle sizer. Measurements were made with the spray on and off to calculate overall collection efficiencies (integrated across all charge levels) and efficiencies of particles with specific charge levels. Results: The diameter of the tested coal dust aerosol was $0.89{\mu}m{\pm}1.45$ [geometric $mean{\pm}geometric$ standard deviations (SD)]. Respirable particle mass was collected with $75.5{\pm}5.9%$ ($mean{\pm}SD$) efficiency overall. Collection efficiency was correlated with particle size. Surfactant type significantly impacted collection efficiency: charged particle collection by nonionic surfactant sprays was greater than or equal to collection by other sprays, especially for weakly-charged aerosols. Particle charge strength was significantly correlated with collection efficiency. Conclusion: Surfactant type affects charged particle spray collection efficiency. Nonionic surfactant sprays performed well in coal dust capture in many of the tested conditions.

• KSBB Journal
• /
• 제17권3호
• /
• pp.295-301
• /
• 2002

본 연구에서는 Rhodococcus sp. strain IGTS8을 이용한 미생물 탈황공정에 있어서 비이온 계면활성제인 SPAN의 영향을 조사하였다. 탈황 효율 연구에 있어서 모델 오일로는 DBT가 함유된 hexadecane, 수상으로는 배지 용액을 이용하였다. 연구에 있어서 실험 변수로는 오일/물 혼합물에 있어서 오일의 부피 %, SPAN 20의 농도, 용액의 pH로 하였으며 일반적으로 오일의 부피 비율, 계면활성제의 농도가 증가할 수록 탈황 효율이 감소되었다. 이러한 결과는 오일의 부피비가 증가할수록 계면활성제의 농도가 증가할수록 오일상의 OBT와 균주의 효율적인 접촉이 저해되기 때문으로 고려된다.

• 한국식품과학회지
• /
• 제23권1호
• /
• pp.116-121
• /
• 1991

밀전분의 호화와 노화에 수분함량과 sodium stearoyl-2-lactylate(SSL), sucrose ester(SE), monoglyceride(Dimodan) 같은 surfactant의 효과를 differential scanning calorimetry를 이용하여 조사하였다. 전분의 호화양상은 수분함량에 따라 다르고 수분함량이 30% 이하이면 호화가 일어나지 못하였다. 호화개시 온도는 $59{\sim}60^{\circ}C$이었으며, 노화개시 온도는 $50{\sim}55^{\circ}C$이었다. 노화된 전분의 엔탈피는 수분함량이 $40{\sim}50%$일 때 가장 컸다. Surfactant를 첨가하면 호화온도는 약간 높아졌고, amylose-lipid complex의 엔탈피는 증가하였다. Surfactant를 첨가한 전분은 저장에 따라 노화가 늦게 진행되었으나 amylose-lipid complex의 변화는 거의 없었다.

• Tuberculosis and Respiratory Diseases
• /
• 제45권2호
• /
• pp.369-379
• /
• 1998

연구배경: Platelet-activating factor (PAF)는 염증반응의 중요한 매개체이며, 폐혈관의 투과성을 증가시키고, 급만성 폐동맥 고혈압을 유발하며 leukotriene의 합성을 촉진시킨다. 또한 PAF는 호중구의 화화주성, 응집, 탈과립 및 유착과 leukotriene $C_4$, $D_4$ 및 superoxide anion의 생산에도 영향을 미친다. PAF는 혈소판의 응집과 thromboxane $A_2$의 생산을 초래하여 혈액 응고를 촉진시키며 폐혈관계의 미소색전을 일으켜 폐 손상 발생의 주요원인 중 하나이다. 이와같은 현상은 PAF을 흡입후에도 유사한 반응들이 일어나는 것이 관찰된다. PAF는 급성 호흡곤란 증후군(acute respiratory distress syndrome, ARDS)의 병인에 중요한 매개체 중 하나로 알려져 있다. Surfactant는 폐 방어기전에 영향을 미치는데 첫째, surfactant protein-A(SP-A)와 대식세포간 상호작용이 적절한 대식세포 기능 유지에 중요하다. 둘째, surfactant는 수많은 염증에 관여되는 매개체들을 적절이 조정하며 셋째, surf actant 단백자체가 중요한 산화방지능이었으며 넷째, 호기시 폐포밖으로 외부에서 흡입된 각종 업자(불순물들을 제거한다. 이 중 어느하나에 장애가 오면 ARDS의 병인에 중요한 영향을 미친다. 방 법: PAF를 백서 기도내 투여후 surfactant단백 A, B 및 C의 mRNA 발현 양상을 filter hybridization방법으로 조사하여 surfactant단백 A, B 및 C 유전자 발현에 대한 PAF의 효과를 관찰하여 다음과 같은 결과를 얻었다. 결 과: SP-A mRNA양은 PAF투여군에서 대조군 및 Lyso-PAF투여군에 비하여 각각 37.1% 및 41.6% 유의하게 감소하였다 (p<0.025, p<0.01). SP-B mRNA양은 PAF투여군에서 대조군 및 Lyso-PAF 투여군에 비하여 각각 18.7% 및 32.2% 감소하였으나, 유의한 차는 없었다. SP-C mRNA양은 PAF투여군에서 대조군 및 Lyso-PAF투여군에 비하여 각각 30.7% 및 38.5% 유의하게 감소하였다(p<0.01, p<0.01). 결 론: 이상의 결과로 SP-A, B, C mRNA에 대한 PAF의 억제효과를 확인 하였으며 이와같은 surfactant단백들의 발현에 대한 PAF의 억제효과가 급성 호흡곤란증후군의 병인의 한요인으로 작용할 수 있을것으로 생각된다.

• 한국응용과학기술학회지
• /
• 제27권3호
• /
• pp.240-248
• /
• 2010

The blending effects of surfactants on the polystyrene emulsion polymerization were studied. The blending of Triton X-100 and SDS affects to the interfacial properties of the styrene monomer and water phases, and finally, the properties of the polystyrene latex particles. As the blending ratio of SDS/Triton X-100 increases, the interfacial tension and CMC of the blended surfactants were decreased and results in a reducing the size of the latex particles. It was found that the interfacial tension was reduced when the surfactant were blended. By increasing the SDS content, the interfacial tension was reduced, and, at a certain condition, the interfacial tension was reached to an extremely low value to form micro-emulsion and the nano-sized latex particles (80~110 nm).

• Elastomers and Composites
• /
• 제39권4호
• /
• pp.263-273
• /
• 2004

The effects of zinc surfactant (ZB) on the bis(triethoxysilylpropyl)disulfide (TESPD)-silica mixture in natural rubber (NR) and solution butadiene-co-styrene rubber(S-SBR) were compared with respect to their rheological property, processability, physical properties, and silica dispersion. In the NR compound, addition of the ZB increased the reversion resistance time (T-2), the tensile modulus, and the BO time; however, lowered the viscosity, the HBU, and tans values. In the S-SBR copound, addition of the ZB increased the $tan{\delta}$ values while lowered the T-2, the tensile modulus the BO time, the viscosity, and the HBU of the compound. In the NR compounds, addition of the ZB significantly increased the processability and mechanical property. However, in the S-SBR compounds, it improved the processability the mechanical property was not improved.

• Bulletin of the Korean Chemical Society
• /
• 제29권5호
• /
• pp.979-984
• /
• 2008

In this study, 8 solutes (aniline, caffeine, p-cresol, ethyl benzene, methylparaben, phenol, pyridine, and toluene) have been tested in terms of linear solvation energy relationships (LSER). Several micellar liquid chromatography (MLC) systems using cationic surfactant cetyltrimethylammonium bromide (CTAB) and a mixture of water with (methanol, n-propanol, and n-butanol) modifiers were characterized using the LSER solvation parameter model. The effects of the surfactant and modifier concentration on the retention in MLC were discussed. LSER model had demonstrated high potential to predict retention factors with high squared correlation coefficients ($r^2$ > 0.99). A comparison of predicted and experimental retention factors suggests that LSER formalism is able to reproduce adequately the experimental retention factors of the solutes studied in the different experimental conditions investigated. This model is a helpful tool to understand the solute-surfactant interactions and evaluate the retention characteristic of micellar liquid chromatography.