• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2011.05a
• /
• pp.67-67
• /
• 2011

퍼멀로이의 내식성, 기계적 성질 등을 증가시키기 위해 복합도금을 실시하였다. 실리카 나노분말의 분산특성을 Zeta potential을 이용하여 측정하였으며 알칼리 도금액에서 퍼멀로이-실리카 복합도금을 실시하였다. 실리카 나노분말의 응집을 최소로 하기 위하여 전극의 RPM 변화, 첨가제와 초음파의 복합처리에 따른 변화, 전류 밀도 변화를 살펴보았다.

• Journal of Korean Society for Quality Management
• /
• v.13 no.1
• /
• pp.26-30
• /
• 1985

In the light of the properties of colloids, in the surface of disperse phase and dispersion, there exist specific characters such as adsorption or electric double layer, which seems to play important roles in determining the physiochemical properties in the dyeing system. Nylon, wool and silk, the typical amphoteric fibers were dyed with Acid dye and various combinations were prepared by combining pH, temperature and dye concentration, in order to generate flowing electric potential which were measured by microviolt meter and specific conductivity meter. The results were transformed to Zeta potential by Helmholtz-Smoluchowski formular and to surface electric charge density by Suzawa formular, surface dye amount, and effective surface area of fibers, and these data were statistically analysed by principle component analysis.

• Journal of Environmental Science International
• /
• v.27 no.3
• /
• pp.167-177
• /
• 2018

The removal characteristics of As and Se ions from aqueous solution by hexadecyl trimethyl ammonium bromide (HTMAB) modified anthracite (HTMAB-AT) were investigated under various conditions of contact time, pH and temperature. When the pH is 6, the zeta potential value of anthracite (AT) is -24 mV and on the other hand, the zeta potential value of the HTMAB-AT is +44 mV. It can be seen that the overall increase of about 60 mV. Increasing the (+) potential value indicates that the surface of the adsorbent had a stronger positive charge, so adsorption for the anion metal was increased. The isotherm data was well described by Langmuir and Temkin isotherm model. The maximum adsorption capacity was found to be 7.81 and 6.89 mg/g for As and Se ions from the Langmuir isotherm model at 298 K, respectively. The kinetic data was tested using pseudo first and pseudo second order models. The results indicated that adsorption fitted well with the pseudo second order kinetic model. The mechanism of the adsorption process showed that adsorption was dependent on intra particle diffusion model according to two step diffusion. The thermodynamic parameters(${\Delta}G^{\circ}$, ${\Delta}H^{\circ}$, and ${\Delta}S^{\circ}$) were also determined using the equilibrium constant value obtained at different temperatures. The thermodynamic parameters indicated that the adsorption process was physisorption, and also an endothermic and spontaneous process.

• Journal of the Korean Chemical Society
• /
• v.54 no.1
• /
• pp.93-98
• /
• 2010

In this work, the electrochemical properties of surface treated multi-walled carbon nanotubes (MWNTs) were studied. Nitrogen and oxygen functional groups of the MWNTs were introduced by urea and acidic treatment, respectively. The surface functional groups of the MWNTs were confirmed by X-ray photoelectron spectroscopy (XPS) measurements and zeta-potential method. The characteristics of $N_2$ adsorption isotherm at 77 K, specific surface area, and total pore volumes were investigated by BET eqaution, BJH method and t-plot method. Electrochemical properties of the functionalized MWNTs were accumulated by cyclic voltammetry at the scan rates of 50 $mVs^{-1}$ and 100 $mVs^{-1}$ in 1M $H_2SO_4$ as electrolytes. As a result, the functionalized MWNTs led to an increase of capacitance as compared with pristine MWNTs. It was found that the increase of capacitance for urea treated MWNTs was attributed to the increase in density of surface functional groups, resulting in improving the wettability between electrode materials and charge species.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.4
• /
• pp.779-789
• /
• 2013

This study aimed to investigate the emulsifying properties of bovine lactoferrin in food emulsion system. First, lactoferrin solution was prepared to study its surface activities, such as surface adsorption characteristics and ${\zeta}$-potential. Second, some physicochemical properties of lactoferrin emulsion which resulted from variations of environmental conditions (i.e., pH or NaCl addition) were determined. As for surface adsorption characteristics evaluated by surface tension, it was decreased with increasing lactoferrin concentration in solution ($1{\times}10^{-5}{\rightarrow}0.2wt%$) and showed a plateau (${\fallingdotseq}44$mN/m) above 0.01 wt%. It was also changed with pH and the minimum value of 53.8 mM/m was observed at pI of lactoferrin. This was related to changes in ${\zeta}$-potential of the lactoferrin solution with respect to pH. Fat globule size of lactoferrin emulsion was decreased with increasing lactoferrin concentration and a stable emulsion was formed above 0.5 wt% lactoferrin in emulsion with fat globule size $d_{32}$ of ca. 0.33 ${\mu}m$ as confirmed by creaming stability experiment (i.e., Turbiscan). As with surface tension, fat globule size of lactoferrin emulsion also changed with pH and showed a maximum value at pI. As evaluated by Turbiscan, in the presence of NaCl, the lactoferrin emulsion showed instability in particular above 10 mM.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.2
• /
• pp.111-117
• /
• 2008

We have studied surface roughness, contamination of impurity, bonding with some gas element, reflectance and zeta potential on masks to be generated or changed during photolithography/dry or wet etching process. Mask surface roughness was not changed after photolithography/dry etching process. But surface roughness was changed on some area under MoSi film of Cr/MoSi/Qz. There was not detected any impurity on mask surface after plasma dry etching process. Reflectance of mask was increased after variable plasma etching treatment, especially when mask was treated with plasma including $O_2$ gas. Blank mask was positively charged when the mask was treated with Cr plasma etching gas($Cl_2:250$ sccm/He:20 $sccm/O_2:29$ seem, source power:100 W/bias power:20 W, 300 sec). But this positive charge was changed to negative charge when the mask was treated with $CF_4$ gas for MoSi plasma etching, resulting better wet cleaning. There was appeared with negative charge on MoSi/Qz mask treated with Cr plasma etching process condition, and this mask was measured with more negative after SC-1 wet cleaning process, resulting better wet cleaning. This mask was charged with positive after treatment with $O_2$ plasma again, resulting bad wet cleaning condition.

• Membrane Journal
• /
• v.12 no.1
• /
• pp.41-50
• /
• 2002

The streaming potential generated by the electrokinetic flow within electric double layer of charged microchannel is applied to determine the zeta potential of hollow-fiber membrane pore by using the general Helmholtz-Smoluchowski equation. The streaming potential is know to provide a useful real-time information on the surface property and the interaction between pore and particles in actual situations and physicochemical conditions. The influence of physicochemical parameters upon the filtration with hollow-fibers has been examined with an in-situ and simultaneously monitoring the streaming potential as well as permeate flux. In particular, the present study examined an experimental method to identify the effect of cake layer which can vary according to the axial position of a hollow-fiber and the progress of membrane fouling by measuring the position-dependent streaming potential. As the latex concentration increases, the permeate flux decreased but the streaming potential increased. The growth of cake layer has been mire developed with increasing latex concentration, however, the effect of surface charges of latexes deposited on the membrane surface leads to increase the streaming potential. With increasing ionic concentration of KCI, both the permeate flux and the streaming potential decrease. The increase of ionic concentration provides a compact cake layer due to the shrinkage of Debye length and the decreased streaming potential results from the weakened ionic flows owing to a thin diffusive double layer.

• Journal of Adhesion and Interface
• /
• v.13 no.3
• /
• pp.109-115
• /
• 2012

Monodisperse blue-colored poly(styrene-co-acrylic acid) latices were successfully prepared by seeded emulsion polymerization. Blue-colored latices with carboxyl anionic charge on the surface were synthesized at the second stage with the introduction of Blue 606 dye, acrylic acid, and 0.21 ${\mu}m$-polystyrene seed. All the blue-colored latices synthesized in this study were in the size range of 0.25~0.42 ${\mu}m$ and all uniform with less than 1.01 in PSD. The particle size increased with the addition of acrylic acid being delayed and colloidally stable latices were obtained over 30 min after its addition. The blue-colored latex with 20 wt% acrylic acid showed -145 mV of zeta-potential and $-9.4{\times}10^{-6}\;cm^2/Vs$ of electrophoretic mobility, and with 25 wt% of DVB showed high $T_g$ at 396.7 K.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.5
• /
• pp.21-31
• /
• 2012

In this study, we modified the surface of ground calcium carbonate (GCC) with polyelectrolytes with different molecular weight using Layer-by-Layer (LbL) multilayering technique and investigated its effect on the paper properties. Polydiallydimethylammonium chloride (poly-DADMAC) and poly sodium 4-styrene sulfonate (PSS) which have different molecular weights were used for LbL multilayering. Zeta potential and particle size of the LbL modified GCC were measured. After preparation of handsheets, their structural and mechanical properties were evaluated. The zeta potential and average particle size of the modified GCC were affected by the molecular weight of anionic polyelectrolyte (PSS). The zeta potential was higher and the particle size was smaller when GCC was treated by PSS with high molecular weight compared to the case with low molecular weight of PSS. The tensile and internal bond strength of the handsheets was increased with an increase in the number of layers on GCC particles, but the molecular weight of polyelectrolyte did not significantly affect the paper strength.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.12
• /
• pp.2135-2139
• /
• 2000

The coagulation of anionic colloidal particles by the cyanoguanidine(CG)-formaldehyde resin has been reported to be caused by an electrostatic interaction of the diaminomethylene urea (DU) cation with an anionic surface charge of particles. In this research, 100~500 nm sized cationic cyanoguanidine-formaldehyde resin was synthesized to coagulate anionic dye wastewater, and the results showed that the less pH of aqueous cyanoguanidine-formaldehyde resin solution was, the higher Zeta potential of that was. In case of coagulating 0.4 g/L reactive dye by cyanoguanidine-formaldehyde resin at pH 3, 5, 7, 9, and 11, COD removal and the percent decolorization of synthetic dye wastewater at pH 3 are higher than those of other pH conditions. The COD removal and the percent decolorization of synthetic dye wastewater were 74% and 90% at 400 ppm, pH 3.