• Journal of the Korean Society of Clothing and Textiles
• /
• v.19 no.1
• /
• pp.51-56
• /
• 1995

Cotton fabric was treated with acrylonitrile in t-butyl alcohol and then aminized by reduction of the resultant cyanoethyl cellulose with LiAIH4, under various temperatures and times. Aminized cotton fabric toras dyed with acid and reactive dye. Dyeability as to temperatures, pH, and color fastness were compared to the amiRe group content of treated cotton fabrics. The results of this study were as follow: 1. D.S of cyanoethyl cellulose has been increased by increasing treating temperatures and times. Maximum D.S of cyanoethyl cellulose was 1.45. By SEM and the tensile strength, the damage of the treated cotton was not observed. 2. Since aminized cotton has greater affinity on acid dye than untreated cotton, dyeability increased with the increase of amino group content, and the lower pH, $60^{\circ}C$. 3. Since amino group in aminized cotton changes surface charge of cotton, dyeability for reactive dye increased by increasing the amino group content. Optimum dyeability was obtained at pH 5-7, $40^{\circ}C$. And dyeability of the amine treated cotton increased with the NaCl conc. 4. Color fastness to washing & light of the amine treated cotton was very low except for the wash fastness of the reactive dye.

• Journal of Biosystems Engineering
• /
• v.28 no.2
• /
• pp.167-172
• /
• 2003

This study was performed to fabricate a batch-type SPR biosensing system using a thiolated E. coli antibody coupling, and to explore the feasibility of real-time detection of E. coii in a stagnant sample solution. In advance. “O” and “K” antigenic serotype E. coli antibodies were thiolated with sulfo-LC-SPDP and dithiothreitol, and immobilized by chemisorption in the gold surface of compact SPR sensors. When the SPR biosensor immobilized with E. coli antibody monitored a E. coli solution, it took 3 to 5 min to stabilize. The SPR biosensing system developed in this study was able to detect E. coli in the range above 10$^4$ CFU/mL at the 0.05 significant level. Also, the SPR biosensor had possibility to significantly detect E. coli in the range of 10$^2$ to 10$^4$ CFU/mL in E. coli solutions. Meanwhile, when the SPR biosensor immobilized with 5. coli antibody was cleaned with NaOH solutions, its ability to detect E. coli largely decreased due to wash-out of the immobilized antibody. In order to reuse the SPR sensor, it should be antibody-immobilized newly.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.25 no.4 s.34
• /
• pp.51-55
• /
• 1999

Cosmetic mask is one of the traditional cosmetic product and is used to keep skin healthy and beautiful through moisturizing effect, cleansing effect and acceleration effect on microcirculation. There are several types of cosmetic mask such as peel-off type, tissue-off type, wash-off type and cotton sheet type immersed in cosmetic water. It is important for cosmetic formulators to develop an adequate type of cosmetic mask that meets the needs of the target consumers because each type of cosmetic mask has benefits and problems in its usage and efficacy. Polyvinyl alcohol (PVA) is widely used as an active ingredient of peel-off type cosmetic mask and the physical property of the PVA film changes with the usage of other ingredients. We studied the change of physical properties of the film containing PVA by formulating peel-off type cosmetic mask with the variation of humectants. Methylguceth-20 and glycereth-26 reduce the interaction between skin surface and PVA film without serious weakening of tensile strength and they can alleviate irritation. Glycerin, urea and betaine help PVA film soften and they also have excellent efficacy as humectants.

• Agricultural and Biosystems Engineering
• /
• v.5 no.2
• /
• pp.60-63
• /
• 2004

Demand for development of processing systems for pre-washed rice and propagation of the systems has recently been on the rise, because rice-cooking requires watering 15 times the rice quantity to cook, as in case of the regular rice currently being circulated in Korean market, in addition to paying the trouble of washing it for cooking, and besides the milky turbid water coming from the rice-washing contributes to water contamination. In this study, therefore, a processing system for pre-washed rice was designed and built with rice surface polishing devices that adopted abrading and airing methods, an electrostatic method and a method using a fine watering, to conduct its performance test. The result showed that turbidity of the wash water, which is the base to determine the pre-washed rice standard, turned out 47.33 ppm and 48.00 ppm respectively for 800 kg/hr and 1,000 kg/hr supplies, which meets the standard for the processing system free from rice-washing for cooking. The quantity of watering at this experiment was only 0.43 times the rice, thus resulting in curtailment of process-watering by approximately $69\%$ compared with the existing wet-type pre-washed rice processing system popular in Korean market.

• Journal of Environmental Impact Assessment
• /
• v.10 no.3
• /
• pp.223-234
• /
• 2001

In this study, we conducted a survey to examine the runoff characteristics of nonpoint sources, which wash off pollutants from the surface of basin during rainfall and affect water pollution of streams. An Anyangchun basin in the region Ewiwang City was selected as a study site. The basin divided into several subbasins such as Wanggokchun, Ojeonchun, and Anyangchun based on the tributaries, which confluence to the main stream of Anyangchun. Four times of field examination had been carried out between July and August of 2000, and water quality data collected from the surveys had been analysed. The survey includes in-situ flow, DO and PH measurements in the outlet of catchment. Laboratory analysis includes BOD, TN, TP. From the result, pollutant by runoff of nonpoint sources were washed out along with stormwater in the beginning of rainfall, and flowed into streams resulted in stream pollution. In case of BOD, the load from Ojeonchun catchment, most of which included urban areas, took up 50% of the total load from the entire watershed. Thus, by the results, it is clear that runoff load by urban nonpoint sources plays an important role in the control and management of nonpoint sources for the watershed.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.2
• /
• pp.319-327
• /
• 2008

The purpose of this study is to propose the development of high quality electromagnetic wave shielding fabrics. Silver nitrate is used for polyester fabric as an electromagnetic wave shielding material. The effects of activators and electroless silver plating condition on the evenness and adhesion of silver to fabrics, are observed through the SEM micrographs. Surface morphology and wash-ability are measured using SEM. The results are as follows: The optimum weight loss by alkaline hydrolysis of polyester fabrics is about 20%. The optimum concentration of $SnCl_2$ and $PdCl_2$in catalyst reaction using $PdCl_2$ as an activator is 2.5g/L and 0.5g/L, respectively. The optimum concentration of dextrose to improve adhesion between the silver plating and fabrics is 45g/L. The optimum concentration of silver nitrate in the catalyst reaction, using $PdCl_2$ as an activator is 56g/L, respectively. The optimum plating temperature and time are $15^{\circ}C$ and 30minutes, respectively.

• Textile Coloration and Finishing
• /
• v.32 no.3
• /
• pp.158-166
• /
• 2020

Self-cleaning fabric is a fabric having a function of decotamination via photodecomposition of photocatalyst or wash-off of contaminants on the superhydrophobic surface. TiO₂ is the main photocatalyst for this purpose, but it only functions under UV light which is only a little portion of sunlight, compared to visible light. In this regard, this study aims to investigate Fe-doped TiO₂ for improved photodecomposition from visible light sensitization to apply self-cleaning finishing of PET fabrics. Moreover, the Fe-doped TiO₂ treated PET fabric was further treated with hexadecyltrimethoxysilane to provide superhydrophobicity on the PET fabrics. As a result of this dual treatment, the prepared fabric exhibited excellent photodecomposition of methylene blue with 96.96% in 12h under sunlight and superhydrophobicity with water contact angle of 166.5° and roll-off angle of 7°. This suggested that the excellent self-cleaning functions can be privided to PET fabric via Fe-doped TiO₂ and hexadecyltrimethoxysilane treatment.

• Proceedings of the SCSK Conference
• /
• 1999.10a
• /
• pp.51-55
• /
• 1999

Cosmetic mask is one of the traditional cosmetic product and is used to keep skin healthy and beautiful through moisturizing effect, cleansing effect and acceleration effect on microcirculation. There are several types of cosmetic mask such as peel-off type, tissue-off type, wash-off type and cotton sheet type immersed in cosmetic water. It is important for cosmetic formulators to develop an adequate type of cosmetic mask that meets the needs of the target consumers because each type of cosmetic mask has benefits and problems in its usage and efficacy. Polyvinyl alcohol (PVA) is widely used as an active ingredient of peel-off type cosmetic mask and the physical property of the PVA film changes with the usage of other ingredients. We studied the change of physical properties of the film containing PVA by formulating peel-off type cosmetic mask with the variation of humectants. Methylguceth-20 and glycereth-26 reduce the interaction between skin surface and PVA film without serious weakening of tensile strength and they can alleviate irritation. Glycerin, urea and betaine help PVA film soften and they also have excellent efficacy as humectants.

• The Journal of Korean Academy of Prosthodontics
• /
• v.28 no.2
• /
• pp.29-51
• /
• 1990

This study was designed to compre the tensile bond strength of 4-META containging denture base resin to Co-Cr alloys after various surface treatments. Especially the surface treatment of sandblasting the mental with aluminum oxide and treating in oxidizing solution composed of 3% aqueous sulfuric acid with 1% potassium manganate were compared. Effect of surface roughness on bonding was measured after sandblasting with 50um, 300um aluminun oxide and polishing with emery pater. Also the effects of wax and wax solvent on bonding were observed. According to the type of polymerization process, heat-cured Meta-Dent resin and autopolymerizing Meta-Fast resin were used. For some specimnens, the tensile bond strength were measured agter three pre-conditions : 1day after bonding, immersed in water at $75^{\circ}C{\pm}3^{\circ}C$ for 4weeks, under normal ambient condition for 4weeks. The following results were obtained from this study : 1. The bond strengths of resins containing 4-META were significantly higher than those of conventional denture base resins(p<0.05). 2. Autopolymerizing Meta-Fast resin had higher bond strength than heat-cured Meta-Dent, resin(p<0.05). 3. The bond strengths of Biosil and Nobilium to 4-META containging resins were not significally different(p>0.05). 4. Stable adhesion can be achieved when mechanically roughen the metal surface by snadblasting with $50{\mu}m$ aluminum oxide than treating in an oxidizing soluing with potassium manganate(p<0.05). 5. Once the metal surface is contaminated with wax, the bond srtength decreased greatly in spite of wax wash with boiling water. But the bond strength recovered significantly with the use of wax solvent 6. Meta-Dent resin had higher bond strength when roughen the metal surface with $50{\mu}m$ aluminum oxide than with $300{\mu}m$ aluminum oxide(p<0.05). In case of Meta-Fast, resin, the use of $300{\mu}m$aluminum oxide was a little advantageous of bonding, but was statistically insignificant(p>0.05).

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.4
• /
• pp.423-430
• /
• 2019

In this study, the flexural strength, absorption rate, methylene blue photo catalyst decomposition performance and anti-fouling performance were evaluated according to the photo catalyst mixing rate and block surface wash status by applying photo catalyst to the surface layer of concrete sidewalk block. The results showed that the flexural strength of the block that mixed photo catalyst only in the surface layer of the concrete block was 5.32MPa of the general block (SNW) of 5% photo catalyst, compared to 5.46MPa of the non-mixed concrete block of the reference concrete block. Surface washing block (SW) 5.26MPa, 10% photo catalyst general block (SNW) 5.26MPa, and 5.15MPa surface washing block (SW). It has been shown that the presence of surface washing and the mixing rate of photo catalyst in the concrete block have no effect on the flexural strength. Moreover, the photoreaction performance of concrete sidewalk blocks showed that the methylene blue removal rate of specimens with 5% TiO₂ was 34.2%, the methylene blue removal rate of specimens with 10% TiO₂ was 37.1%, and the removal rate of the methylene blue of specimens with 5% TiO₂ was about 37.9% and 10% mixed specimens with TiO₂ was about 37.6%.