• Structural Engineering and Mechanics
• /
• v.53 no.5
• /
• pp.867-880
• /
• 2015

Mechanical fastening is still one of the main methods used for joining components. Different techniques have been applied to reduce the effect of stress concentration of notches like fastener holes. In this work we evaluate the feasibility of combining laser shock peening (LSP) and cold expansion to improve fatigue crack initiation and propagation of open hole specimens made of 6061-T6 aluminum alloy. LSP is a new and competitive technique for strengthening metals, and like cold expansion, induces a compressive residual stress field that improves fatigue, wear and corrosion resistance. For LSP treatment, a Q-switched Nd:YAG laser with infrared radiation was used. Residual stress distribution as a function of depth was determined by the contour method. Compact tension specimens with a hole at the notch tip were subjected to LSP process and cold expansion and then tested under cyclic loading with R=0.1 generating fatigue cracks on the hole surface. Fatigue crack initiation and growth is analyzed and associated with the residual stress distribution generated by both treatments. It is observed that both methods are complementary; cold expansion increases fatigue crack initiation life, while LSP reduces fatigue crack growth rate.

• Journal of Veterinary Clinics
• /
• v.16 no.2
• /
• pp.409-412
• /
• 1999

To establish the electroacupuncture anesthesia for pigs, 6 piglets (Landrace mixed, 1 month old, 3.7~5.3 kg, female: 3 heads and male: 3 heads) were examined. The acupoints used for porcine electroacupuncture anesthesia were An-shen, and Tian-ping and Bai-hui. After horizontal insertion of needle to left and right An-shen, and perpendicular insertion to Tian-ping and Bai-hui, respectively, positive electrode was connected at right An-shen and Tian-ping, and negative electrode was connected at left An-shen and Bai-hui using veterinary electroacupuncture anesthesia apparatus, respectively. Electric condition was 3 V and 30 Hz. To examine the effect of electroacupuncture anesthesia, laparotomy (4 heads) and castration (2 heads)were applied. The induction time of electroacupuncture anesthesia was very rapid and about 1 minute, and pain of the body surface including the extremities was not detected. As for the reactions with electroacupuncture anesthesia, the head was directed to backward, nasal part was curved to one side, and blepharum was closed in part of changed nasal part. In addition, consciousness was vivid, and muscle tension and lift of the tail were observed in early stage but was relaxated afterwards. The pain was not found during incision and suture, bleeding was comparatively small volume and the class of anesthesia effect was excellent.

• Weed & Turfgrass Science
• /
• v.6 no.4
• /
• pp.313-321
• /
• 2017

Wetting agent is designed to reduce the surface tension of the liquid and spread more easily across or penetrate into the soil against water repellency. The effect of wetting agent to seed germination is not clear. Using germination enhancer is one of the methods to increase the germination speed of turfgrass seeds and to shorten establishment period. The objective of the study was to evaluate germination enhancer and wetting agent for quick establishment of various Kentucky bluegrass cultivars. The germination enhancer was used at two levels of 0.3 and $0.6ml\;kg^{-1}$ as low and high, respectively. Two levels of wetting agent were of 0.46, and $0.92ml\;m^{-2}$ as low and high, respectively. Germination enhancer has no synergistic effect with wetting agent. When quick establishment is required, selection of cultivar would be more effective instead of using germination enhancer and wetting agent. Among Kentucky bluegrass cultivars, 'Award' had the greatest turfgrass coverage for establishment and the greatest turfgrass color and quality based on the result of the study. When quick establishment is required, selection of cultivar would be more effective instead of using germination enhancer and wetting agent.

• Journal of ILASS-Korea
• /
• v.6 no.3
• /
• pp.38-44
• /
• 2001

The effect of four diesel fuels with oxygenated agents fuels on spray properties from plain-orifice atomizer was investigated. The oxygenates evaluated were diglyme, MTBE, DEE and DMM and were blended in weights of 5, 10, 15, 20 and 30% in a baseline diesel fuel. The physical properties such as surface tension, density and viscosity are also measured for each blended oxygenated fuels. It was found that changes in physical properties of fuels considered are enough to influence spray properties, i.e. spray angle, spray tip penetration and mean drop size. Spray properties were measured by PMAS(particle motion analysis system) which is employing a point measurement technology. Spray angle increased with increase in oxygenate content. The effect, however, was not great in the higher blend level. The oxygenated fuels produced more shorter spray tip penetration than diesel fuels. SMD was decreased with the increase in blending percent. SMD for DMM and DEE are represented 10.33 and 3.41% decreasing rates respectively. It was found that changes in spray characteristics of oxygenated fuel were easily large enough to impact pollutant emissions. It was clear from this study that spray characteristics of oxygenated fuel is one of possible cause of reducing pollutant emissions. It was clear from this study that spray characteristics of oxygenated fuel is one of possible cause of reducing pollutant emissions from diesel engines when oxygenated fuels is applied.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.30 no.11 s.254
• /
• pp.1107-1116
• /
• 2006

The droplet ejection process driven by an evaporating bubble in a thermal inkjet printhead is investigated by numerically solving the conservation equations for mass, momentum and energy. The phase interfaces are tracked by a level set method which is modified to include the effect of phase change at the interface and extended for multiphase flows with irregular solid boundaries. The compressibility effect of a bubble is also included in the analysis to appropriately describe the bubble expansion behaviour associated with the high pressure caused by bubble nucleation. The whole process of bubble growth and collapse as well as droplet ejection during thermal inkjet printing is simulated without employing a simplified semi-empirical bubble growth model. Based on the numerical results, the jet breaking and droplet formation behaviour is observed to depend strongly on the bubble growth and collapse pattern. Also, the effects of liquid viscosity, surface tension and nozzle geometry are quantified from the calculated bubble growth rate and ink droplet ejection distance.

• Journal of the Korean Ceramic Society
• /
• v.30 no.1
• /
• pp.7-16
• /
• 1993

Effect of sulfate on the reactionof C3S formation in presence of clinker melt and its appearance in clinker were investigated, using (NH4)2SO4 and CaSO4 as sulfate sources. When (NH4)2SO4 and CaSO4 were added, both showed the similar results, 1.0wt% of sulfate could promoted the reaction of C3S formation, however for its content of more than 2.0wt%, the formation of C3S was prevented. Residual limit of sulfate to C3S formation is about 1.4wt%. Appearances of sulfate were C4A3l and CaSO4 in interstitial phase. For the addition of (NH4)2SO4 or CaSO4 of 20wt%~4.0wt%, C3S grains showed the hypertrophic growth. We might consider that, because sulfate reduced the surface tension and viscosity of the clinker melt, C3S crystals were precipitated below 140$0^{\circ}C$, and the crystlas of C3S were coalesced and linked in the same crystallographical direction with increasing temperature becuase of their rapid growth rate.

• Advances in aircraft and spacecraft science
• /
• v.1 no.4
• /
• pp.409-425
• /
• 2014

Converging flows of a gas and a liquid at a microchannel cross junction, under proper conditions, can result in the formation of periodic, dispersed microslugs. This microslug formation phenomenon has been proposed as the basis for a fuel injection system in a novel, 'discrete' monopropellant microthruster designed for use in next-generation miniaturized satellites. Previous experimental studies demonstrated the ability to generate fuel slugs with characteristics commensurate with the intended application during steady-state operation. In this work, numerical and experimental techniques are used to study the effect of valve actuation on slug characteristics, and the results are used to compare with equivalent steady-state slugs. Computational simulations of a valve with a 1 ms valve-actuation cycle show that as the ratio of the response time of the valve to the fully open time is increased, transient effects can increase slug length by up to 17%. The simulations also demonstrate that the effect of the valve is largely independent of surface tension coefficient, which is the thermophysical parameter most responsible for slug formation characteristics. Flow visualization experiments performed using a miniature valve with a 20 ms response time showed less than a 1% change in the length of slugs formed during the actuation cycle. The results of this study indicate that impulse bit and thrust calculations can discount transient effects for slower valves, but as valve technology improves transient effects may become more significant.

• Korean Journal of Applied Biomechanics
• /
• v.23 no.3
• /
• pp.279-284
• /
• 2013

The purpose of this study was to determine the effect of head posture and respiratory pattern on muscle activities of sternocleidomastoid (SCM) and scalene during maximal respiration. The seventeen subjects with upper-costal breathing pattern were participated in this study. Surface electromyography was used to measure the muscles activities of SCM and scalene. The volume and velocity of inspiration were monitored by using the spirometer in each subject. Each subject was performed the 3-cycle of respiration in each condition. The mean values of three peak muscle activity in each muscle were used in the data analysis. A2 (head posture: forward head posture: FHP vs. neutral posture) X 2 (breathing pattern: costal vs. diaphragmatic) repeated-measures analysis of variance (ANOVA) was used to compare the normalized muscle activities of the SCM and scalene. The results showed that the muscle activities of SCM and scalene in diaphragmatic breathing were significantly lower than those in costal breathing for each head posture (p<.0125). The muscle activities of SCM in neutral position were lower than those in forward head position during costal breathing (p<.0125). The diaphragmatic breathing in neutral position of head is recommended to decrease the tension of the accessory inspiratory muscles during respiration in neck-pain patients with FHP.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2012.05a
• /
• pp.416-423
• /
• 2012

Liquid acquisition device in the liquid propellant supply system is required to protect entrance of gas bubble into the propulsion system. The device exploits the capillary effect of micro-sized poles in a screen and supplies pure liquid-phase propellant to the propulsion system. The bubble point is the most important performance parameter in the design of a liquid acquisition device. In this paper, performance parameters affecting the bubble point are identified through literature survey, in order to develop the experimental setup for the bubble point measurement.

• Applied Chemistry for Engineering
• /
• v.23 no.1
• /
• pp.112-118
• /
• 2012

In this study, physical properties of synthesized DE7-OSA82-AO and DEP52-OSA82-AOQ82 zwitterionic surfactants were measured such as critical micelle concentration, surface tension, interfacial tension, contact angle and viscosity. Phase behavior study was also performed. The dual function characteristics of a zwitterionic surfactant were investigated by determining an isoelectric point, which was attained using zeta potential measurements and QCM (quartz crystal microbalance) experiments. The isoelectric point of DE7-OSA82-AO surfactant determined by the zeta potential measurement and QCM experiment was about 7.2 and 7.4, respectively. On the other hand, the isoelectric point of DEP52-OSA82-AOQ82 surfactant determined by the zeta potential measurement and QCM experiment was about 10.9 and 11.0, respectively. The frictional property measured using an automated mildness tester showed that DE7-OSA82-AO surfactant can provide a good softening effect at an acidic or neutral condition. On the other hand, DEP52-OSA82-AOQ82 was found to provide a good softening effect to a fabric surface at a pH below its isoelectric point of 11.