• 제목/요약/키워드: Surface state density

검색결과 311건 처리시간 0.023초

황처리가 금속/InP Schootky 접촉과 $Si_3$$N_4$/InP 계면들에 미치는 영향 (Effects of sulfur treatments on metal/InP schottky contact and $Si_3$$N_4$/InP interfaces)

  • 허준;임한조;김충환;한일기;이정일;강광남
    • 전자공학회논문지A
    • /
    • 제31A권12호
    • /
    • pp.56-63
    • /
    • 1994
  • The effects of sulfur treatments on the barrier heithts of Schottky contacts and the interface-state density of metal-insulator-semiconductor (MIS) capacitors on InP have been investigated. Schottky contacts were formed by the evaporation of Al, Au, and Pt on n-InP substrate before and after (NH$_{4}$)$_{2}$S$_{x}$ treatments, respectively. The barrier height of InP Schottky contacts was measured by their current-voltage (I-V) and capacitance-voltage (C_V) characteristics. We observed that the barrier heights of Schottky contacks on bare InP were 0.35~0.45 eV nearly independent of the metal work function, which is known to be due to the surface Fermi level pinning. In the case of sulfur-treated Au/InP ar Pt/InP Schottky diodes, However, the barrier heights were not only increased above 0.7 eV but also highly dependent on the metal work function. We have also investigated effects of (NH$_{4}$)$_{2}$S$_{x}$ treatments on the distribution of interface states in Si$_{3}$N$_{4}$InP MIS diodes where Si$_{3}$N$_{4}$ was provided by plasma enhanced chemical vapor deposition (PECVD). The typical value of interface-state density extracted feom 1 MHz C-V curve of sulfur-treated SiN$_{x}$/InP MIS diodes was found to be the order of 5${\times}10^{10}cm^{2}eV^{1}$. This value is much lower than that of MiS diodes made on bare InP surface. It is certain, therefore, that the (NH$_{4}$)$_{2}$S$_{x}$ treatment is a very powerful tool to enhance the barrier heights of Au/n-InP and Pt/n-InP Schottky contacts and to reduce the density of interface states in SiN$_{x}$/InP MIS diode.

  • PDF

In Situ Spectroscopy in Condensed Matter Physics

  • Noh, Tae Won
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
    • /
    • pp.92-92
    • /
    • 2014
  • Recently, many state-of-art spectroscopy techniques are used to unravel the mysteries of condensed matters. And numerous heterostructures have provided a new avenue to search for new emergent phenomena. Especially, near the interface, various forms of symmetry-breaking can appear, which induces many novel phenomena. Although these intriguing phenomena can be emerged at the interface, by using conventional measurement techniques, the experimental investigations have been limited due to the buried nature of interface. One of the ways to overcome this limitation is in situ investigation of the layer-by-layer evolution of the electronic structure with increasing of the thickness. Namely, with very thin layer, we can measure the electronic structure strongly affected by the interface effect, but with thick layer, the bulk property becomes strong. Angle-resolved photoemission spectroscopy (ARPES) is powerful tool to directly obtain electronic structure, and it is very surface sensitive. Thus, the layer-by-layer evolution of the electronic structure in oxide heterostructure can be investigated by using in situ ARPES. LaNiO3 (LNO) heterostructures have recently attracted much attention due to theoretical predictions for many intriguing quantum phenomena. The theories suggest that, by tuning external parameters such as misfit strain and dimensionality in LNO heterostructure, the latent orders, which is absent in bulk, including charge disproportionation, spin-density-wave order and Mott insulator, could be emerged in LNO heterostructure. Here, we performed in situ ARPES studies on LNO films with varying the misfit strain and thickness. (1) By using LaAlO3 (-1.3%), NdGaO3 (+0.3%), and SrTiO3 (+1.7%) substrates, we could obtain LNO films under compressive strain, nearly strain-free, and tensile strain, respectively. As strain state changes from compressive to tensile, the Ni eg bands are rearranged and cross the Fermi level, which induces a change of Fermi surface (FS) topology. Additionally, two different FS superstructures are observed depending on strain states, which are attributed to signatures of latent charge and spin orderings in LNO films. (2) We also deposited LNO ultrathin films under tensile strain with thickness between 1 and 10 unit-cells. We found that the Fermi surface nesting effect becomes strong in two-dimensions and significantly enhances spin-density-wave order. The further details are discussed more in presentation. This work was collaborated with Hyang Keun Yoo, Seung Ill Hyun, Eli Rotenberg, Ji Hoon Shim, Young Jun Chang and Hyeong-Do Kim.

  • PDF

다중면 하중하에 정방향 대층구조를 가진 격자재료의 연속적인 소성모델 (Continuum Based Plasticity Models for Cubic Symmetry Lattice Materials Under Multi-Surface Loading)

  • 선우현;허종완
    • 복합신소재구조학회 논문집
    • /
    • 제2권3호
    • /
    • pp.1-11
    • /
    • 2011
  • 본 연구에서는 하위 요소로(sub-element) 구성된 3차원 대칭 단위 요소들로 조합된 트러스 격자 구조물의 연속적인 물성치를 제안하였다. 개별적인 트러스 격자 물성치는 균질화 작업을 통하여 유효한 응력과 변형률 관계로 이루어진 연속적인 물성치 모델로 나타낼 수 있다. 미시적인 규모(micro scale) 스트럿의 인장이나 압축 응답에 의한 축강성은 전체 격자재료의 대부분의 강도를 차지하고, 이러한 스트럿의 부피 분율(fraction)은 효과적인 강도뿐만 아니라 복제 가능한 단위 요소로 이루어진 격자판의 상대밀도에 큰 영향을 주었다. 그러므로 균질한 강성부재로 구성된 연속적인 구성모델은 미시적인 규모로 간주되는 스트럿의 강도, 내부응력 상태 및 부피 분율과 관련된 역학적인 특성들을 포함하고 있다는 것을 확인할 수 있었다. 미시적인 규모의 응력에서 소성흐름은 균질한 구성식에서 파생된 거시적인 규모에서의 (macro-scale)응력 표면에 있는 연속적인 응력함수의 영역을 확장한다. 따라서 본 연구를 통하여 3차원 대칭 단위요소 구조물의 기본 기하학을 조사하고 압력에 의존적인 마크로 규모에서의 (macro-scale) 응력함수를 예측하는 연속적인 소성모델을 공식화하였다.

Optimal design of slider for stable flying characteristic using 4${\times}$l near-field probe array

  • Jung Min-su;Hong Eo-Jin;Park Kyoung-Su;Park No-Cheol;Yang Hyun-Seok;Park Young-Pil;Lee Sung-Q;Park Kang-Ho
    • 정보저장시스템학회:학술대회논문집
    • /
    • 정보저장시스템학회 2005년도 추계학술대회 논문집
    • /
    • pp.171-176
    • /
    • 2005
  • In the information storage development, the trend of the storage device is to increase the recording density. Among such an effort, near-field probe recording is spotlighted as a method of high increasing recording density. For the successfully embodiment of storage device, the actuating mechanism of near-field probe is essentially designed. In this paper, we suggest the slider similar with conventional HDDs and design the slider using near- field probe for the purpose of applying the slider in order to control gap between probe and media. The most important object of slider design is to guarantee the flying ability and stability. For achievement of these design objects, we perform two step of optimal design process. The media is mod! eled as random displacement, which is only considered roughness of disk surface. The design slider is analyzed with dynamic state in assumed media. At this process, the optimal model is confirmed to stable flying stability.

  • PDF

직접수치모사를 이용한 수직원형관내 초임계압 유체의 난류 열전달 특성 연구 (Direct Numerical Simulation of Turbulent Heat Transfer to Fluids at Supercritical Pressure Flowing in Vertical Tubes)

  • 배중헌;유정열;최해천
    • 대한기계학회논문집B
    • /
    • 제28권11호
    • /
    • pp.1302-1314
    • /
    • 2004
  • Turbulent heat transfer to $CO_2$ at supercritical pressure flowing in vertical tubes is investigated using direct numerical simulation (DNS). A conservative space-time discretization scheme for variable-density flows at low Mach numbers is adopted in the present study to treat steep variations of fluid properties at supercritical pressure just above the thermodynamic critical point. The fluid properties at these conditions are obtained using PROPATH and used in the form of tables in the simulations. The buoyancy influence induced by strong variation of density across the pseudo-critical temperature proved to play a major role in turbulent heat transfer at supercritical state. Depending on the degree of buoyancy influence, turbulent heat transfer may be enhanced or significantly deteriorated, resulting in local hot spots along the heated surface. Based on the results of the present DNS combined with theoretical considerations, the physical mechanism of this local heat transfer deterioration is elucidated.

DV-Xα 클러스터 계산법에 의한 Fe4N의 전자상태계산 (Electronic States Calculation of Fe4N by DV-Xα cluster calculation)

  • 송동원;이인섭;배동수
    • 한국재료학회지
    • /
    • 제12권1호
    • /
    • pp.44-47
    • /
    • 2002
  • DV(Discrete Variation)-X${\alpha}$ cluster calculation was employed to calculate the electronic states of ${\gamma}'- Fe_4N$ which was one of iron nitride phases synthesized from plasma ion nitriding to improve surface hardness and wear resistance. The result of calculated electron density of states for Fe was similar to the result of band calculation. The cluster used for calculation of electronic states of ${\gamma}'-Fe_4N$ was based on $Fe_{14}N$ cluster which comprises 15 atoms. Finally the electronic states of ${\gamma}'- Fe_4N$ such as net-charge, band order, energy level, electron wave-function, and contour map for electron density were derived by the calculation.

Optimal Design of Slider for Stable Flying Characteristics using $4{\times}1$ Near-field Probe Array

  • Jung, Min-Su;Hong, Eo-Jin;Park, Kyoung-Su;Park, No-Cheol;Yang, Hyun-Seok;Park, Young-Pil;Lee, Sung-Q;Park, Kang-Ho
    • 정보저장시스템학회논문집
    • /
    • 제2권1호
    • /
    • pp.65-70
    • /
    • 2006
  • In the information storage development, the trend of the storage device is to increase the recording density. Among such an effort, near-field probe recording is spotlighted as a method of high increasing recording density. For the successfully embodiment of storage device, the actuating mechanism of near-field probe is essentially designed. In this paper, we suggest the slider similar with conventional HDD and design the slider using near-field probe for the purpose of applying the slider in order to control gap between probe and media. The most important object of slider design is to guarantee the flying ability and stability. For achievement of these design objects, we perform two step of optimal design process. The media is supposed to model as random displacement, which is only considered roughness of disk surface. The design slider is analyzed with dynamic state in assumed media. At this process, the optimal model is confirmed to stable flying stability.

  • PDF

분말활성탄을 활용한 미세먼지 흡착형 경화체의 물리적 특성 (Physical Properties of Fine Dust Adsorption Matrix using Powder Activate Carbon)

  • 이원규;김연호;경인수;이상수
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2019년도 추계 학술논문 발표대회
    • /
    • pp.172-173
    • /
    • 2019
  • As the damage to fine dust increased, the Republic of Korea designated fine dust as a social disaster. The composition of the fine dust is composed of carbon, sulfate, nitrate, ammonium and minerals. The cause of fine dust is naturally generated by dirt, pollen, etc. In addition, there are artificial causes such as gaseous vehicle exhaust gas emitted from the use of fossil fuel. When fine dust enters the human body through breathing, it causes various respiratory diseases and skin diseases. In IARC, fine dust was designated as a carcinogen group 1. In this research, we tried to adsorb fine dust by physical adsorption using powdered activate carbon. Powdered activate carbon is a powdered activated carbon activated in a carbonized state. Porous material with high specific surface area and low density. Experimental items were tested for density, water absorption, and fine dust concentration according to the PAC addition ratio. Basic experiments were carried out to fabricate the fine dust adsorption matrix.

  • PDF

마그네슘 합금 안경테의 Plasma Electrolytic Oxidation 표면처리 효과 연구 (A Study on Plasma Electrolytic Oxidation Surface Treatments for Magnesium Alloy Eyeglass Frames)

  • 김기홍
    • 한국안광학회지
    • /
    • 제15권4호
    • /
    • pp.313-317
    • /
    • 2010
  • 목적: 이 연구 목적은 가공한 마그네슘 합금 AZ31 안경테를 plasma electrolytic oxidation(PEO) 표면 처리 후 표면특성에 대하여 조사하는 것이다. 방법: Plasma electrolytic oxidation(PEO) 표면 처리는 DC 전압을 변화시키며 처리하였고, 피막의 상 분석은 X-ray 회절기로 측정하였고, 형태학적 미세구조는 주사전자현미경로 관찰하였다. 그리고 피막층에 존재하는 원소의 농도를 에너지 분산 X-선 스펙트럼으로 조사하였다. 결과: PEO 처리시 전압이 증가함에 따라 XRD 측정 결과 MgO 피크가 증가하였으며, SEM 사진에서는 표면의 산화피막이 조밀하게 생기는 것을 확인 할 수 있었다. 그리고 EDS에서 성분의 변화도 일치함을 보여주었다. 결론: PEO 산화피막층은 전압이 증가 할수록 MgO 화합물의 형성이 점점 증가하기 때문에 산화막의 결정화가 진행되며, 65V에 60초 처리 시 표면상태, 접촉각, 내식성 시험에서 가장 좋은 결과를 보여 주었다.

Surface Texturing한 평행 슬라이더 베어링의 열유체윤활 해석: 딤플 깊이의 영향 (Thermohydrodynamic Lubrication Analysis of Surface-Textured Parallel Slider Bearing: Effect of Dimple Depth)

  • 박태조;김민규
    • Tribology and Lubricants
    • /
    • 제33권6호
    • /
    • pp.288-295
    • /
    • 2017
  • In order to improve the efficiency and reliability of the machine, the friction should be minimized. The most widely used method to minimize friction is to maintain the fluid lubrication state. However, we can reduce friction only up to a certain limit because of viscosity. As a result of several recent studies, surface texturing has significantly reduced the friction in highly sliding machine elements, such as mechanical seals and thrust bearings. Thus far, theoretical studies have mainly focused on isothermal/iso-viscous conditions and have not taken into account the heat generation, caused by high viscous shear, and the temperature conditions on the bearing surface. In this study, we investigate the effect of dimple depth and film-temperature boundary conditions on the thermohydrodynamic (THD) lubrication of textured parallel slider bearings. We analyzed the continuity equation, the Navier-Stokes equation, the energy equation, and the temperature-viscosity and temperature-density relations using a computational fluid dynamics (CFD) code, FLUENT. We compare the temperature and pressure distributions at various dimple depths. The increase in oil temperature caused by viscous shear was higher in the dimple than in the bearing outlet because of the action of the strong vortex generated in the dimple. The lubrication characteristics significantly change with variations in the dimple depths and film-temperature boundary conditions. We can use the current results as basic data for optimum surface texturing; however, further studies are required for various temperature boundary conditions.