• 제목/요약/키워드: Surface stabilizer

검색결과 149건 처리시간 0.026초

휴대용 고농도 과산화수소 측정 전극의 개발 (Development of Portable-Type Electrode for the Determination of Highly Concentrated Hydrogen Peroxide)

  • 이진서;최강;김상진;차근식;남학현;노경래;김진두
    • 분석과학
    • /
    • 제12권2호
    • /
    • pp.125-129
    • /
    • 1999
  • 고농도의 과산화수소(10-75%)를 생산현장에서 손쉽게 측정할 수 있는 전극 센서 시스템을 연구하였다. Teflon 전극체는 휴대에 간편하도록 길이 10 cm, 지금 1.5 cm의 봉 형태로 제작하였고, 작업 극으로는 직경 3 mm의 glassy carbon을, 보조전극으로는 내경 5 mm, 외경 9 mm의 흑연을 전극물질로 사용하였다. 과산화수소 산화전위는 0.8 V의 전위를 걸어주었다. 공장에서 생산된 고농도의 과산화수소를 일정 이온강도의 전해질 용액으로 희석해 10% 이하의 농도가 되도록 하면 과산화수소에 첨가된 안정제의 방해작용과 과산화수소의 산화작용으로 인한 전극표면의 변성을 최소화할 수 있었고, 손쉽게 정량적인 측정을 할 수 있었다. 또한 과산화수소 투과막(teflon membrane${\leq}100{\mu}m$)을 입힌 전극을 이용하면 고농도의 과산화수소를 희석하지 않고 재현성 있게 정량할 수 있었다. 반면 투과막을 이용하는 방법을 내부전해질을 자주 교환해야 하는 단점이 있었다.

  • PDF

피커링 에멀젼을 형판으로 하는 $SiO_2-TiO_2$ 다공성 분체의 제조 (Preparation of $SiO_2-TiO_2$ Porous Composite Pigments Using a Pickering Emulsion Method as Template)

  • 이상길;김영호;홍준기;표형배;이동규
    • 한국응용과학기술학회지
    • /
    • 제29권3호
    • /
    • pp.377-392
    • /
    • 2012
  • 작은 고체 분체들은 피커링 유화 체계에서 안정화제로 작용하는 것은 이미 알려진 사실이다. 이 연구에서 우리는 알킬실란 처리 $TiO_2$와 n-헥실알코올, 수계로 안정한 피커링 에멀젼을 제조하였다. $TiO_2$ 입자에 의해 안정화된 피커링 에멀젼을 제조하기 위한 최적의 조건은 $TiO_2$ 입자의 양과 수상/유상의 비에 의해 결정된다. 피커링 에멀젼의 형태는 물과 n-헥실알코올에 대한 입자들의 젖음성에 의존된다. 피커링 에멀젼은 $TiO_2$가 5.00 wt%, 오일과 수상의 비가 3 : 7인 경우에 가장 안정하였다. 피커링 에멀젼을 형판으로 하여 무기 전조체를 졸-겔 공정에 의해 다공성 분체들이 합성되었다. 합성된 다공성 분체들은 광학 현미경, SEM, BET, XRD 및 EDS에 의해 확인되었다.

A Review on Spray Characteristics of Bioethanol and Its Blended Fuels in CI Engines

  • No, Soo-Young
    • 한국분무공학회지
    • /
    • 제19권4호
    • /
    • pp.155-166
    • /
    • 2014
  • This review will be concentrated on the spray characteristics of bioethanol and its derived fuels such as ethanol-diesel, ethanol-biodiesel in compression ignition (CI) engines. The difficulty in meeting the severe limitations on NOx and PM emissions in CI engines has brought about many methods for the application of ethanol because ethanol diffusion flames in engine produce virtually no soot. The most popular method for the application of ethanol as a fuel in CI engines is the blending of ethanol with diesel. The physical properties of ethanol and its derivatives related to spray characteristics such as viscosity, density and surface tension are discussed. Viscosity and density of e-diesel and e-biodiesel generally are decreased with increase in ethanol content and temperature. More than 22% and 30% of ethanol addition would not satisfied the requirement of viscosity and density in EN 590, respectively. Investigation of neat ethanol sprays in CI engines was conducted by very few researchers. The effect of ambient temperature on liquid phase penetration is a controversial topic due to the opposite result between two studies. More researches are required for the spray characteristics of neat ethanol in CI engines. The ethanol blended fuels in CI engines can be classified into ethanol-diesel blend (e-diesel) and ethanol-biodiesel (e-biodiesel) blend. Even though dodecanol and n-butanol are rarely used, the addition of biodiesel as blend stabilizer is the prevailing method because it has the advantage of increasing the biofuel concentration in diesel fuel. Spray penetration and SMD of e-diesel and e-biodiesel decrease with increase in ethanol concentration, and in ambient pressure. However, spray angle is increased with increase in the ethanol percentage in e-diesel. As the ambient pressure increases, liquid phase penetration was decreased, but spray angle was increased in e-diesel. The increase in ambient temperature showed the slight effect on liquid phase penetration, but spray angle was decreased. A numerical study of micro-explosion concluded that the optimum composition of e-diesel binary mixture for micro-explosion was approximately E50D50, while that of e-biodiesel binary mixture was E30B70 due to the lower volatility of biodiesel. Adding less volatile biodiesel into the ternary mixture of ethanol-biodiesel-diesel can remarkably enhance micro-explosion. Addition of ethanol up to 20% in e-biodiesel showed no effect on spray penetration. However, increase of nozzle orifice diameter results in increase of spray penetration. The more study on liquid phase penetration and SMD in e-diesel and e-biodiesel is required.

Myo-inositol increases the plating efficiency of protoplast derived from cotyledon of cabbage (Brassica oleracea var. capitata)

  • Jie, Eun-Yee;Kim, Suk-Weon;Jang, Hye-Rim;In, Dong-Su;Liu, Jang-Ryol
    • Journal of Plant Biotechnology
    • /
    • 제38권1호
    • /
    • pp.69-76
    • /
    • 2011
  • This study describes the effect of myo-inositol on sustained cell division and plant regeneration from cotyledon-derived protoplast of cabbage (Brassica oleracea var. capitata). Freshly isolated protoplasts were cultured in modified Murashige and Skoog (MS) medium removed ammonia ions and containing $0.4\;mg\;l^{-1}$ thiamine HCl, $100\;mg\;l^{-1}$ myo-inositol, $2\;mgl^{-1}$ 2,4-D, $0.5\;mgl^{-1}$ BA, $30\;gl^{-1}$ sucrose and several concentrations of myo-inositol (2, 4, 6, 8, 10% (w/v)) as an osmotic stabilizer. After 3 weeks of culture in the dark at $25^{\circ}C$, the plating efficiency of cabbage protoplasts reached to $22.5{\pm}2.9%$ when cultured in modified MS medium supplemented with $2\;mgl^{-1}$ 2,4-D, $0.5\;mgl^{-1}$ BA, $30\;gl^{-1}$ sucrose and 8% (w/v) of myo-inositol at a density of $2{\times}10^5$ protoplasts/ml. Rapidly growing cell colonies after 3 weeks of culture were transferred to the same culture medium removed osmoticum. To induce shoot regeneration from calluses, calluses with about 2 mm in diameter were transferred to the MS medium containing $2\;mgl^{-1}$ BA and $0.5\;mgl^{-1}$ NAA. After further three weeks of incubation onto the medium in the light, green shoots were formed on the surface of calluses at a frequency of 30%. Upon transfer to half-strength MS basal medium, roots were formed onto the bottom of regenerated shoots without auxin treatments. These regenerated plantlets were successfully acclimatized to soil transfer, grown to normal mature plants. The cabbage protoplast culture system established in this study could be applied for production of somatic hybrids or cybrids by asymmetric protoplast fusion and mass proliferation of elite somatic clones of cabbage.

바이오차르 토양투입에 따른 온실가스 발생 변화 연구 (Greenhouse Gas Emissions from Soils Amended with Biochar)

  • 유가영;손용익;이승현;유예나;이상학
    • 환경생물
    • /
    • 제31권4호
    • /
    • pp.471-477
    • /
    • 2013
  • Biochar amendment to agricultural soil is regarded as a promising option to mitigate climate change and enhance soil quality. It could sequester more carbon within the soil system and increase plant yield by changing soil physicochemical characteristics. However, sustainable use of biochar requires comprehensive environmental assessment. In this sense, it is important to measure additional greenhouse gas emission from soils after biochar addition. We investigated emissions of $CO_2$, $N_2O$, and $CH_4$ from incubated soils collected from rice paddy and cultivated grassland after amendment of 3% biochar (wt.) produced from rice chaff. During incubation, soils were exposed to three wet-dry cycles ranging from 5~85% soil gravimetric water content (WC) to investigate the changes in effect of biochar when influenced by different water levels. The $CO_2$ emission was reduced in biochar treatment compared to the control at WC of 30~70% both in rice paddy and grassland soils. This indicates that biochar could function as a stabilizer for soil organic carbon and it can be effective in carbon sequestration. The $N_2O$ emission was also reduced from the grassland soil treated with biochar when WC was greater than 30% because the biochar treated soils had lower denitrification due to better aeration. In the rice paddy soil, biochar addition resulted in decrease in $N_2O$ emission when WC was greater than 70%, while an increase was noted when WC was between 30~70%. This increase might be related to the fact that available nutrients on biochar surface stimulated existing nitrifying bacterial community, resulting in higher $N_2O$ emission. Overall results imply that biochar amendment to agricultural soil can stabilize soil carbon from fast decomposition although attention should be paid to additional $N_2O$ emission when biochar addition is combined with the application of nitrogen fertilizer.

금관가야 유리구슬의 특성 분석 (I) (A Characteristic Analysis of Glass Beads in Geumgwan Gaya, Korea (I))

  • 김은아;이제현;김규호
    • 보존과학회지
    • /
    • 제37권3호
    • /
    • pp.232-244
    • /
    • 2021
  • 본 연구는 금관가야가 위치한 김해지역에서 출토된 유리구슬을 중심으로 색상, 크기 및 형태, 열처리 등 외형적 특징과 비파괴 분석을 통하여 화학 조성을 융제, 안정제, 착색제 특성으로 분류해 보았다. 금관가야 유리구슬 129점은 8가지 색상 계통으로 분류되며 이 중에서 67% 점유하는 감청색이 대표적인 색상이다. 크기는 외경을 기준으로 3가지로 구분한 결과, 시기가 지남에 따라 대형화하는 양상을 보인다. 형태는 내경과 직경을 기준으로 대롱형, 둥근형, 도넛형으로 구분되며 둥근형이 대표적이다. 늘린기법으로 제작된 유리구슬 단면은 열처리 정도에 3가지 유형이 확인된다. 구슬 양끝이 모두 열처리된 HT-III형이 주류이고 다른 유형에 비하여 열처리 기술이 높은 단계로 추정된다. 비파괴분석에서 확인되는 화학 조성은 포타쉬유리군 63점과 소다유리군 9점이다. 고찰 결과, 금관가야 유리구슬은 색상, 크기, 형태, 제작기법을 포함한 외형적 특징은 화학 조성과 상관성을 보이며 시기별, 지역별에 따른 특징이 나타난다.

느타리버섯과 여름느타리버섯의 원형질체(原形質體) 나출(裸出)과 재생(再生) (Protoplast Formation, Regeneration and Reversion in Pleurotus ostreatus and P. sajor-caju)

  • 고승주;신관철;유영복
    • 한국균학회지
    • /
    • 제13권3호
    • /
    • pp.169-177
    • /
    • 1985
  • 느타리버섯Pleurotus ostreatus 및 여름느타리버섯Pleurotus sajor-caju의 원형질체(原形質體)는 감자배지(培地)(PSA) 및 버섯 완전배지(完全培地) (MCM)에 cellophan 반투석막(半透析膜)을 피복(被覆)하여 배양(培養)한 균사체(菌絲體)에서 $2.4{\time}l0^6{\sim}3.5{\time}10^7$ 으로 많이 나출(裸出)되었다. 버섯 완전배지(完全培地)에 4일간(日間) 배양(培養)한 균사체(菌絲體)를 pH가 6.0인 인산(燐酸) 완충용액(緩衝溶液)에 세포벽(細胞壁) 분해효소(分解酵素)인 Novozym 234를 5 mg/ml 농도(濃度)로 용해(溶解)한 효소용액(酵素溶液)에 4시간(時間) 처리(處理)하였을 때 원형질체(原形質體)의 나출수(裸出數)가 가장 많았다. 이들 균주(菌株)의 원형질체(原形質體) 나출(裸出) 시(時) 삼투압 조절제(調節劑)로는 0.6 M sucrose와 0.6 M $MgSO_4$가 가장 적합(適合)하였다. 한편 원형질체(原形質體)의 재생(再生) 시(時)에는 삼투압 조절제(調節劑)로 0.6 M sucrose와 0.6M KCl를 사용(使用)하였을 때 높은 재생율(再生率)을 보였다. 원형질체(原形質體)는 재생용(再生用) 배지(培地)에 접종(接種)한 후 0.75% agar 배지(培地)를 피복(被覆)하였을 때 재생율(再生率)이 향상(向上)되었으며, 이때 300 ppm ampicillin 을 0.75% agar 배지(培地)에 혼합(混合)하여 처리(處理)한 결과(結果) 세균(細菌)의 오염(汚染)을 방지(防止)할 수 있었다. 이들 균주(菌株)의 원형질체(原形質體)는 정상적(正常的)인 균사체(菌絲體)로 환원(還元)되었으며 균사체(菌絲體)는 정상적(正常的)으로 생장(生長)하여 자실체(子實體)와 담자포자(擔子胞子)를 형성(形成)하였다.$1.6{\times}10^{-6}M$로 1 mM ouabain에 영향을 받는 K-pNPPase 활성 및 산소 소모량을 50% 억제하는 농도보다 ouabain은 약 5배 vanadate는 약 15배 정도 낮았다. 이상의 결과로 미루어 가토 신피질 절편에서 측정한 K-pNPPase활성은 $Na^+-K^+$교환 점프의 활성을 나타내는 좋은 지표가 될 수 있으며 특히 세포막을 통한 물질 이동이나 세포의 기능에 대한 영향과 Na-K-ATPase활성에 대한 영향을 동시에 보고자 할 때는 microsome에서 측정한 Na-K-ATPase활성보다 더 이상적이라고 사료된다.>의 dimer 상태로 존재하거나 혹은 $(\alpha\beta)_2$의 monomer에 glycolytic enzymes과 같은 다른 enzymes이 붙어 functional한 구조를 이루고 있는 것이 아닌가 사료된다. 또한 실헐성적은 이러한 dimeric association 혹은 heterocomplex association은 ghost를 만드는 과정에서나 strophanthidin의 처치로 부서질 수 있음을 암시하고 있다.ctor의 길이는 각선수군(各選手群)이 비선수(非選手)보다 낮은 경향(傾向) 나타냈으며, 특(特)히 horizontal plane에서 투척(投擲), 도약(跳躍), 단거리(短距離) 및 야구선수(野球選手)들이 비선수군(非選手群)보다 유의(有意)하게 낮았다. QRS와 T vector의 길이는 선수군(選手群)과 비선수군간(非選手群間)에 차이(差異)가 없었고, 야구선수(野球選手)만이 frontal plane에서 QRS vector의 길이가 비선수군(非選手群)보다 높았다. 이상(以上)의 결과(結果)를 종합(綜合)해 보면 각종목(各種目) 운동선수군(運動選手群) 전반(全般)은 비선수(非選手)보다 유의(有意)

  • PDF

캔 제품의 bisphenol A diglycidyl ether (BADGE), bisphenol F diglycidyl ether (BFDGE) 유도체 및 분해산물 분석법 (Determination of the Levels of Bisphenol A Diglycidyl Ether (BADGE), Bisphenol F Diglycidyl Ether (BFDGE) and Their Reaction Products in Canned Foods Circulated at Korean Markets)

  • 김희연;이진숙;조민자;양지연;백지윤;정소영;최선희;김영선;최재천
    • 한국식품과학회지
    • /
    • 제42권1호
    • /
    • pp.8-13
    • /
    • 2010
  • 캔제품 중 Biphenol A diglycidyl ether(BADGE), bisphenol F diglycidyl ether(BFDGE) 및 그 분해산물인 BADGE $H_2O$, BADGE $2H_2O$, BADGE HCl, BADGE 2HCl, BADGE HCl $H_2O$, BFDGE $H_2O$, BFDGE $2H_2O$, BFDGE HCl, BFDGE 2HCl, BFDGE HCl $H_2O$ 등의 HPLC/FLD와 HPLC/APCI-MS에 의한 정성 및 정량방법을 확립하고 133개 캔 제품을 사용하여 분석방법의 재현성을 검토하였다. 수용성 식품의 경우 BADGE $2H_2O$가 13개 제품에서 0.400-0.888 mg/kg, BADGE HCl $H_2O$가 1개 제품에서 0.566 mg/kg, BFDGE $H_2O$가 3개 제품에서 0.489-0.664 mg/kg, BFDGE $2H_2O$가 3개 제품에서 0.455-0.846 mg/kg, BFDGE HCl $H_2O$가 2개 제품에서 0.455-0.752 mg/kg의 농도로 검출되었다. 지용성 식품의 경우에는 BADGE가 3개 제품에서 0.093-0.486 mg/kg, BADGE $H_2O$가 1개 제품에서 0.183 mg/kg, BADGE HCl이 1개 제품에서 0.097 mg/kg, BADGE 2HCl이 7개 제품에서 0.200-0.452 mg/kg, BFDGE가 3개 제품에서 0.438-0.506 mg/kg, BFDGE $2H_2O$가 1개 제품에서 0.295 mg/kg, BFDGE HCl 및 BFDGE 2HCl이 1개 제품에서 0.324 mg/kg의 농도로 검출되었다. 분석방법의 재현성은 우수하였고, 모니터링 결과는 EU 수준과 유사하거나 안전한 수준으로 나타났다.

자기공명 영상 및 3차원 영상을 이용한 견관절 관절낭-인대의 해부학적 연구. 역동학적 생체연구 (A Study of the Capsuloligamentous Anatomy of the Glenohumeral Joint Using Magnetic Resonance Imaging and Three-Dimensional Imaging. Dynamic In Vivo Study)

  • 박태수;최일용;주경빈;김선일;김준식;백두진
    • 대한관절경학회지
    • /
    • 제4권2호
    • /
    • pp.154-158
    • /
    • 2000
  • 목적 : 정상견관절의 각기 다른 위치에 따른 관절와 상완 인대들의 해부학적 구조 변화를 관찰하고자 하였다. 대상 및 방법 : 정상 견관절 9례에 대하여 생리식염수를 주입하고 외전 및 외 회전의 위치를 달리하여(각각 $0^{\circ}$$0^{\circ},\;45^{\circ}$$25^{\circ},\;90^{\circ}$ 및 최대 외 회전) 자기공명 영상을 각각 촬영하고 이를 이용하여 3차원 영상을 재구성한 후 관절와상완 인대 특히 중 및 하 관절와 상완 인대를 관찰하였다. 결과:. 중 관절와 상완 인대는 $0^{\circ}$ 외전 및 $0^{\circ}$ 외 회전시 상완골 두의 전면 적도를 중심으로 상하부에 걸쳐 이중 곡선 모양으로 비스듬히 위치하였다가, 외전 및 외 회전이 점차 증가하여 $45^{\circ}$$25^{\circ}$에 이르면 점차 상완골 두의 전면 적도 부근에 신장되어 거의 직선에 가까운 비스듬한 주행을 보였으며, $90^{\circ}$ 외전 및 최대 외회전시 상완골 두의 전면 적도의 상부 위치에 다시 곡선 모양을 보였다. 반면 하 관절와 상완 인대는 $0^{\circ}$ 외전 및 $0^{\circ}$ 외 회전시 상완골 두의 전면 하부에서 완만한 곡선 모양으로 위치하였으며, 외전 및 외회전이 증가함에 따라 상완골 두의 전면 적도 아래에 위치하면서 아래쪽으로 볼록한 곡선 모양을 보였다가, $90^{\circ}$ 외전 및 최대 외 회전시 상완골 두의 전면 하부에 거의 직선에 가깝도록 신장되어 비스듬히 위치하였다. 결론 : 견관절을 $45^{\circ}$ 외전 및 $25^{\circ}$ 외 회전 할 때와 $90^{\circ}$ 외전 및 최대 외 회전 시 중 관절와 상완 인대 및 하 관절와 상완 인대가 각각 신장되어 관절와 상완 관절의 중요한 정적 안정화 구조물로서 작용한다고 사료된다.

  • PDF