• 제목/요약/키워드: Surface response analysis

Search Result 1,760, Processing Time 0.038 seconds

반응표면분석에 의한 쇠고기 야채 쌀죽의 이화학적 및 관능적 특성 변화

  • 이용욱;금준석;은종방
    • Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
    • /
    • 2003.10a
    • /
    • pp.167.2-168
    • /
    • 2003
  • 현대 사회는 서구적인 식생활의 변화로 인해 조리가 간편하고 조리 시간이 짧은 즉석식품과 영양 기호식품을 동시에 충족시켜주는 음식에 대한 소비가 늘고 있는 실정이다. 또한 최근 미곡의 공급량에 비해서 소비량이 해마다 감소하여 재고미의 증가를 볼 때, 쌀의 새로운 이용방법 모색이 절실히 요망된다. 따라서 쌀의 소비촉진과 현대사회의 소비형태를 접목시켜서 쇠고기와 야채를 이용한 즉석쌀죽을 개발하고자 하였다. 쇠고기, 야채 및 쌀가루를 이용한 soup mix의 최적 배합비를 설정하기 위하여 제조조건에 따라 다르게 제조한 쇠고기 야채 쌀죽의 이화학적 및 관능적 특성에 미치는 변화를 조사하였다. 이때 야채의 배합비에 따른 이화학적 및 관능적 특성을 모니터링 하고자 반응표면분석법 (response surface methodology, RSM)을 이용하였다. 요인변수(Xn)를 쌀의 양에 대한 버섯의 비율 (X$_1$), 당근의 비율 (X$_2$), 대파의 비율 (X$_3$)로 하여 중심합성계획에 따라 17실험구로 구분하여 조리실험을 실시하였고, 반응변수(Yn)는 soup mix를 이용하여 제조한 쇠고기 야채 쌀죽의 이화학적 특성인 색도의 L*값 (Y$_1$), a*값 (Y$_2$), b*값 (Y$_3$), 점도(Y$_4$), 퍼짐성 (Y$_{5}$), 고형분 함량(Y$_{6}$), PH (Y$_{7}$)으로 하였으며 관능적 특성인 색 (Y$_{8}$), 향 (Y$_{9}$), 점성 (Y$_{10}$), 맛 (Y$_{11}$), 전체적인 기호도 (Y$_{12}$)를 종속변수로 하여 회귀분석에 이용하였다. 회귀분석에 의한 모델식의 예측에는 SAS (statistical analysis system)program을 사용하였으며, 3차원 반응표면 분석법으로 해석하였다. 야채의 배합비에 따라 제조한 쇠고기 야채 쌀죽의 물리적 특성인 색도의 L*, a*, b* 값에 대한 반응표면 회귀식의 $R^2$은 각각 0.6098(p> 0.05), 0.8803 (p <0.05), 0.6781(p> 0.05)로서 b값에 있어서 그 유의성이 5%수준에서 인정되어 b값에 미치는 영향이 크다는 것을 알 수 있었다. L*값은 63-68사이로, a*값은 0.13에서 -0.89사이를 b*값은 2-5값 사이에서 변화하여 제조한 죽의 색이 옅은 황색임을 알 수 있었다. 고형분 함량, 퍼짐성과 pH에 대한 $R^2$은 각각 0.4280, 0.5433과 0.2406임을 볼 때 버섯, 당근, 대파의 비율에 따라 제조한 쇠고기 야채 쌀죽의 고형분 함량, 퍼짐성과 pH는 설정된 범위내에서 그 유의성이 인정되지 않아 큰 영향을 미치지 않음을 알 수 있었다. 관능검사 결과, 색과 향에 대한 반응표면 회귀식의 $R^2$은 각각0.6000과 0.7825이고 P-value는 각각 0.4290과 0.0942로서 5% 수준에서 유의한 상관성이 없음을 확인할 수 있었다. 맛과 점성에 대한 $R^2$은 0.8717과 0.8068이고 P-value는 각각 0.0195 (p <0.05)와 0.0612로서 야채의 배합비에 따라 맛에 있어서 유의확률 5%수준에서 그 유의성이 인정되었으며, 전체적인 기호도에 대한 유의성은 $R^2$이 0.8463이고 P-value는 0.0344 (p <0.05)임을 볼 때, 설정된 범위내에서 야채의 배합비에 따라 제조한 쇠고기 야채 쌀죽의 맛과 기호도에 큰 영향을 미치는 것을 알 수 있었다. 그리고 최대 임계점이 버섯의 첨가량은 0.99%, 당근의 첨가량은 0.97%, 대파의 첨가량은 0.59%에서 최적 반응표면을 나타내었다. 이상의 결과로 볼 때, 야채의 배합비에 따른 맛과 전체적인 기호도에 있어서 그 유의성이 5%수준에서 모두 유의한 상관관계를 보였으며, soup mix 제조시 쌀가루 양에 대한 야채의 최적 배합비는 버섯, 당근, 대파에 있어서 각각 0.99, 0.97과 0.59%임을 알 수 있었다.

  • PDF

Optimization of Processing Conditions for the Production of Puffed Rice (팽화미 제조 공정조건의 최적화)

  • Cheon, Hee Soon;Cho, Won Il;Jhin, Changho;Back, Kyeong Hwan;Ryu, Kyung Heon;Lim, Su Youn;Chung, Myong Soo;Choi, Jun Bong;Lim, Taehwan;Hwang, Keum Taek
    • Culinary science and hospitality research
    • /
    • v.21 no.1
    • /
    • pp.77-89
    • /
    • 2015
  • The objective of this study was to optimize processing conditions for the production of an instant puffed rice product using response surface methodology (RSM) and contour analysis. Sensory and texture qualities, and physical properties of the puffed rice were analyzed with various processing conditions related to drying and puffing temperature, and moisture content. Preference, color intensity, cohesiveness, rehydration ratio, density and lightness of the puffed rice product significantly varied depending on the processing conditions. The responses showed high $R^2$ values (0.623, 0.852, 0.735, 0.688, and 0.790) and lack-of-fit. Rehydration ratio was found to have a negative correlation with density in the condition of drying and puffing temperature. Lightness and preference scores of the puffed rice increased as the moisture content increased. According to RSM, the preference scores were very highly related to the moisture content, and the optimum processing conditions of the puffed rice product were at $40^{\circ}C$ of drying temperature, with 11.0% of moisture content, and at $232.7^{\circ}C$ of puffing temperature.

Effects of Soaking Conditions on the Manufacture of Calcium Enriched Rice (침지조건이 칼슘 강화미 제조에 미치는 영향)

  • Yang, Seung-Joon;Min, Young-Kyoo;Jeong, Heon-Sang;Cho, Kyeong-Ju;Park, Kwang-Soon
    • Korean Journal of Food Science and Technology
    • /
    • v.35 no.4
    • /
    • pp.604-609
    • /
    • 2003
  • In order to investigate the transfer rate of calcium into rice and the effect of soaking conditions-temperature (20, 30, 40, 50 and $60^{\circ}C$, $X_1$), calcium concentration of soaking solution (0, 250, 500, 750 and 1000 mg/L, $X_2$) and soaking time (5, 10, 15, 20 and 25 min, $X_3$), moisture absorption rate, hardness and calcium content of rice after soaking were analyzed. When the soaking temperature and time were increased the moisture absorption rate also increased (p<0.01). Quadratic and interaction effects on the moisture absorption rate among variables were highly significant, within 5%. The predictive model for moisture absorption rate $(Y_1)$ was as follows: $Y=16.14+0.78X_1+1.24X_3-0.23X_1{^2}+0.14X_2{^2}-0.42X_3X_1-0.38X_3{^2}\;(R^2=0.9123)$. Hardness was decreased as soaking time and temperature increased. Calcium contents of soaked rice increased as temperature, the calcium concentration of soaking solution and soaking time were increased (p<0.01). Also the interactive effect between soaking time and calcium concentration of soaking solution was high. The predictive model for calcium content $(Y_3)$ was as follows: $Y_3=470.80+110.87X_1+123.47X_2+52.29X_3-7.42X_1{^2}-14.87X_2{^2}-9.49X_3X_2-20.57X_3{^2}\;(R^2=0.9840)$. From the results in this study, if adults and children take 400 g of calcium enriched rice with 600 mg/kg and $700{\sim}900\;mg/kg$, respectively, they can expect to take more calcium than the recommended intake without other calcium reinforcing agents.

Optimization of Supercritical Water Oxidation(SCWO) Process for Decomposing Nitromethane (Nitromethane 분해를 위한 초임계수 산화(SCWO) 공정 최적화)

  • Han, Joo Hee;Jeong, Chang Mo;Do, Seung Hoe;Han, Kee Do;Sin, Yeong Ho
    • Korean Chemical Engineering Research
    • /
    • v.44 no.6
    • /
    • pp.659-668
    • /
    • 2006
  • The optimization of supercritical water oxidation (SCWO) process for decomposing nitromethane was studied by means of a design of experiments. The optimum operating region for the SCWO process to minimize COD and T-N of treated water was obtained in a lab scale unit. The authors had compared the results from a SCWO pilot plant with those from a lab scale system to explore the problems of scale-up of SCWO process. The COD and T-N in treated waters were selected as key process output variables (KPOV) for optimization, and the reaction temperature (Temp) and the mole ratio of nitromethane to ammonium hydroxide (NAR) were selected as key process input variables (KPIV) through the preliminary tests. The central composite design as a statistical design of experiments was applied to the optimization, and the experimental results were analyzed by means of the response surface method. From the main effects analysis, it was declared that COD of treated water steeply decreased with increasing Temp but slightly decreased with an increase in NAR, and T-N decreased with increasing both Temp and NAR. At lower Temp as $420{\sim}430^{\circ}C$, the T-N steeply decreased with an increase in NAR, however its variation was negligible at higher Temp above $450^{\circ}C$. The regression equations for COD and T-N were obtained as quadratic models with coded Temp and NAR, and they were confirmed with coefficient of determination ($r^2$) and normality of standardized residuals. The optimum operating region was defined as Temp $450-460^{\circ}C$ and NAR 1.03-1.08 by the intersection area of COD < 2 mg/L and T-N < 40 mg/L with regression equations and considering corrosion prevention. To confirm the optimization results and investigate the scale-up problems of SCWO process, the nitromethane was decomposed in a pilot plant. The experimental results from a SCWO pilot plant were compared with regression equations of COD and T-N, respectively. The results of COD and T-N from a pilot plant could be predicted well with regression equations which were derived in a lab scale SCWO system, although the errors of pilot plant data were larger than lab ones. The predictabilities were confirmed by the parity plots and the normality analyses of standardized residuals.

Effects of Organic Amendments on Introducing Pioneer Herbaceous Plants in the Abandoned Zinc Mine Soil Revegetation (아연 폐광산에 식생도입을 위한 유기성 토양 개량제의 처리효과)

  • Kim Dae-Yeon;Lee Sang-Hwan;Jung Jin-Ho;Kim Jeong-Gyu
    • Journal of Soil and Groundwater Environment
    • /
    • v.11 no.3
    • /
    • pp.43-51
    • /
    • 2006
  • Generally abandoned mine soils have serious problems for introducing vegetation such as nutrient deficiency, poor physical properties, and phytotoxicity due to high levels of heavy metals. It is required to improve soil amenity for revegetation. One of its strategies is using organic materials such as compost manure and sludge. The pot experiments was conducted to evaluate the effects of pig manure and municipal sewage sludge on revegetation of mining area soil surface with Artemisia princeps and Zoysia japonica. Application rate of pig manure and municipal sewage sludge was $75{\sim}225$ Mg/ha and $150{\sim}450$ Mg/ha, respectively. The results showed that the application of manure and sludge increased organic matter about two-fold and total nitrogen contents about five-fold of mine soil and improved the growth of plants in all treatments compared to the control. The result of plant tissue analysis showed that both plants accumulate Cd, Cu and Zn in root tissue rather than shoot tissues. Increased sludge application reduced Zn accumulation in both plant tissue. Sequential extraction results indicated that addition of soil amendment induced increment of organically bound fractions of Cu and Zn. Organically bound fraction of Zn was significantly increased from 7.84% to 13.58% in Artemisia princeps planted soil and from 7.84% to 14.16% in Zoysia japonica planted soil, thereby bioavailability of heavy metals was reduced. The results suggested that application of organic materials to mine soil can reduce phytotoxicity of heavy metals and be helpful in introducing successful revegetation.

A Study on Real-Time Defect Detection Using Ultrasound Excited Thermography (초음파 서모그라피를 이용한 실시간 결함 검출에 대한 연구)

  • Cho, Jai-Wan;Seo, Yong-Chil;Jung, Seung-Ho;Jung, Hyun-Kyu;Kim, Seung-Ho
    • Journal of the Korean Society for Nondestructive Testing
    • /
    • v.26 no.4
    • /
    • pp.211-219
    • /
    • 2006
  • The UET(ultrasound excited thermography) for the ,eat-time diagnostics of the object employs an infrared camera to image defects of the surface and subsurface which are locally heated using high-frequency putted ultrasonic excitation. The dissipation of high-power ultrasonic energy around the feces of the defects causes an increase In temperature. The defect's image appears as a hot spot (bright IR source) within a dark background field. The UET for nondestructive diagnostic and evaluation is based on the image analysis of the hot spot as a local response to ultrasonic excited heat deposition. In this paper the applicability of VET for fast imaging of defect is described. The ultrasonic energy is injected into the sample through a transducer in the vertical and horizontal directions respectively. The voltage applied to the transducer is measured by digital oscilloscope, and the waveform are compared. Measurements were performed on four kinds of materials: SUS fatigue crack specimen(thickness 14mm), PCB plate(1.8 mm), CFRP plate(3 mm) and Inconel 600 plate (1 mm). A high power ultrasonic energy with pulse durations of 250ms Is injected into the samples in the horizontal and vertical directions respectively The obtained experimental result reveals that the dissipation loss of the ultrasonic energy In the vertical injection is less than that in the horizontal direction. In the cafe or PCB, CFRP, the size of hot spot in the vortical injection if larger than that in horizontal direction. Duration time of the hot spot in the vertical direction is three times as long as that in the horizontal direction. In the case of Inconel 600 plate and SUS sample, the hot spot in the horizontal injection was detected faster than that in the vertical direction

Environmental Impacts of Food Waste Compost Application on Paddy Soil (음식물쓰레기 퇴비 시용이 논토양에 미치는 영향)

  • So, Kyu-Ho;Seong, Ki-Seog;Seo, Myung-Chul;Hong, Seung-Gil
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.40 no.1
    • /
    • pp.85-94
    • /
    • 2007
  • To determine the influence of food waste compost (FWC) application on paddy soil, FWC was applied to the paddy soil and then compared with farmer's practice as to the effects on rice and soil environment. Initially, pig manure compost (PMC) had high content of phosphorus ($15g\;kg^{-1}$) and potassium ($23g\;kg^{-1}$), while FWC had high content of total nitrogen ($13g\;kg^{-1}$) and salinity ($18.5g\;kg^{-1}$). Comparison was also made between chemical fertilizer and FWC use as a trial in the paddy field under the clay loam and sandy loam soil. In the panicle formation stage, chemical fertilizer application was proper in clay loam while PMC application was proper in sandy loam. However, chemical fertilizer produced higher yield compared to compost treatment, both on clay loam and sandy loam with 20~25% and 17~19%, respectively. The lower yield in sandy loam maybe due to slow mineralization of compost such that the crop did not effectively use it. Organic matter content in paddy soil after experiment was higher in FWC and PMC plots compared to that in chemical fertilizer plots. But the other soil properties were comparable. Therefore, the FWC compost had little effect on soil when it use as a trial in paddy field. Likewise, after the application of FWC as a trial, analysis of nitrate nitrogen and ammonium nitrogen in the surface water and 60 cm depth of paddy soil water nine days after planting was done. Results revealed that concentration of ammonium nitrogen was similar to irrigation water while nitrate nitrogen concentration was not detected, and hence did not contribute to water pollution. It is concluded that the application of FWC in the paddy field had not affected on environmental pollution in the paddy field. But its use as compost during rice culture reduced yield quantity. Such study should include selection of compost material, amount and method of compost application.

Behavior Analysis of Concrete Structure under Blast Loading : (II) Blast Loading Response of Ultra High Strength Concrete and Reactive Powder Concrete Slabs (폭발하중을 받는 콘크리트 구조물의 실험적 거동분석 : (II) 초고강도 콘크리트 및 RPC 슬래브의 실험결과)

  • Yi, Na Hyun;Kim, Sung Bae;Kim, Jang-Ho Jay;Cho, Yun Gu
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.29 no.5A
    • /
    • pp.565-575
    • /
    • 2009
  • In recent years, there have been numerous explosion-related accidents due to military and terrorist activities. Such incidents caused not only damages to structures but also human casualties, especially in urban areas. To protect structures and save human lives against explosion accidents, better understanding of the explosion effect on structures is needed. In an explosion, the blast load is applied to concrete structures as an impulsive load of extremely short duration with very high pressure and heat. Generally, concrete is known to have a relatively high blast resistance compared to other construction materials. However, normal strength concrete structures require higher strength to improve their resistance against impact and blast loads. Therefore, a new material with high-energy absorption capacity and high resistance to damage is needed for blast resistance design. Recently, Ultra High Strength Concrete(UHSC) and Reactive Powder Concrete(RPC) have been actively developed to significantly improve concrete strength. UHSC and RPC, can improve concrete strength, reduce member size and weight, and improve workability. High strength concrete are used to improve earthquake resistance and increase height and bridge span. Also, UHSC and RPC, can be implemented for blast resistance design of infrastructure susceptible to terror or impact such as 9.11 terror attack. Therefore, in this study, the blast tests are performed to investigate the behavior of UHSC and RPC slabs under blast loading. Blast wave characteristics including incident and reflected pressures as well as maximum and residual displacements and strains in steel and concrete surface are measured. Also, blast damages and failure modes were recorded for each specimen. From these tests, UHSC and RPC have shown to better blast explosions resistance compare to normal strength concrete.

Influence of Spring Warming in the Arctic-East Asia Region on the Arctic Oscillation and Dust Days in Korea Attributed to Dust Storms (북극-동아시아 지역의 봄철 온난화가 북극 진동-한국의 황사 사례일의 종관 기상에 미치는 영향 분석)

  • Ji-Sun Kim;Jae-Hee Cho;Hak-Sung Kim
    • Journal of the Korean earth science society
    • /
    • v.45 no.2
    • /
    • pp.121-135
    • /
    • 2024
  • This study examined the influence of near-surface atmospheric warming in the Arctic-East Asia region during spring (March-May) from 1991 to 2020 on the synoptic-scale meteorology of dust storm-induced dust days in Seoul, Korea, in response to the Arctic Oscillation. Increased springtime warming in the Arctic-East Asia region correlated with a reduction of six days in the occurrence of dust storm-induced dust days in Seoul, Korea, along with a decline in the intensity of these days by -1.6 ㎍ m-3yr-1 in PM10 mass concentration. The declining number of dust storm-induced dust days in Korea during the 2010s was the result of synoptic-scale meteorological analysis, which showed increased high-pressure activity as indicated by the negative potential vorticity unit. Moreover, a distinct pattern emerged in the distribution of dust storm-induced dust days in Korea based on the Arctic Oscillation Index (AOI), showing an increase in negative AOI and a decrease in positive AOI. Although the northward shift of the polar jet weakened the southerly low-pressure system activity over Mongolia and northern China, a reinforced high-pressure system formed over the Chinese continent during dust-storm-induced dust days with a negative AOI. This resulted in both a decrease in the frequency of dust-storm-induced dust days and reduction in wind speeds, facilitating their transport from source regions to Korea. Conversely, on days with positive AOIs, an extensive warm and stagnant high-pressure system dominated mainland China, accompanied by further cooling of the northern segment of the polar jet. A notable decline in wind speed in the lower troposphere across the Mongolia-northern China-Korea region diminished the occurrence of dust storm-induced dust days and also weakened their long-range transport.

Gelatinization Properties of Starch Dough with Moisture Content, Heating Temperature and Heating Time (수분함량, 가열온도 및 가열시간에 따른 전분 반죽의 호화특성)

  • Lee, Boo-Yong;Lee, Chang-Ho;Lee, Cherl-Ho
    • Korean Journal of Food Science and Technology
    • /
    • v.27 no.3
    • /
    • pp.428-438
    • /
    • 1995
  • The gelatinization properties of corn and waxy corn starch doughs were examined at various moisture contents, heating temperatures and heating times. The onset temperatures of gelatinization with 1% CMC using Brabender Amylograph were $64^{\circ}C$ for both corn and waxy corn starch. In the gelatinization properties using DSC, onset temperature$(T_o)$, maximum peak temperature$(T_p)$, completion temperature$(T_c)$ and enthalpy of the corn starch were $68.15^{\circ}C,\;74.01^{\circ}C,\;85.65^{\circ}C$ and $3.2\;cal/gram$ respectively. While those of the waxy corn starch were $68.24^{\circ}C,\;75.43^{\circ}C,\;93^{\circ}C$ and $4.2\;cal/gram$ respectively. In enzymatic analysis, when the moisture content increased from 36% to 52% and heating temperature from $60^{\circ}C$ to $100^{\circ}C$, the gelatinization degree of starch dough increased from about 10% to about 62%. The gelatinization degree of waxy corn starch dough was $15{\sim}20%$ higher than that of corn starch dough under the same gelatinization conditions. The regression equations of gelatinization degree (Y) of starch dough in the range of $36{\sim}52%$ moisture content $(X_1)\;60{\sim}100^{\circ}C$ heating temperature $(X_2)\;and\;0{\sim}2.0$ min heating time $(X_3)$ were examined using response surface analysis. The regression equation of corn starch dough was: $Y=28.659+8.638\;X_}+15.675\;X_2+7.770\;X_3-1.620\;{X_1}^2+10.790\;X_1X_2-4.220\;{X_2}^2+0.510\;X_1X_3+1.980\;X_2X_3-6.850\;{X_3}^2\;(R^2=0.9714)$ and that of waxy corn starch dough was: $Y=32.617+12.535\;X_1+20.470\;X_2+8.608\;X_3+4.093\;{X_1}^2+13.550\;X_1X_2-4.467\;{X_2}^2+1.560\;X_1X_3+2.160\;X_2X_3-9.527\;{X_3}^2$\;(R^2=0.9621)$. As the moisture content, heating temperature and heating time increased, the reaction rate constant(k) of gelatinization increased. The greatest reaction rate constant was observed at initial 0.5 min heating time of 1st gelatinization stage. At the heating temperature of $90^{\circ}C$, gelatinization of starch dough was completed almost in the initial 0.5 min heating time. The reaction rate constant of waxy corn starch dough was higher than that of corn starch dough under the same gelatinization conditions. At the 52% moisture content, the regression equation between reaction rate constant(k) and heating temperature(T) for corn starch dough was $log\;k=11.1140-4.1226{\times}10^3(1/T)$ (r=-0.9520) and that of waxy corn starch dough was $log\;k=10.1195-3.7090{\times}10^3(1/T)$ (r=-0.9064).

  • PDF