• Journal of the Korean institute of surface engineering
• /
• v.22 no.3
• /
• pp.109-117
• /
• 1989

The effect of heft treatment on the characteristic properties of insulation layer is studied for two kinds of non-oriented silicon steels, which were insulation-coates with various kinds of inorganic and inorganic-organic complex coating solutions. In addition, how the carbon contained in the insulation layer would affect the carbon content and the magnetic properties of the steel substrates is examined. Lower temperature heat treftment ($480^{\circ}C$ for 0.5hr) is found to render morw favorable surface qualities, wheras higher temperature heat treatment ($790^{\circ}C$ for 2hr) better core loss due to grin growt occurred during the heat treatment. Decarburization of the steel substrate is also found unaffectrd by the presence of carbon in the insulation layer.

• Proceedings of The Korean Society of Agricultural and Forest Meteorology Conference
• /
• 2001.06a
• /
• pp.151-152
• /
• 2001

A common problem of the model simulations of the land surface - atmosphere interaction is to choose the appropriate spatial scale and resolution at which the simulations are to be performed. The accuracy of energy and water exchange predictions between the land surface and the atmosphere in regional and global scale atmospheric models is mainly influenced by: model simplifications applied to describe the spatial heterogeneity of land surface properties within individual grid cells; ignoring the variability of sub-grid properties (e.g. relief, vegetation, soils), and; lacks of necessary input meteorological and biophysical data.(omitted)

• Proceedings of the Optical Society of Korea Conference
• /
• 1995.06a
• /
• pp.43-52
• /
• 1995

For massicely parallel optical interconnections, we propose three types of planar optical configurations for crossover photonic switching netweek, backboard optical signal distribution, and high speed packet address detection. The planar overalsy allow 2-D pixel arrays located on a wafer scale intergated circuit to be interconnected in a compact and vibrationally robust configuration. By the laser writing technique surface relief of microopical Fresnel lenses and multiplex gratigs used in the planar optics are successfully fabricated.

• Journal of Magnetics
• /
• v.14 no.3
• /
• pp.108-113
• /
• 2009

High-coercive garnet films have certain parameters suitable for creating reconfigurable magnetic atomic chips with visible geometry. However, the inner stresses and morphological properties, namely, networks of dislocations, layering and surface relief, and dependence of coercivity on thickness must be taken into account. Select features of films important for atomic trap creation have been studied experimentally and the supposed traps concept provided.

• Journal of the Korean Geographical Society
• /
• v.44 no.1
• /
• pp.31-55
• /
• 2009

This research aims 1) to characterize the spatial distribution of low relief landforms (plains) via analyses of a Digital Elevation Model (DEM), 2) to classify plains according to morphological and genetic similarity, and 3) to develop a model to explain forming processes of plains in the Korean peninsula. Plains can easily be separated from high relief mountaneous areas by analyzing the DEM. The overall morphological and locational characteristics of plains can be categorized into lava plains, fluvial-marine plains, erosional plains, intermontane basins, and higher ground plains. It is concluded that the characteristic of each plain type is decided by base-level changes caused by tectonic uplift and sea-level changes, and topological relationship of different rock types. Different plain types do not exist independently, but connected with each others along stream networks. The model developed is able to combine the morphological characteristics of plains with the channel network to conceptualize characteristics and development pathways of plains in the Korean Peninsula.

• The Journal of Korean Academy of Prosthodontics
• /
• v.23 no.1
• /
• pp.83-95
• /
• 1985

The purpose of this study was to evaluate microstructures on the etched surface of 11 base metal alloys for dental restorations and to observe the relationship between the etching pattern and beryllium. For this purpose, the following experiments were done; 11 base metal alloys were etched in (1) 10% $H_2SO_4$, (2) 10% $H_2SO_4$, 9 parts+methanol 1 part (3) Conc. $HNO_3$ 25%+glacial acetic acid 25%+$H_2O$ 50% (4) Conc. $HNO_3$ 5% (5) 2% glacial acetic acid added to Conc. $HNO_3$ 1% solution, with their etching conditions varied. Etched surface of alloys were examined under the scanning electron microscope. Results were as follows; 1. Almost all of Ni-Cr-Be alloys showed gooed etchd surface in $H_2SO_4$, solution, while some of those alloys which contains no beryllium showed good etched surface in $HNO_3$ solution. 2. Main components of etching solution can vary etching pattern of alloys. 3. Gamma prime phase relief, which can be found in all Ni-Cr-Be alloys, can't be found in any alloy that contains no beryllium.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.16 no.1
• /
• pp.47-63
• /
• 1990

Image analyser was used to understand the condition of skin surface and to evaluate the efficacy of cosmetic treatment. It was unsatisfactory to analyse skin surface structure although several methods using image analyser had been presented. We developed the new system composed of image analyser and Tandem Scanning Reflected Light Microscope (TSRLM) having the remarkable optical sectioning property as image input device. By using this new system, we quantitatively measured the change of skin surface, the depth and width of furrow in micron unit, resulted by cosmetic treatments. And also three dimensional image of skin was reconstructed with serial sectioned images, which were captured through TSRLM, for better understanding of the effect of cosmetic treatment. It was found that skin relief was more easily understood and the change of skin surface caused by cosmetic treatment was more accurately measured by using this system. In addition, we was also aware of the possibility of in vivo direct measurement of skin furrow without replica. It was conceivable that our system could be applicable for study of cosmetic effects further.

• Journal of the Korean Society of Industry Convergence
• /
• v.1 no.2
• /
• pp.65-74
• /
• 1998

The purpose of this paper is to investigate the mount of relief of human solar heat load and thermal comfort in outdoor environment in summer, Six different types of sites, T garden and its neighboring area in Japan, were selected as the experiment sites. The experiments were conducted from 22 to 29 August, 1994 to find the relationship between climatic conditions and human responses, Climatic conditions, subjects's thermal sensation and skin temperature were measured. Radiant heat exchange on the human body was estimated on the basis of the measured air and surface temperature and solar radiation. Thermal index Operative Temperature and New Effective Temperature was modified with the effect of the radiant heat exchange. Human thermal comfort and skin temperature is affected by the solar radiation and the sky factor in an outdoor environment. The effect of tree shade was verified on thermal comfort, The mount of relief of human solar heat load is relation to the existence of shade a solar radiation and the sky factor. The urban garden is one of the effective design element in an urban environmental planning.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.10a
• /
• pp.393-398
• /
• 2001

The technique of high speed machining is widely studied in machining fields, because the high efficiency and accuracy in machining can be obtained in high speed machining. Unfortunately the development of tool for high speed machining in not close behind that of machine tool. In this study, several types flat endmill is prepared for obtaining data according to tool shape. Especially, we concentrated in helix angle, number of cutting edge, rake angle and relief angle. Machinability is measured by cutting force, tool life, tool wear, chip shape and surface roughness according to cutting length. 3-axis cutting forces are acquired from the invented tool dynamometer for high speed machining. Particularly, we found out that the axial cutting force waveform has a good relation with tool wear features. By above results, it is suggested the endmill tool with $45^{\circ}$ helix angle, 6 cutting edge, $-15^{\circ}$ rake angle and $12^{\circ}$ relief angle be suitable for high speed machining

• International Journal of Precision Engineering and Manufacturing
• /
• v.2 no.4
• /
• pp.5-11
• /
• 2001

Vibration and noise of gears is doc to the transmission error and the vibration exciting force caused by the periodically alternating tooth stiffness. Transmission error is the rotation delay between driving and driven gear caused by manufacturing error, alignment error in assembly and so on. Tooth stiffness changes with the proceeding mesh of teeth. The purpose of this study is to develop how to calculate simultaneously the optimum amounts of tooth profile modification. end relief and crowning by minimizing the vibration exciting force of helical gears. We estimate the vibration exciting force by the meshing analysis of gears. Formulated constraints of this problem consist of contact ratio and strengths of gear teeth such as tooth bending strength, surface durability, and scoring. ADS(Automated Design Synthesis) is used as an optimization tool. We also investigate the relation between the aspect ratio and the optimum values of tooth modification. The proposed method can calculate the optimum amount of tooth modification automatically and is expected to be practically useful to resolve the problem of vibration of helical gears.