• Journal of Korean Neuropsychiatric Association
• /
• v.57 no.2
• /
• pp.119-132
• /
• 2018

Despite the fact that pharmacotherapy depressive disorders have proven efficacy, a substantial number of patients are resistant to conventional management. As neuroscientific research about pathophysiology of depression have accumulated, repeated transcranial magnetic stimulation (rTMS) and transcranial direct current stimulation (tDCS) have emerged as an important mechanism-based treatment modality. This overview provides a review of therapeutic application of rTMS and tDCS in patients with depression. The clinical and basic studies of rTMS and tDCS in depression were reviewed and integrated using a literature review and interview with experts. rTMS is a noninvasive procedure of a localized pulsed magnetic field to the surface of the head to cause a depolarization of neurons in the brain cortex. tDCS has a mechanism of modulating cortical excitability in a polarity-specific manner without eliciting action potentials. rTMS and tDCS seem promising for treating depression. Although therapeutic parameters and further technical improvement remain to be systematically investigated, rTMS and tDCS would be a safe and effective intervention to treat depression.

• Journal of Adhesion and Interface
• /
• v.25 no.2
• /
• pp.63-68
• /
• 2024

In this study, the contamination of gold(Au) wire according to the types of rinse applied for surface treatment in the wire bonding process is investigated and confirmed. For the surface treatment, rinses containing silicon(Si) or those based on organic materials are mainly employed. To identify their effects, surface treatment is conducted on Au wire using two types of rinse at a 1.0 wt% concentration, referred to as Si-including and Oil-based rinse-coated Au wire. Subsequently, a simulation experiment is performed to verify the reactivity of dust containing Si components that could occur in the semiconductor process. Through optical microscopy (OM) and scanning electron microscopy(SEM) analysis, it is observed that a larger amount of dust is adsorbed on the surface of Si-including rinse-coated Au wire compared with the Oil-based rinse-coated Au wire. This is attributed that the rinse containing Si components is relatively polar, causing polar interactions with dust, which also has polarity. Therefore, it is expected that using a rinse without Si components can reduce contamination caused by dust, thereby decreasing the defect rate in the practical wire bonding process.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.1
• /
• pp.42-48
• /
• 2017

Characteristics of ground-penetrating radar(GPR) signals for detecting buried pipes are investigated numerically. Transmitting and receiving parts of a GPR system, a subsurface soil and a plastic pipe filled with a dielectric material are modeled by using the finite-difference time-domain(FDTD) method. FDTD simulations for observing aspects of GPR signals are performed as a function of the diameter of the pipe and the permittivity of the filling material in the pipe. GPR signals scattered by a dielectric filled pipe appear as a superposition of two waves, such as the specular wave from the front convex surface of the pipe and the axial wave from the rear concave surface of the pipe. We show that the amplitude, the polarity, the delay time of two waves depend on the size of the pipe and the permittivity of the filling material in the pipe.

• Journal of Korean Elementary Science Education
• /
• v.33 no.2
• /
• pp.401-414
• /
• 2014

The purpose of this study is to investigate the elementary preservice teachers' conceptions about 'plastics' focusing on non-polar property from a National University of Education. For the study, the views about plastics, relative shapes of a water droplet on plastic or glass material, and relative shapes of water surface in the plastic or glass measuring cylinder were surveyed from the preservice teachers. And the responses were analyzed based on the patterns. The results from the study are as follows: First, most preservice teachers were well aware of the plastic products which are used in daily life. Second, the responses concerning the reason why plastics can be used commonly were divided into 2 categories with 14 sub-level groups. However relatively few preservice teachers mentioned regarding 'chemical stability' and 'conductivity', which are associated with the plastics' non-polar property. Third, it was found that 50 participants (30.1%) had 'Scientific conception (Sc)', 38 (22.9%) had 'Partial-scientific conception (Ps)', 66 (39.8%) had 'Misconception (Mc)', and 12 (7.2%) had 'No conception (Nc)' on the subject of the relative shapes of a water droplet. Fourth, the distribution patterns and the ratio of the preservice teachers' conception on the survey question 3 concerning the relative shapes of water surface were quite similar to those of the survey question 2. So it was concluded that overall understanding level of the preservice teachers was pretty low on the subjects of the relative polarities of the plastic, glass, and water as well as their interactions. Fifth, the distribution percentile of 'Sc'/'Ps'/'Mc'/'Nc' was not related with the gender but highly correlated with preservice teachers' academic field and their science subjects taken in high school. Based on the results from the study, some educational guidelines were suggested.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 1999.04b
• /
• pp.309-314
• /
• 1999

With a view to seek the influence of hollow sphere pigments of latex upon the printed color on coated paper surface, the hollow sphere pigments were compared with filled ones in a variety of experimental approaches. Colloidal properties of latices were determined by measuring zeta potential and particle size distribution. For the amphoteric filled sphere pigment of latex, the polarity was reversed from the negative side to the positive side with decreasing pH. An extraordinarily high peak in the particle size distribution of the amphoteric filled evidenced aggregation between latex particles near the isoelectric point, depending on the electrolyte concentration and pH of the suspending medium. Coated papers containing the hollow sphere pigment in their coating improved optical properties like gloss and brightness. Optical parameters solely of the coating could account for this finding. An equation derived from the Kubelka-Munk equation calculated them fro twice measurements of reflectance of a coated paper over two substrates of different reflectances. This method permitted to predict brightness of coated paper of which coat weight would be different fro the actual one. The colorimetric parameters of solid-printed surfaces of the coated papers closely related to optical and structural properties of the coated papers. The color of the printed surfaces was dominated by the brightness and the smoothness of the coated papers. The hollow sphere pigments were proved to improve optical properties of coated paper and to control minutely colorimetric parameters of printed surfaces.

• Economic and Environmental Geology
• /
• v.23 no.4
• /
• pp.393-409
• /
• 1990

Synthetic seismograms and deduced characteristic properties of the non-geometrical $S^*$ and $P^*$ waves are presented. These waves are excited on the free surface or an interface between two different media by an inhomogeneous P wave from a point source nearby, and propagate as homogeneous waves in the media. Synthetic seismograms are computed using an extended reflectivity method designed for buried source and receiver. An efficient computational procedure for propagator matrices of layers is devised to reduce the computational time and the RAM memory size in the implementation of the reflectivity method. Radiation patterns are obtained from the particle motions of the four types of the "*" waves, i.e., the $S^*$ wave generated near the free surface, and the reflected $S^*$, transmitted $S^*$ and transmitted $P^*$ waves generated near an interface. Some patterns show polarity changes of displacements and others reveal monotonic or non-monotonic variation of amplitude depending on the velocity structure. The decaying trend of amplitude with increasing epicentral distance are also shown for the head wave type of the "*" waves.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.2
• /
• pp.438-444
• /
• 2008

A self-assembled monolayer of 2,2'-bipyridine (22BPY) molecules on Au(111) underwent a structural phase transition when the polarity of a bias voltage was switched in scanning tunneling microscopy (STM) experiments. The nature of two bright spots representing each 22BPY molecule on Au(111) in the high-resolution STM images was identified by calculating the partial density plots for a monolayer of 22BPY molecules adsorbed on Au(111) using tight-binding electronic structure calculations. The stacking pattern of the chains of 22BPY molecules on Au(111) was explained by examining the intermolecular interactions between the 22BPY molecules based on first principles electronic structure calculations for a 22BPY dimer, (22BPY)2. The structural instability of the 22BPY molecule arrangement caused by a change in the bias voltage switch was investigated by estimating the adsorbate-surface interaction energy using a point-charge approximation for Au(111).

• KIPS Transactions on Software and Data Engineering
• /
• v.8 no.10
• /
• pp.421-426
• /
• 2019

In this paper, we propose a method to visualize the geometric features of the contact region between proteins in a protein complex. When proteins or ligands are represented as curved surfaces with irregularities, the property that the two surfaces contact each other without intersections is called shape compatibility. Protein-Protein or Protein-Ligand docking researches have shown that shape complementarity, chemical properties, and entropy play an important role in finding contact regions. Usually, after finding a region with high shape complementarity, we can predict the contact region by using residual polarity and hydrophobicity of amino acids belonging to this region. In the research for predicting the contact region, it is necessary to investigate the geometrical features of the contact region in known protein complexes. For this purpose, it is essential to visualize the geometric features of the molecular surface. In this paper, we propose a method to find the contact region, and visualize the geometric features of it as normal vectors and mean curvatures of the protein complex.

• Journal of Life Science
• /
• v.21 no.10
• /
• pp.1401-1406
• /
• 2011

Morphological changes in immune cells occur due to pathogen infection and natural circulation. T cells produce uropod, filopodia, lamellipodia, and microvilli for inflammation, immunosurvelliance, migration, and diapedesis. Short finger-like microvilli cover the surfaces of circulating mammalian immune cells. The surface features of monocytes and neutrophils are quite different, containing membrane ruffles as their predominant structure. In this study, we present the involvement of actin cytoskeleton regarding T lymphocyte microvilli. From analysis of scanning electron micrographs, Jurkat T lymphocyte microvilli was observed to rapidly disassemble when exposed to the actin-sequestering molecule, cytochalasin D. In contrast to cytochalasin D treatment, we found that median microvillar thickness was enlarged on Jurkat T lymphocytes treated with PMA via Lin-11, Isl-1, Mec-3 Kinase (LIMK) and cofilin signaling. In addition, actin cytoskeleton was involved in polarity formation in EL4 T lymphocytes. These results suggest that microvilli formation or polarity of T lymphocytes are involved in actin cytoskeleton dynamics.

• Geophysics and Geophysical Exploration
• /
• v.5 no.3
• /
• pp.199-205
• /
• 2002

In the resistivity method, the potential difference between two grounded electrodes is measured and this can be positive or negative. The apparent resistivity and the potential difference have the same polarity. Since the electric field is the gradient of the potential, the polarity of the potential difference depends on the direction of the electric field. If the direction of the vector connecting two grounded electrodes is the same to that of the electric field, the measured potential difference and the apparent resistivity become positive. If the opposite is the case, they become negative. In general, the primary electric field and the vector connecting two potential electrodes have the same direction in a surface resistivity method. In this case, the measured potential difference is always positive because the primary electric field is greater than the secondary field. Therefore, the apparent resistivity is always positive if noise is free and topography is flat. The secondary field component, however, can be greater than the primary field component along the vector connecting two potential electrodes in the cross-hole resistivity method. Furthermore, if the secondary electric field and the vector connecting two potential electrodes have an opposite direction, the apparent resistivity become negative. Consequently, the apparent resistivity may be negative in the region where the primary electric field component along the vector connecting two potential electrodes is very small.