• 한국농공학회지
• /
• 제34권1호
• /
• pp.66-77
• /
• 1992

A prototype probabilistic approach to thickness design for asphalt pavement surface course was developed using first-order second moment probability model. The tensile strain (load effect) developing at the bottom of surface layer due to the wheel load and the critical strain (resistance) of asphalt concrete were used as random variables for pavement reliability analysis. Based on the parameters for load effect and resistance data collected from reference and field, simulated data were generated by Monte Carlo method for reliability evaluation of the pavement for a typical rural highway. Thickness of pavement surface course was defined in terms of target reliability of the pavement, growth factor of traffic, design life of pavement and resistance of the asphalt concrete to be placed on the pavement. According to these rationales, prototype thickness design chrats were sugested through example studies. From these, similar design charts can be developed for many pavements if appropriate data and target reliability are determined.

• 한국도로학회논문집
• /
• 제16권1호
• /
• pp.31-39
• /
• 2014

PURPOSES : Surface treatment material for pavement preventive maintenance should be inspected field applicability. This study(Part II) aimed to checkup coating characteristics and performance analysis using lab and field tests. The hydrophobic - low viscosity filling material for pavement preventive maintenance is presented in Part I, which is a series of companion study. METHODS : Relative comparison between general asphalt mixtures and surface treatment asphalt mixtures are analyzed and measured for the field application such as indirect tensile strength ratio(TSR), abrasion resistance, crack propagation resistance, temperature resistance, coating thickness, permeability resistance and skid resistance in terms of british pendulum number(BPN). RESULTS : It is found that TSR, crack propagation resistance and permeability resistance is increased as against uncoated asphalt specimen. Abrasion resistance and temperature resistance is secured from the initial coating thickness point of view, which is about 0.2~0.3mm. Skid resistance on the surface treatment pavement is satisfied with the BPN criteria of national highway because of exposed aggregate and crack sill induced pavement deterioration and damage cracks. CONCLUSIONS : The hydrophobic - low viscosity surface treatment material for pavement preventive maintenance is validated on field applicability evaluation based on quantitative analysis of coating thickness and performance analysis using lab and field tests.

• 한국도로학회논문집
• /
• 제19권5호
• /
• pp.43-48
• /
• 2017

PURPOSES : The purpose of this study is to verify the effects of fiber grid reinforcement on the thickness reduction of asphalt pavement. Test sections were constructed on the national highway to evaluate the structural capacity of asphalt pavement with the reinforced fiber grid and normal asphalt pavement. METHODS : Falling Weight Deflectometer (FWD) tests were performed to measure the structural capacity of test sections. The loads of the FWD test are 4.1 ton, 8.0 ton, 10.0 ton, and loaded twice, respectively. The test sections consist of a reference asphalt pavement section, an asphalt pavement section reduced with a 5-cm base layer thickness, and a fiber grid reinforced asphalt pavement section reduced with a 5-cm base layer thickness. In addition, strain data was collected using strain gauges installed in the test sections. RESULTS : The results of the FWD tests showed that the deflections of the pavement section reinforced with the fiber grid was reduced by about 14% compared with that of the reference asphalt pavement section. The strain at the bottom of the asphalt surface layer of the pavement section reduced to a 5-cm base thickness and reinforced with a fiber grid was similar to that at the bottom of the asphalt layer of the reference asphalt pavement. CONCLUSIONS : The results of the FWD and strain tests showed the possibility of the pavement thickness reduction by reinforcement with a fiber grid.

• 한국도로학회논문집
• /
• 제7권2호
• /
• pp.23-31
• /
• 2005

본 연구는 장수명 아스팔트 포장 공법개발 연구의 일환으로 포장수명을 40년이상 지속시킬 수 있는 단면설계를 수행하였다. 본 연구의 목적은 포장체의 장수명화를 위하여 효과적이고 간편하게 포장체의 각층 단면두께 및 탄성계수를 결정하는 절차를 제시함에 있다. 포장체의 유한요소 해석을 통하여 장수명 아스팔트포장의 가상데이터베이스를 구축하였다. 이 가상데이터베이스는 포장체 각 층의 두께, 탄성계수 및 포장체 내의 처짐, 응력 및 변형률을 포함하고있다. 구축된 데이터베이스를 이용하여 포장의 장수명에 필요한 한계변형률을 만족하는 포장의 단면을 제시하였다. 연구결과, 총 아스팔트층의 두께가 410mm보다 큰 경우에는 포장층의 각층의 두께나 재료의 특성과 관계없이 항상 장수명 아스팔트 포장으로 간주할 수 있으나, 250mm보다 작을 경우에는 장수명 아스팔트 포장에서 제외되었다. 총 아스팔트층의 두께가 250mm보다 크고 410mm보다 작은 경우에는 장수명 아스팔트 포장 조건에 만족하기 위한 포장층 두께와 탄성계수값을 결정할 수 있는 절차를 제시하였다.

• 한국산학기술학회논문지
• /
• 제18권4호
• /
• pp.487-493
• /
• 2017

본 연구의 목적은 한국형포장설계법 프로그램을 이용하여 아스팔트포장에 발생하는 주요 파손 유형인 평탄성(IRI, International Roughness Index), 피로균열, 소성변형 등에 영향을 주는 요소를 평가하는 것이다. 평가에 사용된 설계입력변수로는 지역구분(서울과 부산), 교통량조건, 아스팔트 바인더, 표층용 골재의 최대치수, 아스팔트 표층 두께, 아스팔트 기층의 두께 등을 적용하였다. 해석조건은 위의 변수를 조합하여 총 64개의 case study를 수행하여, 이들 결과를 상호 비교 평가하여 아스팔트 포장의 파손에 영향을 주는 변수의 중요도를 평가하였다. 기본조건에서 1개의 변수에 의한 영향 고려시, 서울지역 5000대/일 교통량의 경우 아스팔트 바인더(C)의 영향이 다른 요소에 비해 상대적으로 크게 나타났고, 나머지 요소 중에서는 기층두께(A), 표층두께(B), 골재입도두께(D) 순으로 결과를 나타내었다. 10,000대/일 교통량의 경우도 마찬가지로 똑같은 결과 값이 나타났다. 부산지역 5000대/일 교통량의 경우 서울지역과 마찬가지로 아스팔트 바인더(C)의 영향이 다른 요소에 비해 상대적으로 크게 나타났고, 나머지 요소중에는 서울지역과 다르게 기층두께(A), 골재입도두께(D), 표층두께(B) 순으로 결과를 나타내었다. 교통량 조건과 지역에 따라 다소 차이는 있었지만, 아스팔트 포장 파손에 가장 큰 영향을 주는 요소는 아스팔트 바인더이고, 2가지 조합의 경우 아스팔트 바인더와 기층의 두께 등으로 평가되었다.

• 한국도로학회논문집
• /
• 제18권1호
• /
• pp.85-90
• /
• 2016

PURPOSES : The objective of this paper is to understand the deterioration phenomenon and causes in the pavement of a ramp area. METHODS : Ramp areas need to be sloped because of the centrifugal force, which depends on the vehicle speed and grade of the ramp area. As a result, vertical and horizontal forces are applied on the pavement surface of the ramp area. Furthermore, the horizontal force depends on the vehicle speed and grade of the ramp area. In order to analyze the pavement structure of a ramp area, a multi-layered elastic analysis program was used to evaluate the weakest link of fatigue cracking deterioration, according to the simultaneously applied vertical and horizontal forces. RESULTS : From case studies related to the bonding conditions between the surface and base layer in a ramp area, it was found that the partially bonded cases resulted in a critical potential of fatigue cracking deterioration, in a comparison of 50%, 70%, and fully bonded cases. CONCLUSIONS : According to the results of the case studies, the pavement structure system should be reinforced by upgrading the material or increasing the thickness compared to the general pavement areas, in order to provide a performance life similar to the mainline pavements in the ramp areas.

• 한국지반신소재학회논문집
• /
• 제18권4호
• /
• pp.287-297
• /
• 2019

본 연구에서는 공동 발생 지반에 대한 안정성 분석을 목적으로 포장층 두께와 교통하중 크기를 고려한 일련의 유한요소 수치해석을 수행하였다. 본 수치해석 방법의 타당성 검증을 위해 선행된 수치해석 연구를 활용하여 공동 발생 지반의 역학적 거동을 모사하였으며, 기존의 현장계측 결과와 비교·분석하였다. 또한, 수치해석 결과로부터 지반의 간극비, 지표침하, 전단응력의 변화를 확인함으로써 전반적인 지반의 역학 거동을 확인할 수 있었으며, 본 연구에서 산정한 응력비 및 비파괴심도와 지표침하량의 관계를 이용하여 공동 발생 지반의 안전성을 분석하였다. 그 결과, 포장층 두께가 감소하고 교통하중 크기가 증가할수록 지표침하량의 증가와 함께 비파괴심도 및 지반의 전반적인 안정성은 감소함을 알 수 있었다.

• 한국도로학회논문집
• /
• 제6권4호
• /
• pp.55-63
• /
• 2004

효율적인 포장의 관리를 위해서 포장상태를 객관적으로 평가하는 포장평가지수의 사용은 필수적이다. 현재 사용되고 있는 PSI, MCI, UPCI는 사용자나 관리자의 입장만을 각각 고려하여 종합적인 포장평가지수의 역할을 못하고 있는 실정이다. 따라서 본 논문에서는 기존 평가지수들의 문제점을 파악하고 이를 개선한 새로운 포장평가지수를 개발하였다. 또한 개발된 평가지수로 실제 포장자료를 이용하여 포장재료의 성질에 따른 지수의 민감도 분석을 실시하였다. 표층두께, 아스팔트점도, 아스팔트함량의 순서로 포장평가지수에 영향을 주었다.

• 한국도로학회논문집
• /
• 제18권6호
• /
• pp.131-136
• /
• 2016

OBJECTIVES : The objective of this research is to determine the integrity of pavement structures for areas where voids exist. Furthermore, we conducted the study of voided-area analysis and remaining life prediction for pavement structures using finite element method. METHODS : To determine the remaining life of the existing voided areas under asphalt concrete pavements, field and falling weight deflectometer (FWD) tests were conducted. Comparison methods were used to have better accuracy in the finite element method (FEM) analysis compared to the measured surface displacements due to the loaded trucks. In addition, the modeled FEM used in this study was compared with well-known software programs. RESULTS : The results show that a good agreement on the analyzed and measured displacements can be obtained through comparisons of the surface displacement due to loaded trucks. Furthermore, the modeled FEM program was compared with the available pavement-structure software programs, resulting in the same values of tensile strains in terms of the thickness of asphalt concrete layers. CONCLUSIONS : The study, which is related to voided-area analysis and remaining life prediction using FEM for pavement structures, was successfully conducted based on the comparison between our methods and the sinkhole grade used in Japan.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1996년도 봄 학술발표회 논문집
• /
• pp.388-393
• /
• 1996

This study evaluated characteristics and performance of recycled concrete as a pavement which was constructed on a low volume road. The recycled concrete was prepared by replacing a half of coarse aggregate with recycled aggregate. Natural sand from a source was used as fine aggregate together with admixtures such as plasticizer and fly ash (0.8% and 5% by wt. of cement, respectively). The length, thickness and width of the pavement were 100mm, 20cm and 3m, respectively. From construction experience, it was found that workability and finishability of the recycled concrete mixture were relatively poor, but strengths were satisfactory. Flexural strength, compressive strength and elastic modulus at 28 days were approximately 45Kg/$\textrm{cm}^2$, 250Kg/$\textrm{cm}^2$, and 240,000 Kg/$\textrm{cm}^2$, respectively. The pavement could be constructed by hand without much difficulty. The surface was finished smoothy by wet fabric and only minor cracks were found on the surface.