• Journal of the Korean Vacuum Society
• /
• v.15 no.2
• /
• pp.168-172
• /
• 2006

GaN nucleation layers were grown by hydride vapor phase epitaxy (HVPE) and the effect of growth temperature on the structural properties of GaN nucleation layers for nanorods was investigated by synchrotron x-ray scattering and Atomic Force Microscopy (AFM). For the samples grown at different temperatures, two-component rocking profiles of (002) GaN Bragg peaks for the GaN nucleation layers were observed with one very sharp and the other broad. It was shown that the two-component rocking profile could be qualitatively explained by surface morphology, which was in good agreement with AFM result, from which we could conclude that relatively low temperature is favorable for GaN nanorods formation.

• Applied Chemistry for Engineering
• /
• v.9 no.7
• /
• pp.974-978
• /
• 1998

The kinetics of crystal growth and nucleation in dependence on the supersaturation of an aqueous solution of 3-nitro-1,2,4-triazol-5-one(NTO) were evaluated on the draft tube-baffle(DTB) crystallizer operated batchwise. The crystal growth rate is proportional to the supersaturation to the 2.9 power, and the nucleation rate to the 4.2 power. The uncleation behavior for NTO-water system in DTB crystallizer was grasped according to Mersmann's criteria. The nucleation in this crystallizer was found to act with heterogeneous nucleation and surface uncleation simultaneously. Simplified relation was derived for calculation of mean crystal size of product crystals from the batch cooling crystallizer. The obtained relation was verified by a set of experiments.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2001.06a
• /
• pp.14-14
• /
• 2001

Nitride films such as TiN, CrN etc. deposited on glass by PVD processes have been developed for many industrial applications. These nitride films deposited on glass were widely used for not only decorative and optical coatings but also wear and corrosion resistance coatings employed as dies and molds made of glass for the example of lens forming molds. However, the major problem of nitride coatings on glass by PVD process is non-uniform film owing to pin-hole and micro crack. It is estimated that nonuniform coating is influenced by a different surface energy between metal nitrides and glass due to binding states. In this work, therefore, for the evaluation of nucleation and growth mechanism of nitride films on glass TiN and CrN film were synthesized on glass with various nitrogen partial pressure by unbalanced magnetron sputtering. Prior to deposition, for the examination of relationship between surface energy and film microstructure plasma pre-treatment process was carried out with various argon to hydrogen flow rate and substrate bias voltage, duty cycle and frequency by using pulsed DC power supply. Surface energy owing to the different plasma pre-treatment was calculated by the measurement of wetting angle and surface conditions of glass were investigated by X-ray Photoelectron Spectroscopy(XPS) and Atomic Force Microscope(AFM). The microstructure change of nitride films on glass with increase of film thickness were analyzed by X-Ray Diffraction(XRD) and Scanning Electron Microscopy(SEM).

• Korean Journal of Materials Research
• /
• v.30 no.4
• /
• pp.160-168
• /
• 2020

The current density in copper electroplating is directly related with the productivity; then, to increase the productivity, an increase in current density is required. This study is based on an analysis of changes in surface characteristics and mechanical properties by applying the addition of Alcian Blue (AB, C₅₆H₆₈Cl₄CuN₁₆S₄). The amount of Alcian Blue in the electrolytes is changed from 0 to 100 ppm. When Alcian Blue is added at 20 ppm, a seed layer is formed homogeneously on the surface at the initial stage of nucleation. However, crystals electroplated in electrolytes with more than 40 ppm of Alcian Blue are observed to have growth in the vertical direction on the surface and the shapes are like pyramids. This tendency of initial nucleation formation causes protrusions when the thickness of copper foil is 12 ㎛. Thereafter, a lot of extrusions are observed on the group of 100 ppm Alcian Blue. Tensile strength of groups with added Alcian Blue increased by more than 140% compare to no-addition group, but elongation is reduced. These results are due to the decrease of crystal size and changes of prior crystal growth plane from (111) and (200) to (220) due to Alcian Blue.

• Journal of the Korean institute of surface engineering
• /
• v.53 no.3
• /
• pp.109-115
• /
• 2020

In this study, polycrystalline diamond was synthesized by chemical vapor deposition (CVD). Diamond films were deposited on a-plane sapphire substrates while changing the concentration of methane for hydrogen (CH₄/H₂), and the concentrations of methane were 0.25, 0.5, 1, 2, 3 and 4 vol%, respectively. Crystallinity and nucleation density according to changes in methane concentration were investigated. At this time, the discharge power, vacuum pressure, and deposition time were kept constant. In order to deposit polycrystalline diamond, the sapphire substrate was etched with sulfuric acid and hydrogen peroxide (ratio 3:7), and the sapphire surface was polished for 30 minutes with 100 nm-sized nanodiamond particles. The deposited diamond thin film was analyzed by a scanning electron microscope (SEM), a Raman spectra, Atomic force microscope (AFM) and an X-ray diffractometer (XRD). By controlling the ratio of methane to hydrogen and performing appropriate pre-treatment conditions, a polycrystalline diamond thin film having excellent crystallinity and nucleation density was obtained.

• Journal of the Korean institute of surface engineering
• /
• v.39 no.2
• /
• pp.82-86
• /
• 2006

Diamond films were deposited on 10.0$\times$10.0$mm^2$ pretreated (100) Si substrate using $CH_4$, $H_2$ and $O_2$ source gases in a horizontal-type microwave plasma enhanced chemical vapor deposition system. We introduced a cyclic on/off modulation of $CH_4$ and/or $O_2$ flows is a function of the reaction time during the initial deposition stage. Surface morphology and diamond quality of the films were investigated as a function of the different cyclic modulation process of the source gases flows: For the enhancement of the nucleation density, there is an optimal process for the incorporation of oxygen. Diamond qualities of the films were improved by introducing oxygen gas during the initial deposition stage.

• Journal of Energy Engineering
• /
• v.26 no.2
• /
• pp.73-79
• /
• 2017

In nucleation assisted crystallization process formed $CO_2$ leaves as colloid gas and is used as the template by the rapidly growing crystals in the nucleation site. This emulsion of $CaCO_3$ micro-crystals & $CO_2$ micro-bubbles forms hollow particles. Formed hollow particles are double walled, both internal and external faces belonging to the cleavage aragonites which separate the surrounding water from the enclosed gas cavity. Hence, the reverse reaction of $CO_2$ with water forming Carbonic Acid is not possible and the pH stability is maintained. In fact every excess $CaCO_3$ crystals are buffering any carbonic acid left over. This $CO_2$ based nucleation technology prevents scale formation in water channels, but it also helps to reduce the previously formed scales. This process takes out water dissolved $CO_2$ in almost-visible micro-bubbles forms that helps reducing previously formed scale over a period of time (depends on the usage period). The aragonite crystals can't form scale because of its stable molecular structure and neutral surface electro potentiality.

• Applied Chemistry for Engineering
• /
• v.8 no.1
• /
• pp.84-91
• /
• 1997

Diamond film was deposited on Mo substrate at atmospheric pressure using a combustion flame apparatus with the addition of $H_2$. With the substrate temperature, the nucleation density of the substrate was increased. At temperatures above $1000^{\circ}C$, some of diamond was partly converted into graphite and etched by hydrogen atoms. With an increase of the $C_2H_2/O_2$ ratio, the nucleation density was increased. But crystals were cauliflower-shaped and a large number of amorphous carbon were deposited. With the addition of $H_2$, the nucleation density of diamond was increased by the improvement of surface activity. Diamond film of high crystallinity was deposited by etching amorphous carbon. With an increase of deposition time, the thickness of diamond film was increased.

• ETRI Journal
• /
• v.18 no.4
• /
• pp.339-346
• /
• 1997

Good quality a-axis oriented thin films of $YBa_2Cu_3O_{7-x}$ may be grown by the use of a $PrBa_2Cu_3O_{7-x}$ (PBCO) layer as a template. Here we present a detailed study of the nucleation of the PBCO layer, explaining the orientations observed. It is determined that the wavy surface of a $LaSrGaO_4$ (LSGO) (100) substrate consists of the {101} planes by observing cross-sectional transmission electron microscopy images of the interface between the PBCO film and the substrate. The images and selected area diffraction patterns show that a mixed c-and b-axis oriented PBCO layer was initially grown on the substrate, followed by pure b-axis oriented PBCO growth. We explain that the c-axis oriented growth is the result of the growth of the PBCO (019) planes on the LSGO (101) planes. We conclude that the nucleation and growth of the PBCO films at the initial stages depends on the crystallographic plane of the substrate surfaces, however, as the film grows further, the kinetics of the deposition process favors b-axis oriented growth.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.1
• /
• pp.120-125
• /
• 2010

For application of transparent bulletproof materials, the SLS(soda-lime-silicate) glass was heated by 2-step crystallization. The DTA curve for SLS glass revealed the nucleation and crystal growth temperature at about $575^{\circ}C$ and $675^{\circ}C$, respectively. The crystallized glass was heated at various conditions(temperature, time). As a result, the maximum nucleation and crystal growth rates were $3.8\times10^5/mm^3{\cdot}hr$ at $575^{\circ}C$ and 20.58nm/min at $680^{\circ}C$, respectively. The bending strength, fracture toughness and vickers hardness were 451.7MPa, $0.9388MPa{\cdot}m^{1/2}$, and $693.9H_v$ which were 201%, 31%, and 22% higher than parent glass, respectively. Surface image and transmittance of crystallized SLS glass were analyzed by optical microscopy and UV/VIS/NIR spectrophotometer. Transmittance of crystallized SLS glass at visible-range(200~800nm) was not changed.