• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2008.05a
• /
• pp.47-70
• /
• 2008

Cost efficiency is today the primary requirement in the paper and board industry. This has led therefore, to a greater preponderance of products with specifically designed functionality to take account of current industry needs. Continually increasing machine coating speeds together with these new coating colour components have put more emphasis on the importance of the correct rheology and water retention of the coating colours to achieve good runnability and end product quality. In the coating process, some penetration of the aqueous phase, to the base paper or board must occur to anchor the pre-coating to the base or the topcoat to the pre-coat. The aqueous phase acts as a vehicle not only for the binder, but also for the other components. If this water or material penetration is not controlled, there will be excessive material shift from the coating colour to the base, before immobilization of the coating colour will stop this migration. This can result in poor machine runnability, unstable system and uneven coating layer, impacting print quality. The performance of rheology modifiers or thickeners on the coating color have tended to be evaluated by the term, "water retention". This simple term is not sufficient to explain their performance changes during coating. In this paper we are introducing a new concept of "material retention", which takes note of the total composition of the coating colour material and therefore goes beyond the concept of only water retention. Controlled material retention leads to a more uniform z-directional distribution of coating colour components. The changes that can be made to z-directional uniformity will have positive effects on print quality as measured by surface strength, ink setting properties, print gloss, mottling tendency. Optical properties, such as light scattering, whiteness and light fastness delivery should also be improved. Additionally, controlled material retention minimizes changes to the coating colour with time in re-circulation giving less fluctuation in quality in the machine direction since it more closely resembles fresh coating for longer periods. Use of the material retention concept enables paper and board producers to have more stable runnability (i.e. lower process costs), improved end product quality (i.e. better performance of used chemicals) and/or optimized use of coating colour components (i.e. lower total formulation cost)

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.5
• /
• pp.112-120
• /
• 2012

A numerical model considering the internal vaporization and the creep effect, in the form of a analytical program, for tracing the behavior of high strength concrete(HSC) members exposed to fire is presented. The two stages, i.e., spalling procedure and fire resistance time, associated with the thermal, moisture flow, creep and structural analysis, for the prediction of fire resistance behavior are explained. The use of the analytical program for tracing the response of HSC member from the initial pre-loading stage to collapse, due to fire, is demonstrated. Moisture evaporates, when concrete is exposed to fire, not only at concrete surface but also at inside the concrete to adjust the equilibrium and transfer properties of moisture. Finite element method is employed to facilitate the moisture diffusion analysis for any position of member, so that the prediction method of the moisture distribution inside the concrete members at fire is developed. The validity of the numerical model used in this program is established by comparing the predictions from this program with results from others fire resistance tests. The analytical program can be used to predict the fire resistance of HSC members for any value of the significant parameters, such as load, sectional dimensions, member length, and concrete strength.

• Korean Journal of Materials Research
• /
• v.17 no.8
• /
• pp.447-451
• /
• 2007

We investigated the dependence of the various annealing conditions and thickness ($6\sim45nm$) of the Ti-doped $Al_2O_3$ coating on the electrochemical properties and the capacity fading of Ti-doped $Al_2O_3$ coated $LiCoO_2$ films. The Ti-doped-$Al_2O_3$-coating layer and the cathode films were deposited on $Al_2O_3$ plate substrates by RF-magnetron sputter. Microstructural and electrochemical properties of Ti-doped-$Al_2O_3$-coated $LiCoO_2$ films were investigated by transmission electron microscopy (TEM) and a dc four-point probe method, respectively. The cycling performance of Ti-doped $Al_2O_3$ coated $LiCoO_2$ film was improved at higher cut-off voltage. But it has different electrochemical properties with various annealing conditions. They were related on the microstructure, surface morphology and the interface condition. Suppression of Li-ion migration is dominant at the coating thickness >24.nm during charge/discharge processes. It is due to the electrochemically passive nature of the Ti-doped $Al_2O_3$ films. The sample be made up of Ti-doped $Al_2O_3$ coated on annealed $LiCoO_2$ film with additional annealing at $400^{\circ}C$ had good adhesion between coating layer and cathode films. This sample showed the best capacity retention of $\sim92%$ with a charge cut off of 4.5 V after 50 cycles. The Ti-doped $Al_2O_3$ film was an amorphous phase and it has a higher electrical conductivity than that of the $Al_2O_3$ film. Therefore, the Ti-doped $Al_2O_3$ coated improved the cycle performance and the capacity retention at high voltage (4.5 V) of $LiCoO_2$ films.

• Korean Chemical Engineering Research
• /
• v.45 no.4
• /
• pp.400-409
• /
• 2007

Morphology of methane/propane clathrate hydrate crystal was investigated under different undercooling conditions. After the water pressurized with compound guest gas was fully saturated by agitation, medium within the vessel was rapidly undercooled and maintained at the constant temperature while the visual observations using microscope revealed detailed features of subsequent crystal nucleation, migration, growth and interference occurring within liquid pool. The growth of hydrate was always initiated with film formations at the bounding surface between bulk gas and liquid regions under all tested experimental conditions. Then a number of small crystals ascended, some of which settled beneath the hydrate film. When undercooling was relatively small, some of the settled crystals slowly grew into faceted columns. As the undercooling increased, the downward growth of crystals underneath the hydrate film became dendritic and occurred with greater rate and with finer arm spacing. The shapes of the floating crystals within liquid pool were diverse and included octahedron and triangular or hexagonal platelet. When the undercooling was small, the octahedral crystals were found dominant. As the undercooling increased, the shape of the floating crystals also became dendritic. The detailed growth characteristics of floating crystals are reported focused on the influences caused by undercooling and memory effect.

• Korean Journal of Bronchoesophagology
• /
• v.6 no.1
• /
• pp.29-37
• /
• 2000

Background and Objectives : The concentration of sulfur dioxide($SO_2$) gas in the ambient air appears increasing in the industry and urban area day by day. It was known that $SO_2$ is noxious gas. $SO_2$ can be irritating to the eyes, nose, throat, upper respiratory tract and skin. It produces sulfurous acid on contact with water and is extremely irritating to the nasopharynx and respiratory tract. Laminin is a family of extracellular matrix glycoproteins localized in the basement membrane that separates epithelial cells from the underlying stroma. The biological activities of laminin are to promote cell migration, wound healing, growth and differentiation. Meterials and Methods : The histologic changes and the expression of laminin in tracheal mucosa sacrificed at every weeks (to 7 weeks) after continued $SO_2$ exposure of 250ppm for 30 minutes a day were studied in rats. Results : Pathologic tissue was formed at the tracheal mucosa and the underlying tissue by the infiltration of monocytes and epithelium was transformed to the single cell layered epithelium above 5 weeks after exposure. At the 6 weeks after exposure, epithelial cells were partially lost and epithelial cell layer was transformed to be leaf-shaped. Submucosal tissue was transformed to be lymphatic tissue. An intense positive staining for laminin was found in apical cytoplasm and lateral surface of the normal epithelial cells and basement membrane but at the 5 and 6 weeks after exposure, laminin activity was decreased to the moderate activity. At the 7 weeks after exposure, laminin activity was decreased to the weak activity. Conclusion : Our finding suggests that $SO_2$ makes histologic damage on the tracheal mucosa and decreases immunoreactivity for laminin. Longer duration of the exposure of $SO_2$ makes more histologic damage on the tracheal mucosa and decreases immunoreactivity for laminin.

• Analytical Science and Technology
• /
• v.18 no.6
• /
• pp.511-519
• /
• 2005

A method for determination of toluene diisocyanates (TDI) in toluene diisocynate (TDI)-based polyurethane (PUR) packing material was investigated, and also the migration of TDI to food was studied. TDI was extracted using food simulants such as n-haptane and 4% aqueous acetic acid. The determinations were performed using gas chromatography/mass spectrometry (GC/MS). One of major components for polyurethane, toluene diisocyanates, were detected in ten samples among twenty six food contact materials with the concentration range of $0.51{\sim}60.88{\mu}g/ml$. However the highest extracted amount was just 0.7% of $60.88{\mu}g/ml$ if the contact surface of food packing for extracting liquid was limited to the outer layer without exposure of the cutting edge of food packing multi-layers. The result of this study and the analysis method for TDI diisocyanate will be very useful for further study about food contact material, and the monitoring result could be used for evaluating the safety of food contact material before it is to be used for food, preservation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.1-11
• /
• 2016

The effect of the migration of nanoparticles near the wall of a channel on the convective heat transfer in a laminar flow of $SiO_2$ nanoparticle suspensions (nanofluids) under constant wall heat flux boundary conditions was numerically and experimentally investigated in this study. The dynamic thermal conductivity of the aqueous $SiO_2$ nanofluids was measured using T-type thermocouples attached to the outer surface of a stainless steel circular tube (with a length of 1 m and diameter of 1.75 mm). The nanofluids used in this study were synthesized by dispersing $SiO_2$ spherical nanoparticles with a diameter of 24 nm in de-ionized water (DIW). The enhancement of the thermal conductivity of the nanofluids (e.g., an increase of up to 7.9 %) was demonstrated by comparing the temperature profiles in the flow of the nanofluids with that in the flow of the basefluids (i.e., DIW). However, this trend was not demonstrated in the computational analysis, because the numerical models were based on continuum assumptions and flow features involving nanoparticles in a stable colloidal solution. Thus, to explore the non-continuum effects, such as the modification of the morphology caused by nanoparticle-wall interactions on the heat exchanging surfaces (e.g., the isolated and dispersed precipitation of the nanoparticles), additional experiments were performed using DIW right after the measurements using the nanofluids.

• The Journal of Korean Medicine
• /
• v.40 no.2
• /
• pp.17-34
• /
• 2019

Objectives: This study was carried out to observe and compare the effects of Pinellia ternata, Zingiber officinale and Sobanhatang on the reflux esophagitis induced by gastric fundus and pylorus ligation in mice with esomeprazole. Methods: Antioxidant effects were measured by DPPH radical scavenging activity at four different concentration of 0.125, 0.25, 0.5 and $1.0mg/102{\mu}{\ell}$. Zingiber officinale water extract(ZE), Pinellia ternata water extract(PE) and Sobanhatang water extract(SBE) and esomeprazole were treated orally for 14 days before gatric fundus and pylorus ligation. In the histochemistry, changes in suface mucous cells, muscle tissue and connective tissue in gastro esophageal junction(GEJ) and mast cell on the esophageal mucosa were observed. The change of Hemo oxygenase(HO)-1, ghrelin, gastrin and substance P in gastric body tissue were measured by immunohistochemistry. Results: DPPH radical scavenging activity exhibited concentration dependently increases in ZE, PE, SBE. ZE was significantly higher at all concentrations than PE. The gastric surface mucous cells were more in the treated group than in the reflux esophagitis elicited group(GE) in the order of PE, SBE, ZE and esomeprazole treateded group(PT, SBT, ZT, ET). Lower esophageal sphincter muscle damage and intercellular space in the GEJ were less in the treated group than GE. In the esophageal mucosa, the mast cell distribution and the migration of inflammatory cells were lower in the treateded troup than GE in order to ZT, SBT, PT and ET. The antioxidative enzyme, HO-1 was more in the order of ZT, SBT, control group, PT, ET than in GE. ZT was significantly higher than the other groups and SBT was significantly higher than ET. Ghrelin was found to be higher in ZT, ET, SBT and PT than in GE, and ZT was significantly higher than all other groups except ET. Gastrin showed the highest positivity in GE, and was lower in the order of ET, ZT, SBT, PT, and control group. Substance P was the highest in GE, and was lower in the order of ET, ZT, SBT, PT and control group, and PT were significantly lower than ET. Conclusion: ZT, PT and SBT showed superior antioxidative, anti-inflammatory and mucosal protective effects on mouse reflux esophagitis as compared with ET. In particular, ZE was more effective in antioxidant and gastric motility enhancement, while PE was more effective in mucosal protection and anti-inflammatory effects. Sobanhatang is expected to be effective treatment because it has advantages of both drugs and reduces toxicity.

• The Korean Journal of Physiology and Pharmacology
• /
• v.25 no.5
• /
• pp.459-466
• /
• 2021

Cardiovascular disease (CVD) and its complications are the leading cause of morbidity and mortality in the world. Because of the side effects and incomplete recovery from current therapy, stem cell therapy emerges as a potential therapy for CVD treatment, and endothelial progenitor cell (EPC) is one of the key stem cells used for therapeutic applications. The effect of this therapy required the expansion of EPC function. To enhance the EPC activation, proliferation, and angiogenesis using dronedarone hydrochloride (DH) is the purpose of this study. DH received approval for atrial fibrillation treatment and its cardiovascular protective effects were already reported. In this study, DH significantly increased EPC proliferation, tube formation, migration, and maintained EPCs surface marker expression. In addition, DH treatment up-regulated the phosphorylation of AKT and reduced the reactive oxygen species production. In summary, the cell priming by DH considerably improved the functional activity of EPCs, and the use of which might be a novel strategy for CVD treatment.

• Ecology and Resilient Infrastructure
• /
• v.11 no.1
• /
• pp.11-22
• /
• 2024

A fishway is an artificial waterway or device used to resolve difficulties in the movement of fish in a river. Most existing fishways are made of concrete and emit toxic substances, which has a negative impact on the river environment. Accordingly, there is a need to develop fishway construction technology that is eco-friendly and can increase movement efficiency. The technology presented in this study is an integrated porous structure that combines the aggregate with a biopolymer material extracted from castor oil, a non-toxic material. It is a fishway construction technology using eco-friendly materials that can allow vegetation to grow on the surface. In this study, an eco-friendly fishway mixed with biopolymer and aggregate was built on a real scale and the fish movement efficiency was tested and analyzed. As a result of the experiment, a total of 201 fish of 14 species were released with tags inserted, and the detection rate of released fish was confirmed to be 82.6% on average. A total of 40 fish of 6 species were transported upstream through the fishway, and the average passage rate was confirmed to be 21.7%. As a result of checking the circadian migration pattern, it was found that all fish mainly migrate during the day. It was confirmed that there was no significant functional difference between a fishway using biopolymer and a concrete fishway. It is believed that a fishway using biopolymer can be used as a replacement for a concrete fishway.