• 한국수산과학회지
• /
• 제18권2호
• /
• pp.166-179
• /
• 1985

1980년 부터 1983년까지의 한국류자망 어선에 의한 빨강오징어의 어획량, 노력량, 동장 및 표면수온 자료를 기초로 빨강오징어의 계절별 분포와 회유를 밝혔다. 빨강오징어의 어획이 좋았던 수온은 $5{\sim}7$월에는 $15^{\circ}{\sim}16^{\circ}C$, $8{\sim}1$월에는 $13^{\circ}{\sim}18^{\circ}C$이었다. 높은 분포밀도는 8월에는 $18^{\circ}C$등온선 그리고 9월에는 $15^{\circ}C$등온선을 중심으로 한 열전선역에서 나타났다. 북태평양에 있어서 분포밀도가 동부해역보다 서부해역에서 더 높은 것은 해양특성치의 분포경도가 높기 때문이 다. 노력당어획량, 동장조성 및 해양구조를 기초로 북태평양에 있어서 빨강오징어의 회유모델을 작성하였다. 북상기($6{\sim}8$월)에 대형군은 소형군보다 먼저 북상하고 먼저 동방에 출현한다. 추계에는 냉각과 친조의 발달에 따라 아한대전선역으로부터 남하회유를 시작한다. 대형군은 소형군보다 더 북부해역에서 상하를 시작하나 남하도중에 소형군을 추월하여 산란장에 먼저 도달한다.

• International Journal of Oral Biology
• /
• 제33권4호
• /
• pp.179-186
• /
• 2008

Several lines of evidence suggest that osteocytes play a critical role in bone remodeling. Both healthy and apoptotic osteocytes can send signals to other bone surface cells such as osteoblasts, osteoclasts, osteoclast precursors, and bone lining cells through canalicular networks. Osteocytes responding to mechanical strain may also send signals to other cells. To determine the role for osteocytes an mechanical strain in bone remodeling, we examined the effects of fluid flow shear stress on osteoclast precursor cell and osteoblast proliferation and recruitment induced by osteocytes. In addition, the effects of fluid flow shear stress on osteocyte M-CSF, RANKL, and OPG mRNA expression were also examined. MLO-Y4 cells were used as an in vitro model for osteocytes, RAW 264.7 cells and MOCP-5 cells as osteoclast precursors, and 2T3 cells as osteoblasts. MLO-Y4 cells conditioned medium (Y4-CM) was collected after 24h culture. For fluid flow experiments, MLO-Y4 cells were exposed to 2h of pulsatile fluid flow (PFF) at 2, 4, 8, $16{\pm}0.6\;dynes/cm^2$ using the Flexcell $Streamer^{TM}$ system. For proliferation assays, MOCP-5, RAW 264.7, and 2T3 cells were cultured with control media or 10-100% Y4 CM. Cells were cultured for 3d, and then cells were counted. RAW 264.7 and 2T3 cell migration was assayed using transwells with control media or 10-100% Y4-CM. M-CSF, RANKL and OPG in MLO-Y4 mRNA expression was determined by semiquantitative RT-PCR. Y4-CM increased osteoclast precursor proliferation and migration, but decreased 2T3 cell proliferation and migration. CM from MLO-Y4 cells exposed to PFF caused decreased RAW 267.4 cell proliferation and migration and 2T3 migration compared to control Y4-CM. However, Y4-CM from cells exposed to PFF had no effect on 2T3 osteoblastic cell proliferation. PFF decreased RNAKL mRNA and increased OPG mRNA in MLO-Y4 cells compared to control(without PFF). PFF had no effect on M-CSF mRNA expression in MLO-Y4 cells. These results suggest that osteocytes can regulate bone remodeling by communication with osteoclast precursors and osteoblasts and that osteocytes can communicate mechanical signals to other cells.

• 한국식품과학회지
• /
• 제34권6호
• /
• pp.969-976
• /
• 2002

PVC 랩 필름으로 포장된 다양한 국내 식품과 요리의 저장 중 또는 전자렌지에서 데우는 과정 중 이행된 DEHA를 분석하고 이행량에 대하여 조사하였다. Acetone/n-hexane을 이행 실험의 추출 용매로 사용하였다. 지방이 많은 식품에 이행된 DEHA는 GPC를 이용하여 분리 추출 후 분석되었다. 식품에서의 DEHA의 회수율은 $81.3{\sim}91.2%$로 양호한 수준을 나타냈다. 조사된 일반 저장 식품 중 삼겹살에서 22.9 mg/kg으로 가장 높은 DEHA의 이행량을 보였다. 일반적으로 식품의 지방 함량이 높고 저장 기간이 길수록, 또는 저장 온도가 높은 경우 DEHA의 이행량이 증가되는 경향을 보였다. 여러 가지 배달되는 식품으로 이행된 DEHA의 양은 $6.9{\sim}29.8\;mg/kg$이었는데 이 중 지방 함량이 가장 높은 짬뽕으로 가장 높은 이행량을 보였다. 전자렌지로 가열시 랩 필름이 접촉된 경우 쌀밥과 감자에서는 DEHA가 불검출되었으나 피자에서는 158.8 mg/kg까지 매우 높은 양이 검출되었다. 랩 필름을 식품과 간격을 두고 덮었을 경우에는 접촉시켰을 때보다 낮은 이행량을 나타내었다. 조사된 많은 시료에서 DEHA의 이행량이 유럽 기준치를 초과한 것으로 나타났다. 따라서 PVC 랩에서의 DEHA의 이행량을 줄이기 위한 다양한 기술적 개선이 이루어져야 할 것으로 판단된다.

• Computers and Concrete
• /
• 제15권3호
• /
• pp.461-471
• /
• 2015

The permeability is the most direct indicator to reflect the durability of concrete, and the testing methods based on external electric field can be used to evaluate concrete permeability rapidly. This study aims to use an experiment method to accurately predict the permeability of concrete box beam during service. The ion migration experiments and concrete surface resistivity are measured to evaluate permeability of five concrete box beams, and the relations between these results in service concrete and electric flux after 6 hours by ASTM C1202 in the laboratory are analyzed. The chloride diffusion coefficient of concrete, concrete surface resistivity and concrete 6 hours charge have good correlation relationship, which denote that the chloride diffusion coefficient and the surface resistivity of concrete are effective for evaluating the durability of concrete structures. The chloride diffusion coefficient of concrete is directly evaluated permeability of concrete box beam in service and may be used to predict the service life, which is fit to engineering applications and the concrete box beam is non-destructive. The concrete surface resistivity is easier available than the chloride diffusion coefficient, but it is directly not used to calculate the service life. Therefore the mathematical relation of the concrete surface resistivity and the concrete chloride diffusion coefficient need to be found, which the service life of reinforced concrete is obtained by the concrete surface resistivity.

• 동력기계공학회지
• /
• 제4권3호
• /
• pp.81-85
• /
• 2000

The surface gloss of the injection molded part is one of the most significant point for evaluation the quality of products appearance. The effects of molding condition on the gloss of HIPS(High Impact Poly Styrene) molded part were investigated in this work. The measurements of gloss on the surface of molded part were carried out with different melt temperature, mold temperature, injection pressure and holding pressure. We observed the result of HIPS gloss compared with our's previous ABS study. The more melt and mold temperature increased, the brighter the gloss increase. Holding and injection pressure had little effect on the gloss. The gloss was effected in order of melt temperature, mold temperature, injection pressure, holding pressure.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1992년도 추계학술발표강연 및 논문개요집
• /
• pp.6-6
• /
• 1992

Ionized cluster beam deposition (ICBD) technique has been employed to fabricate high-purity crystalline polyimide (PI) film. The pyromellitic dianhydride (PMDA) and oxydianiline (ODA) were deposited using dual ICB sources, Fourier trans forminfraredspectroscopy (FT-IR), X-ray photoemission spectroscopy (XPS), and Transmission electron microscopy (TEM)study show that the bulk and surface chemical properties and the crystalline structure are very sensitive to the ICBD conditions such as cluster ion acceleration voltage and ionization voltage, At optimum ICBD conditions, the PI films have a maximum imidization, negligible impurities(∼1% isoimide), and a good crystalline structure probably due to the high surface migration energy and surface cleaning effect. These characteristics are superior to those of films deposited by other techniques such as colvent cast, vapowr deposition, or sputtering techniques.

• 펄프종이기술
• /
• 제30권3호
• /
• pp.63-72
• /
• 1998

This research was intended to evaluate the effect of carboxymethylcellulose(CMC) on the coating structure and surface strength of coated paper prepared with amphoteric latex based coating color. Printability and optical properties of coated papers were compared. The influence of the consolidation behavior of coating color on the coating structure and the surface strength of coated paper was investigated. Compared with the conventional anionic latex, amphoteric latex formed bulkyer, smoother and more porous coating layer, which in turn, restricted binder migration in the coating layers, and facilitated immobilization of coating colors. However, dry pick strength of coated paper was decreased. The addition of CMC to these systems had strongly influenced on. the consolidation behavior and porosity in the dry state, through forming the network structure of coating layers by the interaction with amphoteric latex particles. Thus, printability and optical properties of coated papers were improved. Results indicated that amphoteric latex could be practically applied to the paper coating to improve printability and optical properties of coated papers.

• Journal of Industrial and Engineering Chemistry
• /
• 제68권
• /
• pp.24-32
• /
• 2018

Nanocellulose was surface-functionalized toward the applications in enhanced oil recovery (EOR) as a green alternative. The focus of this paper is on the effect of this material based nanofluid (NF) on foam lamella stabilization through studying its bubble breakup dynamics and flow behaviors in constricted mircofluidic devices. The NF stabilized foam produced an improved flow resistance across the capillary largely due to the capillary trapped bubbles at the contraction. The "snap-off" caused the NF stabilized foam to produce finer textured bubbles, which can migrate readily forward to the deep porous media, as revealed by the pressure profiles.

• 한국표면공학회지
• /
• 제29권5호
• /
• pp.494-497
• /
• 1996

The effect of implanted nitrogen and carbon ion into SUS 304 on the absorption of hydrogen by cathodic chaging were studied. Implantations of $N^+$, $C^+$ were performed with doses of $3\times10^{17}$ ions $\textrm{cm}^2$ and $5\times10^{17}N^+cm^2$, and $5\times10^{17}C^+cm^2$, at an energy of 90 keV. Nitrides and carbide were investigatedby X-ray diffraction, Auger electron spectroscopy (AES) and scanning electron microscope (SEM). Formation of hydrides during cathodic charging were depressed by a modified surface layer. It is concluded that the both nitrides and carbides act as the barrier of hydrogen migration and the catalyst of desorption of cathodically charged hydrogen.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2003년도 somma/kms meeting
• /
• pp.161-161
• /
• 2003