• ETRI Journal
• /
• 제34권1호
• /
• pp.87-97
• /
• 2012

This study presents an automatic matching method for generating a dense, accurate, and discontinuity-preserved digital surface model (DSM) using multiple images acquired by an aerial digital frame camera. The proposed method consists of two main procedures: area-based multi-image matching (AMIM) and stereo-pair epipolar line matching (SELM). AMIM evaluates the sum of the normalized cross correlation of corresponding image points from multiple images to determine the optimal height of an object point. A novel method is introduced for determining the search height range and incremental height, which are necessary for the vertical line locus used in the AMIM. This procedure also includes the means to select the best reference and target images for each strip so that multi-image matching can resolve the common problem over occlusion areas. The SELM extracts densely positioned distinct points along epipolar lines from the multiple images and generates a discontinuity-preserved DSM using geometric and radiometric constraints. The matched points derived by the AMIM are used as anchor points between overlapped images to find conjugate distinct points using epipolar geometry. The performance of the proposed method was evaluated for several different test areas, including urban areas.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(4)
• /
• pp.210-213
• /
• 2000

In the closed range space, the parallel two CCD cameras are used to acquire a pair of stereo image. The acquired stereo image are computed with Wavelet Transform repeatedly and including the low frequency component, the image size of those are reduced. It is the pyramid structure. The optimum matching point is searched to the pixel. Then appling the optimum matching point to DLT, it extract the three - dimensional surface coordinate from a stereo image. The direct linear transformation(DLT) method is used to calibrate the stereo camera compute the coordinate on a three dimensional space. To find the parameters for the DLT method, 30 control points which marked on the cylinder type object are used. To improve the matching algorithm, the paper select the pyramid structure for Wavelet Transform. The acquired disparity information is used to represent the really three-dimensional surface coordinate.

• 대한조선학회논문집
• /
• 제52권6호
• /
• pp.501-508
• /
• 2015

Lately, much research on hull plate forming has been successful in improving productivity of the forming process. Those researches include forming methods, forming information, and automation. After forming each plate, the fabricated surface is compared with the corresponding designed surface. Two sets of data from the designed and fabricated surfaces are matched in order to complete the forming process. However, only a few papers deals with comparison of two surfaces. This paper presents a new matching method based on the bounding volume hierarchy (BVH). By comparing the conventional method, this new approach using BVH shows not only good agreement but also better advantages.

• International Journal of CAD/CAM
• /
• 제9권1호
• /
• pp.103-109
• /
• 2010

Recently, various conformal geometric methods have been presented for non-rigid surface matching and registration. This work proposes to improve the robustness of conformal geometric methods to the boundaries by incorporating the symmetric information of the input surface. We presented two symmetric conformal mapping methods, which are based on solving Riemann-Cauchy equation and curvature flow respectively. Experimental results on geometric data acquired from real life demonstrate that the symmetric conformal mapping is insensitive to the boundary occlusions. The method outperforms all the others in terms of robustness. The method has the potential to be generalized to high genus surfaces using hyperbolic curvature flow.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2004년도 춘계학술발표회논문집
• /
• pp.209-214
• /
• 2004

This paper presents a RFM-based image matching algorithm which put constraints on the search space through the object-space approach. Also, the detail procedure of generating 3-D surface models from the RFM is introduced as an end-user point of view. The proposed algorithm provides the PML (Piecewise Matching Line) for image matching and reduces the search space to within the confined line-shape area.

• 전자공학회논문지A
• /
• 제29A권2호
• /
• pp.24-32
• /
• 1992

The impedance matching properties of infinite planar arrays of rectangular waveguides with dielectric plug loading and sheath covering are studied here. The effects of several involved parameters on the impedance matching of the phased array antenna are investigated by calculating the reflection coefficients numerically. The improvement of impedance matching and the appearance of forced surface wave resonances are also discussed.

• 반도체디스플레이기술학회지
• /
• 제21권1호
• /
• pp.22-26
• /
• 2022

This paper proposes a new method for the recognition of road surface marks and numbers. The proposed method designates a region of interest on the road surface without first detecting a lane. The road surface markings are extracted by location and size using a connection component analysis. Distortion due to the perspective effect is minimized by normalizing the size of the road markings. The road surface marking of the connected component is recognized by matching it with the stored road marking templates. The proposed method is implemented using C language in Raspberry Pi 4 system with a camera module for a real-time image processing. The system was fixedly installed in a moving vehicle, and it recorded a video like a vehicle black box. Each frame of the recorded video was extracted, and then the proposed method was tested. The results show that the proposed method is successful for the recognition of road surface marks and numbers.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.47-51
• /
• 2005

Using satellite images, an optimal solution to water motion has been presented in this study. Since temperature patterns are suitable tracers in water motion, Sea Surface Temperature (SST) images of Caspian Sea taken by MODIS sensor on board Terra satellite have been used in this study. Two daily SST images with 24 hours time interval are used as input data. Computation of templates correspondence between pairs of images is crucial within motion algorithms using non-rigid body objects. Image matching methods have been applied to estimate water body motion within the two SST images. The least squares matching technique, as a flexible technique for most data matching problems, offers an optimal spatial solution for the motion estimation. The algorithm allows for simultaneous local radiometric correction and local geometrical image orientation estimation. Actually, the correspondence between the two image templates is modeled both geometrically and radiometrically. Geometric component of the model includes six geometric transformation parameters and radiometric component of the model includes two radiometric transformation parameters. Using the algorithm, the parameters are automatically corrected, optimized and assessed iteratively by the least squares algorithm. The method used in this study, has presented more efficient and robust solution compared to the traditional motion estimation schemes.

• 한국멀티미디어학회논문지
• /
• 제6권7호
• /
• pp.1178-1188
• /
• 2003

본 논문에서는 손에 든 비디오 카메라로 촬영한 영상을 결합하여 대형 고해상도 영상을 생성하는 모자익 기법에 관해 기술한다. 기존의 특징점 기반 대응점 검색 기법들이 사람의 개입에 의해 영상을 정합하거나, 형태정보만 이용하는 방법을 사용 하는 것과는 달리 형태정보와 칼라정보를 모두 사용하여 사람의 개입이 없이 자동으로 정확한 중첩영역을 검색하는 방법을 제안한다. 제안한 방법은 인접하는 영상 간에 빠른 속도로 대응점을 추정하여 영상간의 초기 변환관계를 계산하는 보로노이 거리(Voronoi Distance)정합법을 이용하여 비슷한 형태를 가진 후보 영역들을 추출한 다음, 칼라 정보를 이용하여 최종 중첩영역을 찾는다. 이것은 영상내의 특징점을 기준으로 특징점 사이의 거리가 동일하도록 기준영상의 보로노이 평면(Voronoi Surface)을 생성하고 입력영상과 기준 영상간의 정합 부분에서 누적된 보로노이 거리를 최소화하는 대응점을 이항검색 기법으로 추출하는 방법이다. 추출된 계산된 초기 변환행렬은 Levenberg-Marquadt 방법을 통해 최적 변환행렬로 수정되고 이 변환행렬에 의해 영상이 합성되어진다.

• 한국측량학회지
• /
• 제18권3호
• /
• pp.315-322
• /
• 2000

수치표면모형은 어떤 지역 표면의 고도를 표현하는 수치모형이다 이것은 항공사진으로부터 정사영상생성을 생성하는데 필수적인 것이며, 최근에는 항공사진에서 건물과 같은 인공구조물의 추출에도 자주 응용되고 있다 영상정합기술을 사용하면 수치표면모형을 자동적으로 생성할 수 있다. 이 연구에서는 건물지역에 대하여 수치표면모형을 자동적으로 생성하는데 적용할 수 있는 영상정합 방법을 제안하였다. 제안된 정합방법은 중복촬영된 항공사진상에서 공액점과 공액선을 찾아낸다. 공액점을 탐지하는데 있어서는 화소 값간의 상관계수뿐만 아니라 공액점쌍일가능성이 있는 것들간의 위치관계도 비교된다. 공액선 탐지에 있어서는 선 측면의 컬러 속성값, 선의 모양, 인접하는 점 및 선들간의 위치관계, 그리고 선들간의 연결관계가 비교된다. 제안된 정합방법은 건물지역을 포함하는 대상지역의 수치표면모형 자동생성에 유용할 것으로 생각된다.