• Journal of Powder Materials
• /
• v.26 no.2
• /
• pp.138-145
• /
• 2019

In this study, Al-Si-Mg alloys are additively manufactured using a selective laser melting (SLM) process from AlSi10Mg powders prepared from a gas-atomization process. The processing parameters such as laser scan speed and laser power are investigated for 3D printing of Al-Si-Mg alloys. The laser scan speeds vary from 100 to 2000 mm/s at the laser power of 180 and 270 W, respectively, to achieve optimized densification of the Al-Si-Mg alloy. It is observed that the relative density of the Al-Si-Mg alloy reaches a peak value of 99% at 1600 mm/s for 180 W and at 2000 mm/s for 270W. The surface morphologies of the both Al-Si-Mg alloy samples at these conditions show significantly reduced porosities compared to those of other samples. The increase in hardness of as-built Al-Si-Mg alloy with increasing scan speed and laser power is analyzed due to high relative density. Furthermore, it was found that cooling conditions after the heat-treatment for homogenization results in the change of dispersion status of Si phases in the Al-Si matrix but also affects tensile behaviors of Al-Si-Mg alloys. These results indicate that combination between SLM processing parameters and post-heat treatment should be considered a key factor to achieve optimized Al-Si alloy performance.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.8
• /
• pp.42-51
• /
• 2021

Investigations of process parameters are essential when fabricating high-quality parts using additive manufacturing. This study investigates the change in the mechanical characteristics of a SUS316L specimen fabricated using selective laser melting based on the energy density and bead overlap ratio. The SUS316L powder particles were spherical and 35 ㎛ in size. Single-bead and hexahedral shape deposition experiments were performed sequentially. A single bead experiment was performed to obtain the bead overlap ratios for different laser parameters utilizing laser power and scan speed as experimental parameters. A hexahedral shape deposition experiment was also performed to observe the difference in mechanical properties, such as the internal porosity, surface roughness, and hardness, based on the energy density and bead overlap ratio of the three-dimensional printed part. Laser power, scan speed, overlap ratio, and layer thickness were chosen as parameters for the hexahedral shape deposition experiment. Accordingly, the energy density applied for three-dimensional printing, and the experimental parameters were calculated, and the energy density and bead overlap ratio for fabricating parts with good properties have been suggested.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.16 no.1
• /
• pp.1-7
• /
• 1983

In order to improve the quality of canned oyster, canned oyster in oil as control, canned smoked oyster in oil and canned liquid smoked oyster in oil were prepared, and the masking effect of green meat and the stability of their qualities during storage were examined. Three kinds of canned oyster products showed little change in pH, VBN and TBA during 4 months storage in room temperature. In texture of the products, however, hardness and toughness of all the products decreased slightly after 3 months storage, while elasticity and cohesiveness did not change largely up to 4 months storage. Green meat appeared on the surface of canned oyster in oil as control after 30 days storage. And the masking of green meat could be achieved more effectively by dipping treatment of meat for 30 seconds in smoke flavor(Smoke-EZ, Alpha Foods Co., Ltd.) solution than conventional smoking process.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.25 no.2
• /
• pp.368-382
• /
• 1998

The purpose of this study is to evaluate and compare the results of argon laser for 5 seconds, argon laser for 10 seconds, and visible light for 40 seconds photo-polymerization in compressive strength, microhardness, curing depth, temperature rising during polymerization, and polymerization shrinkage. Hybrid type composite resin(Z-100) and compomer(Dyract) were used to be compared. The compressive strength was measured by an Instron(1mm/min cross head speed) in 60 specimens and the microhardness of the surface was expressed by Vickers Hardness Number(VHN) in 30 specimens. The curing depth was evaluated comparing the different values of upper and lower VHN according to irradiation time and thickness for the light source polymerization in 60 specimens. The temperature rising during photopolymerization was observed by the temperature change with thermocouple sensitizer beneath 40 specimens at the argon laser for 10 seconds and visible light 40 seconds irradiation. The polymerization shinkage was evaluated by calculating the decrease of % volume by using a dilatometer in 30 specimens. The results were as follows ; 1. In the case of compressive strength, the argon laser polymerization groups were higher than visible light group in Z-100 (p<0.05). In Dyract, the argon laser 5 seconds group did not show a significant difference with the visible light 40 seconds group. The argon laser 10 seconds group showed the markedly low value when compared with other groups (p<0.05) 2. In microhardness, Z-100 was better than Dyract when comparing by VHNs (p<0.05); however, there was not a significant difference between two materials in the visible light 40 seconds group and the argon laser 10 seconds group. 3. In the study of curing depth, Z-100 showed the consistent polymerization in argon laser irradiation because there was no difference in the VHN decrease according to the thickness change. Over the thickness control, the results did not show a significant difference between visible light and argon laser group in Z-100; however, in the case of Dyract, the visible light 40 seconds group was better than the argon laser groups(p<0.05). 4. There was a significant difference between the two materials in temperature rising during polymerization (p<0.05), but not a significant difference between irradiation times, 5. There was not a significant difference between the two materials in polymerization shrink age. The argon laser 5 seconds group was smaller than the other groups (p<0.05). It could be concluded that Z-100 polymerization was recommended to use the argon laser for reduction of the irradiation time while Dyract was recommended to use the visible light polymerization.

• Food Science and Preservation
• /
• v.20 no.3
• /
• pp.386-393
• /
• 2013

This study was conducted to investigate the change in quality attributes of fresh-cut potatoes with heat and browning inhibitor treatment (CW: dip in the cold water for 30 sec at $4^{\circ}C$, HW: dip in the water for 60 sec at $55^{\circ}C$, AA: dip in the 0.1% solution of ascorbic acid for 60 sec at $4^{\circ}C$, HA: dip in the 0.1% solution of ascorbic acid for 60 sec at $55^{\circ}C$) during storage at $5^{\circ}C$. During storage, fresh-cut potatoes treated with HA showed the lowest value in surface color. PPO and PAL activities of fresh-cut potatoes treated with HA were gradually increased during storage. Hardness, weight loss, soluble solids content and moisture content had no significant difference between the treatments. In sensory acceptance, fresh-cut potatoes treated for HA marked the best quality. Conclusively, heat and browning inhibitor treatment showed the positive effect on browning inhibition while maintaining the quality of fresh-cut potatoes.

• Korean Journal of Heritage: History & Science
• /
• v.44 no.3
• /
• pp.78-91
• /
• 2011

The Usuki Stone Buddha Statues in Japan are carved on mainly dark gray welded lapilli tuff accompanied by lenticular fiamme. This rock is composed of matrix which contains feldspar and opaque minerals with some phenocrysts of quartz and feldspar. The matrix is slight to highly welded. The statues have been weathered and weakened by salt and freezing of water. To enhance the mechanical properties of the rock, consolidants and water repellents were applied. The absorption ratio of the rock was highly decreased after the treatment of the water repellents, the consolidant OH 100, as well. Ultrasonic velocity revealed similarly higher values in the treated rock by KSE 300 and OH 100, compared to non-treated rock. KSE 300, especially, highly increased the Equotip surface hardness. All studied consolidants and water repellents were found to change the original color of the stone. SNL, specifically, resulted the significant change in color. In addition, KSE 300 were observed to improve resistance to weathering such as microcrack and fracture through freezing-thawing test after treatment.

• Korean Journal of Mineralogy and Petrology
• /
• v.35 no.1
• /
• pp.51-64
• /
• 2022

For effective preservation of the rocks, which bearing plant fossils at Gumkwangdong Formation, Pohang, the properties of rock and treatment of chemicals were examined in an artificial weathering test. The rocks are diatomaceous siliceous mudstone, which contain a small amount of smectite and has developed laminated layers. The rocks react with water, the d₀₀₁ spacing of smectite was increased. On the one hand, the physical properties of the rock samples, such as surface hardness, improved after the application of ethyl silicate-based stone strengthener. On the other hand, the spacing of interlayer of swelling clay minerals decreased and spacing of laminae layer increased. When the ethyl silicate-based stone strengthener was applied after pretreatment with a swelling inhibitor, interlayer and spacing of laminae changes were similar to those when only the stone strengthener was treated. The effect of the swelling inhibitor was almost negligible. When the rocks that have been conserved with chemicals react with water, spacing of laminae has widened much, whereas when the rocks was in contact with moisture only, there was little change. In addition, if it is placed in the outdoor after conservation treatment, although it occurs slightly slower than the untreated rock, the separation of the lamination layer and the pulverization of the rock occur within a very short time. Consolidation is required to improve the physical properties of fossil rock, but when exposed to rain and undergoing freeze-thaw process, the effect is lost very quickly. Therefore, regardless of the chemical treatment, it is a priority to prevent direct rainfall contact with the rock.

• Restorative Dentistry and Endodontics
• /
• v.27 no.4
• /
• pp.403-410
• /
• 2002

Several ways of curing are being tried to improve material's properties and reduce marginal gap. However, all are considering about the pattern of light intensity. It was noted from the preliminary study the change of light wavelength from filter changing may give an impact on material's property and microleakage. The object of this study was to verify the effect of filters with various wavelength width on the microhardness and microleakage of composite resin ; hybrid type of DenFil and submicron hybrid type of Esthet X. Composite resins were cured using 3 kinds of filter; narrow-banded(465-475 nm), mid-banded(430-470 nm), wide-banded(400-500 nm). After the estimation of microhardness. degree of dye penetration and the maximum gap from SEM evaluation were done between 4 groups that showed no difference in microhardness value of the lower surface . The results were as follows : 1 Adequate microhardness could not be gained with a narrow-banded filter irrespective of curing time. At the upper surface, DenFil should be polymerized with middle or wide-banded filter for 20 seconds at least, while Esthet X be col$.$ed with middle or wide-banded filter for 30 seconds at least to get simitar hardness value to control group. 2. There was little dye penetration in enamel margin, but all dentin margins skewed much more dye penetration irrespective of curing conditions. Although there was no statistical difference, groups cured with mid-banded filter for 40 seconds and with wide-width filter for 20 seconds showed relatively less dye penetration. 3. It was revealed from the SEM examination that group cured with wide-banded filter had the smallest gap without statistical significance. Spearman's rho test showed that the correlation between the results of dye penetration and SEM examination was very low. From these results, it could be concluded that curing with wide-width filter would be better than the other techniques, even though the curing technique using mid-width filter seems to have its own unique advantage.

• Journal of Conservation Science
• /
• v.26 no.1
• /
• pp.25-32
• /
• 2010

The yellowing is always occurred phenomena in epoxy restoration material of antic-ceramics. For re-restoration of remains with epoxy restoration material, the epoxy elimination step is the first one in all course of restoration In this paper, the chemically elimination treatments methods of epoxy in various antic-ceramics were discussed. We fabricated the epoxy elimination material for antic-ceramics restoration which were made up Dichloromethane and Dichlormethane based Dimethylformamide solution. Dichloromethane and Dichloromethane + Dimethylformamide mixture were applied to epoxy in various antic-ceramic sample. Particularly, Dichloromethane + Dimethylformamide solution had the best result in variation of color change, gloss, vending strength, weight, exfoliation time test after deposition in this solution. Dichloromrthane had the volume increase characteristics for epoxy material and Dimethylformamide had the mollification ones. So, Dichloromathane increased exfoliation in approximal surface of the epoxy material and antic ceramic, and Dimethylformamide decreased the surface hardness of epoxy. In this result, epoxy material even inside of ceramic that have very weak inside bonding is adaptable and stable eliminated. And in order to show the perfect elimination of this material, we successfully dissolve the epoxy restoration material in one antic pottery that is in one university museum's possession using this mixture. So, there is guarantee in the eternity and stabilization of restoration for antic-ceramics.

• Applied Biological Chemistry
• /
• v.42 no.3
• /
• pp.218-222
• /
• 1999

The effects of storage temperature, moisture content and the concentration of additives, such as sucrose fatty acid ester(SE), isomaltooligosaccharide(IO) and glycerin(GL), on texture properties, hardness(HA), cohesiveness(CO) and chewiness(CH) of Baikseolgi after 7 days storage were analyzed by response surface methodology(RSM). The contour values of HA of SE added Baikseolgi at 20, 50 and $80^{\circ}C$ of storage temperate were $1500{\sim}3200,\;500{\sim}1300$ and $100{\sim}400\;g_f$, respectively. The HA of IO or GL added Baikseolgi decreased with increased storage temperature, moisture content and additive concentration. The storage temperature was the most significant factor affecting the HA of Baikseolgi. However, the second and third significant factors were moisture content and additive concentration, respectively. These results imply that the control of storage temperature is the most effective method to increase the storage stability of Baikseolgi. The CO of IO or GL added Baikseolgi was increased by the change of strage temperature from $20{\circ}\;to\;50{\circ}$. While, there was no significant difference between $50{\circ}\;and\;80{\circ}$ of storage temperature. The CO of IO or GL added Baikseolgi was maximized around 40% of moisture content and that of GL added Baikseolgi was minimized around 0.5% of GL concentration. The storage temperature, additive concentration and moisture content were the first, second and third affacing factors on the CO of Baikseolgi, respectively. The CH of Baikeolgi was decreased by increasing storage temperature, moisture content and additive concentration. The storage temperature, moisture content and additive concentration were the first, second and third affacting factors on the CH of Baikseolgi, respectively.