• Advances in nano research
• /
• 제1권2호
• /
• pp.105-109
• /
• 2013

We report dry thermal development of negative resist polystyrene with low molecular weight. When developed on a hotplate at $350^{\circ}C$ for 30 min, polystyrene showed reasonable high contrast and resolution (30 nm half-pitch), but low sensitivity. Resist sensitivity was greatly improved at lower development temperatures, though at the cost of reduced contrast. In addition, we observed the thickness reduction due to thermal development was higher for larger remaining film thickness, implying the thermal development process is not just a surface process and the more volatile chains below the top surface may diffuse to the surface and get evaporated.

• 한국군사과학기술학회지
• /
• 제17권1호
• /
• pp.115-121
• /
• 2014

In this paper, we propose a robust background removal integral projection(BRIP) method which can detect close surface targets in coastal environment for IRST. Row pixels of background region from coastal infrared image show similar response. Thus, the proposed BRIP is calculated after horizontal and vertical background estimations and removals are performed sequentially. Finally, surface large targets can be detected using the results of the BRIP. Experimental results on a set of real infrared image sequence show that the proposed method could fully detect ships in every frame.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.640-641
• /
• 2003

Abnormal oceanic conditions associated with the passage of typhoons are examined using hydrographic and satellite data 1990-2002. During the passage period of typhoons in the Korean waters, an abrupt decrease of sea surface temperature(SST) in range of 5 to 8 $^{\circ}$ was observed. The areas of SST decrease were an order of 100-200km, and the low SST lasted about 15-25 days after passage of typhoon. After passage of typhoon, the water temperatures in the surface mixed layer of 30m show negative anomalies for quite a long period. In addition, stratification parameters were substantially decreased and chlorophyll a density was rapidly increased.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1998년도 춘계학술대회 논문집
• /
• pp.25-29
• /
• 1998

One of the crucial problems that must be solved in a computerised unmanned machining environments requires the development of algorithm in order to predict the reliable cutting conditions on surface roughness. This paper is to develop the mathematical models for choosing the suitable cutting conditions and assist a comprehensive understanding of its machinability properties for cutting process by Ball End Mill. The mathematical equations developed to predict the surface results. It has been found that theoretical results obtained from the empirical equations agree with the experimental results of surface roughness.

• Corrosion Science and Technology
• /
• 제21권6호
• /
• pp.466-475
• /
• 2022

Surface oxides and intergranular (IG) oxidation phenomena in Alloy 600 depending on hydrogen concentration were characterized to obtain clear insight into the primary water stress corrosion cracking (PWSCC) behavior upon exposure to pressurized water reactor primary water. When hydrogen concentration was between 5 and 30 cm³ H₂/kg H₂O, NiFe₂O₄ and NiO type oxides were found on the surface. NiO type oxides were found inside the oxidized grain boundary when hydrogen concentration was 5 cm³ H₂/kg H₂O. However, only NiFe₂O₄ spinel on the surface and Ni enrichment were observed when hydrogen concentration was 30 cm³ H₂/kg H₂O. These results indicate that the oxidation/reduction reaction of Ni in Alloy 600 depending on hydrogen concentration can considerably affect surface oxidation behavior. It appears that the formation of NiO type oxides in a Ni oxidation state and Ni enrichment in a Ni reduction (or metallic) state are common in primary water. It is believed that the above different oxidation/reduction reactions of Ni in Alloy 600 depending on hydrogen concentration can also significantly affect the resistance to PWSCC of Alloy 600.

• 한국정밀공학회지
• /
• 제28권7호
• /
• pp.761-768
• /
• 2011

The large surface micro machining system includes the equipments and processes for manufacturing the ultra precision micro patterned products with large surface through the mechanical machining. Recent major issue on the micro machining technology may be the development of optical parts for the back light unit of display which has the largest market. This special issue makes up with three parts; the large surface micro machining system and machine, machining process and forming process. In this paper, the state-of-the-art and core technology of large surface micro machining system is introduced with focus on the manufacturing technology for the back light unit of LCD TV. Then, some research results on the development of a roll die lathe is introduced which involves the concept of machine design, improvement of thermal characteristics in the spindle system, improvement of relative parallelism and straightness between spindle system and long stroke feed table, machining of micro pitch patterns. Finally, the direct forming process is introduced as the future work in the large surface micro machining field.

• 한국표면공학회지
• /
• 제51권1호
• /
• pp.40-46
• /
• 2018

The light-weight of the research and development materials is actively carried out by overseas automobile companies and technology development continues in Korea. For the sake of fuel efficiency, the development of lightweight technology by improving the manufacturing method has been very effective. Recently, to maximize the effects of light weight, automotive interior parts have been applied by the micro-cellular injection molding using supercritical fluids and we call the Mucell manufacturing. This technique causes a problem in the quality of the surface of the products, because the shooting cells are revealed as the surface layer of the products by forming micro cells at the center of the products during injection molding. To overcome these phenomenon, we increased the temperature of injection molding using joule heating until critical value. In this study, we have predicted the problem of Mucell injection molding through the finite element analysis as changed the temperature by joule heating. From the result of finite element analysis, we have determined the optimized process and made the injection mold included electric current heating system with Mucell manufacturing analyzed the surface characteristics of the injection product according to changing mold temperature.

• 복식
• /
• 제36권
• /
• pp.43-52
• /
• 1998

This study was to analyze properties of the foot form through a development figure of the surface area by factor analysis, cluster analysis, and reglation analysis. This study was performed 71 college women between 19 adn 23 years old residing in Pusan urban area. The result was as follows; 1. There are four factors selected by factor analysis. The 1st factor signifies the surface area of the toe. The 2nd factor signifies the surface area between Metatarsal circumfer-ence and Tarsal circumference. The 3rd factor signifies the surface area between Toe circumference and Metatarsal circumference. The 4th factor signifies the surface area between Heel-ankle circumference. 2. There are three clusters selected by fast cluster. Cluster 1 : The foot size, most parts of foot surface area and total foot surface area are relatively small to other clusters, but the surface area between Metatarsal circumference and Tarsal circumference is relatively large to other clusters. Cluster 2 : The foot size, all parts of foot surface area and total foot surface area are relatively large to other clusters as Cluster 1, but the surface area of the sole of the heel and the ankle is relatively large to other clusters. 3. Total surface area of the foot=-274.94+24.01* Foot lengh+9.28*Metatarsal circumference.

• BMB Reports
• /
• 제50권6호
• /
• pp.285-298
• /
• 2017

The cancer stem cell (CSC) hypothesis has captured the attention of many scientists. It is believed that elimination of CSCs could possibly eradicate the whole cancer. CSC surface markers provide molecular targeted therapies for various cancers, using therapeutic antibodies specific for the CSC surface markers. Various CSC surface markers have been identified and published. Interestingly, most of the markers used to identify CSCs are derived from surface markers present on human embryonic stem cells (hESCs) or adult stem cells. In this review, we classify the currently known 40 CSC surface markers into 3 different categories, in terms of their expression in hESCs, adult stem cells, and normal tissue cells. Approximately 73% of current CSC surface markers appear to be present on embryonic or adult stem cells, and they are rarely expressed on normal tissue cells. The remaining CSC surface markers are considerably expressed even in normal tissue cells, and some of them have been extensively validated as CSC surface markers by various research groups. We discuss the significance of the categorized CSC surface markers, and provide insight into why surface markers on hESCs are an attractive source to find novel surface markers on CSCs.

• 한국군사과학기술학회지
• /
• 제20권3호
• /
• pp.328-336
• /
• 2017

The goal of this study is simulation of optimal search pattern of ships based on performance surface which are reflected underwater environmental. The process is as follows. First, temporal and spatial environmental database are extracted in complex environment and input hull mounted SONAR system parameters. The environmental database and SONAR system parameters are substituted to SONAR equations, and calculate signal excess, detection probability, detection range. And then, the performance surface, which can be used to provide operational insight of SONAR detection performance, are pictorialized. Finally, optimal search pattern of ships are simulated using genetic algorithm based on performance surface. And then, we certify optimal search pattern in various ways.