• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.1-7
• /
• 2017

Cobalt silicide was used as a counter electrode in order to confirm its reliability in dye-sensitized solar cell (DSSC) devices. 100 nm-Co/300 nm-Si/quartz was formed by an evaporator and cobalt silicide was formed by vacuum heat treatment at $700^{\circ}C$ for 60 min to form approximately 350 nm-CoSi. This process was followed by etching in $80^{\circ}C$-30% $H_2SO_4$ to remove the cobalt residue on the cobalt silicide surface. Also, for the comparison against Pt, we prepared a 100 nm-Pt/glass counter electrode. Cobalt silicide was used for the counter electrode in order to confirm its reliability in DSSC devices and maintained for 0, 168, 336, 504, 672, and 840 hours at $80^{\circ}C$. The photovoltaic properties of the DSSCs employing cobalt silicide were confirmed by using a simulator and potentiostat. Cyclic-voltammetry, field emission scanning electron microscopy, focused ion beam scanning electron microscopy, and energy dispersive spectrometry analyses were used to confirm the catalytic activity, microstructure, and composition, respectively. The energy conversion efficiency (ECE) as a function of time and ECE of the DSSC with Pt and CoSi counter electrodes were maintained for 504 hours. However, after 672 hours, the ECEs decreased to a half of their initial values. The results of the catalytic activity analysis showed that the catalytic activities of the Pt and CoSi counter electrodes decreased to 64% and 57% of their initial values, respectively(after 840 hours). The microstructure analysis showed that the CoSi layer improved the durability in the electrolyte, but because the stress concentrates on the contact surface between the lower quartz substrate and the CoSi layer, cracks are formed locally and flaking occurs. Thus, deterioration occurs due to the residual stress built up during the silicidation of the CoSi counter electrode, so it is necessary to take measures against these residual stresses, in order to ensure the reliability of the electrode.

• Food Science and Preservation
• /
• v.19 no.4
• /
• pp.470-476
• /
• 2012

Enzymatic action and microbial growth degrade the quality of fresh-cut lettuce. Browning, a bad smell, and softening during storage are the major forms of quality deterioration. Health-oriented consumers tend to avoid foods treated with chemicals to maintain their freshness. This study was conducted to evaluate the change in the quality of fresh-cut lettuce with combined low-temperature blanching (LB) and ultrasonication (US). The optimum condition was selected using the response surface methodology (RSM), through a regression analysis with the following independent variables; the ultrasonication time (X1), blanching temperature (X2), blanching time (X3), and dependent variable; ${\Delta}E$ value (y). It was found that the condition with the lowest ${\Delta}E$ value occurred with combined 90s US and $45^{\circ}C$ 90s LB (US+LB). The combined treatment group (US+LB) was stored at $10^{\circ}C$ for 9 days with the control group and each single-treatment group, with low-temperature blanching and ultrasonication. Overall, the US+LB group had a significantly high $L^*$ value, which indicates significantly low $a^*$, $b^*$, ${\Delta}E$, browning index, PPO, and POD activity values, and a low total bacteria count (p < 0.05). The US+LB group also had the highest sensory score (except for aroma and texture; p > 0.05).

• Journal of Korea Water Resources Association
• /
• v.55 no.8
• /
• pp.603-611
• /
• 2022

In urban areas, the impermeable area continues to increase due to urbanization, which interferes with the surface penetrating and infiltrating of rainwater, causing most rainwater runoff to the surface, deepening the distortion of water circulation. Distortion of water circulation affects not only flood disasters caused by rainfall and runoff, but also various aspects such as dry stream phenomenon, deterioration of water quality, and destruction of ecosystem balance, and the Ministry of Environment strongly recommends the use of Low Impact development (LID) techniques. In order to apply the LID technique, it is necessary to set a rainwater management target to handle the increase in outflow after the development of the target site, and the current standard sets the rainwater management target using the 10-year daily rainfall. In this study, the difference from the current standards was analyzed through statistical analysis and classification of independent rainfall ideas using inter-event time definition (IETD) in setting the target amount of rainwater management to improve water circulation. Using 30-year rainfall data from 1991 to 2020, methods such as autocorrelation coefficient (AC) analysis, variation coefficient (VC) analysis, and annual average number of rainfall event (NRE) analysis were applied, and IETD was selected according to the target rainfall period. The more samples the population had, the more IETD tended to increase. In addition, by analyzing the duration and time distribution of independent rainfall according to the IETD, a plan was proposed to calculate the standard design rainfall according to the rainwater management target amount. Therefore, it is expected that it will be possible to set an improved rainwater management target amount if sufficient samples of independent rainfall ideas are used through the selection of IETD as in this study.

• Journal of Korea Water Resources Association
• /
• v.55 no.spc1
• /
• pp.1251-1260
• /
• 2022

Recently, due to the deterioration of watermains and the detachment of scale which is accumulated on the watermain surface, water quality accidents in a water supply network occur frequently. As scale accumulated on watermains is stabilized, it may not cause water quality accidents under the normal operating condition. However, due to water hammer or transient flow caused by the abrupt velocity and/or direction of flow change, it can be detached from the watermain surface resulting in water quality accidents. To prevent these kinds of water quality accidents, it is required to remove scale by watermain cleaning regularly. Many researches about flushing which is the most popular water cleaning method are focused on the desirable velocity criteria and the cleaning condition to accomplish the effect of flushing whereas less amount of research effort is given to develop a method to consider whether the desirable velocity for flushing can be obtained before flushing is performed. During flushing, the major and minor headloss is occurred when flushing water flows through a hydrant or drain valve. These headloss may slow down the velocity of flushing water so that it can reduce the flushing effect. Thus, in this study, we suggest a method to simulate the flow velocity of flushing water using "MinorLoss Coefficient" and "Emitter Coefficient" in EPANET. The suggested method is applied to a sample network and the water supply network of "A" city in Korea to compare the flushing effect between "flushing through a hydrant" and "flushing through a drain valve". In case of "flushing through a hydrant", if the hydraulic condition ocurring from a watermain pipe connecting to the inlet pipe of a hydrant to the outlet of a hydrant is not considered, the actual flowrate and velocity of a flow is less than the simulated flowrate and velocity of a flow. In case of "flushing through a drain valve", the flushing velocity and flowrate can be easily simulated and the difference between the simulated and the actual velocity and flowrate is not significant. Also, "flushing through a drain valve" is very effective to flushing a long-length pipe section because of its efficiency to obtain the flushing velocity. However, the number and location of a drain valve is limited compared to a hydrant so that "flushing through a drain valve" has a limited application in the field. For this reason, the engineer should consider various field conditions to come up with a proper flushing plan.

• Korean Journal of Heritage: History & Science
• /
• v.46 no.3
• /
• pp.230-250
• /
• 2013

possessed by Dong-A University Museum is designated as Treasure No. 595, and has been known for a more exquisite, delicate and realistic expression and a colorful three-dimensional structure compared to the 'grass and insect painting' work and its value in art history. However, it has not been analyzed and studied in fabric craft despite it being an embroidered work. This study used scientific devices to examine and analyze the Screen's fabric, thread colors, and embroidery techniques to clarify its patterns and fabric craft characteristics for its value in the history of fabric craft. As a result, consists of eight sides and its subject matters and composition are similar to those of the general paintings of grass and insects. The patterns on each side of the 'grass and insect painting' include cucumber, cockscomb, day lily, balsam pear, gillyflower, watermelon, eggplant, and chrysanthemums from the first side. Among these flowers, the balsam pear is a special material not found in the existing paintings of grass and insect. The eighth side only has the chrysanthemums with no insects and reptiles, making it different from the typical forms of the paintings of grass and insect. The fabric of the Screen uses black that is not seen in other decorative embroideries to emphasize and maximize various colors of threads. The fabric used the weave structure of 5-end satin called Gong Dan [non-patterned satin]. The threads used extremely slightly twisted threads that are incidentally twisted. Some threads use one color, while other threads use two or mixed colors in combination for three-dimensional expressions. Because the threads are severely deterioration and faded, it is impossible to know the original colors, but the most frequently used colors are yellow to green and other colors remaining relatively prominently are blue, grown, and violet. The colors of day lily, gillyflower, and strawberries are currently remaining as reddish yellow, but it is anticipated that they were originally orange and red considering the existing paintings of grass and insects. The embroidery technique was mostly surface satin stitch to fill the surfaces. This shows the traditional women's wisdom to reduce the waste of color threads. Satin stitch is a relatively simple embroidery technique for decorating a surface, but it uses various color threads and divides the surfaces for combined vertical, horizontal, and diagonal stitches or for the combination of long and short stitches for various textures and the sense of volume. The bodies of insects use the combination of buttonhole stitch, outline stitch, and satin stitch for three-dimensional expressions, but the use of buttonhole stitch is particularly noticeable. In addition to that, decorative stitches were used to give volume to the leaves and surface pine needle stitches were done on the scouring rush to add more realistic texture. Decorative stitches were added on top of gillyflower, strawberries, and cucumbers for a more delicate touch. is valuable in the history of paintings and art and bears great importance in the history of Korean embroidery as it uses outstanding technique and colors of Korea to express the Shin Sa-im-dang's 'Grass and Insect Painting'.

• Journal of Bio-Environment Control
• /
• v.21 no.1
• /
• pp.50-56
• /
• 2012

This study was conducted to extend the postharvest life of eggplant ($Solanum$ $melongena$ L.) by modified atmosphere packaging using a OPP bag with 1-MCP to evaluate the alleviation effects of that treatment on external chilling injury during at low temperature. 1-MCP treatment at the level of $1.0{\mu}L{\cdot}L^{-1}$ were very effective in delaying the progress of surface bronzing of eggplant during 10 days of storage at $8^{\circ}C$, but not significant at $1^{\circ}C$. Also, the treatment of 1-MCP at the levels of $0.1{\sim}1.0{\mu}L{\cdot}L^{-1}$ are beneficial to complement low temperature storage and maintain quality indices such as higher firmness and lower weight loss than untreated control even at a critical low temperature 4 to $8^{\circ}C$. The treatment of carbon dioxide using dry ice (DI, 5 g/3 fruits) significantly promoted chilling injury of eggplant stored at $4^{\circ}C$, symptoms were appeared from 3 days after treatment and combination treatment of 1-MCP did not block the development of chilling injury symptom. Meanwhile, single treatment of $CO_2$ absorber (CA, 5 g/3 fruits) or combination treatment with 1-MCP at the level of $1.0{\mu}L{\cdot}L^{-1}$ prevented effectively the external and internal chilling injury at $4^{\circ}C$ during 6 days and 15 days of MAP storage, respectively. Results suggest that 1-MCP and carbon dioxide absorber treatments delay fruit deterioration and are beneficial to broaden storage temperature of eggplant fruits.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.20 no.1
• /
• pp.29-35
• /
• 2010

To compare the quality of manufactured goods distributed in the domestic markets, 6 isolates of Dongchongxiacao products, namely, 4 Paecilomyces tenuipes specimens (J2P, 901A, 901B, and 901C), 1 Cordyceps militaris specimen (901D), and 1 Cordyceps sinensis specimen (CI-1), were analyzed for their physicochemical properties and sequence-structure relationships. P. tenuipes (J2P), a kind of Dongchongxiacao, was successfully inoculated on silkworms by percutaneous infection of Rural Development AdminstraionNam et al., 1999); fruiting bodies were then formed on the complete surface of the pupa. Since P. tenuipes (J2P) from silkworm larva was also proved to have remarkable pharmacological activities, it has been produced in bulk and has been successfully sold to buyers in the Korean market. Additionally, imitation products such as 901A, 901B, 901C, 901D, and CI-1 were sold simultaneously, resulting in deterioration of product quality. This research focuses on establishing quality standards to discriminate between the original and imitation products circulating in the market. The products obtained for the experiments included J2P, 901A, 901B, 901C, 901D, and CI-1; proximate analysis was performed for these products. The hosts and methods of conidia inoculation for proliferation of mycelia differed among the products. P. tenuipes (J2P) was proliferated in live silkworm larvae, and dead silkworm pupae were used to produce 901A, 901B, and 901C. On the other hand, 901D was produced on hulled rice medium. Quality analysis of C. sinensis revealed that CI-1, which was imported from China, smelled bad and proved to be a counterfeit with the fruiting body glued to the insect by twigs. The results of the proximate analysis of 901A, 901B, 901C, and 901D were similar to those of J2P with respect to the moisture content. Otherwise, J2P contained higher crude protein than 901A, 901B, 901C, and 901D, but contained very low fat. C. militaris (901D) and C. sinensis (CI-1) had low crude protein content-12.79% and 9.78% respectively-as compared to that of J2P, which was 62.38%. In contrast to the crude ash content of 6.4% in J2P, the crude ash content of CI-1 was 18.51% and this specimen was found to contain many impurities. phylogenetic analysis of P. tenuipes revealed that the sequence similarity of J2P, 901B, and 901C was in the range of 92.3~92.7%. Additionally, differences in the sequences were found at the positions 65 bp, 436 bp, 441 bp, 463 bp, etc.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 1993.12a
• /
• pp.6-9
• /
• 1993

According to changes in population, economic conditions, life-stile and eating habits, the frui ts and vegetables market wi 11 be shi fted from processed (i. e. , canned) to fresh. Undressed fresh produce, consisting of washed, disinfected and peeled fruits and vegetables that either sliced or grated, are currently increased in demand by retail and institutional market which use them as salad components or in ready-to use foods, Main attributes of minimally processed fruits and vegetables are convenience and fresh-like quality. Minimally processed Products readily deteriorate in quality, especially color and texture, as a result of endogeneous enzyme enhanced respiration and microorganisms which lead to reduced shelf Iife. According to changes in population, economic conditions, life-stile and eating habits, the frui ts and vegetables market wi 11 be shi fted from processed (i. e. , canned) to fresh. Undressed fresh produce, consisting of washed, disinfected and peeled fruits and vegetables that either sliced or grated, are currently increased in demand by retail and institutional market which use them as salad components or in ready-to use foods, Main attributes of minimally processed fruits and vegetables are convenience and fresh-like quality. Minimally processed Products readily deteriorate in quality, especially color and texture, as a result of endogeneous enzyme enhanced respiration and microorganisms which lead to reduced shelf Iife. Thus. to prevent these undesirable changes , val'ious techniques such as controlled atmosphere (CA) storage, modified atmosphere OIA) storage, including vacuum packaging have been receiving considerable attention, Although milch research has been done to find optimal conditions for whole intact frui ts and vegetables, only limi ted information is avai lable on fresh cut. and other minimally processed products. 81 iced frui ts exhibi t increas~d ethylene production and respiration compal'ed to whole f, 'uits during distribution in response to tissue damage. As a result, accelerated senescence and enzymatic browning OCCUI', Recent l'esearch on minimally processed fl'uits and vegetables has mainly focused on methods to inhibit browning, due to ban on use of sulfur dioxide, In order to retard or prevent these physiological changes, val'ious al ternatives, reducing agents. acidulants, chelating agents and inol'ganic sal ts have been evaluated for use on fresh cut fl'ui ts. Al though some agents were effective replacement for sulfur dioxide. consum$\textregistered$I'S demandless use of chemical on such products. Shel~ life of minimally processed products has been extended by inhibition of metabolic reactions associated with loss of quality and by inhibition of aerobic spoilage caused by wide variety of microorganisms. Appl ication of ~I.-\ packaging, including vacuum packaging, retards the rate of respiration, prevents growth of aerobic spoilage organisms, inhibits oxidation and color deterioration. Tissue softening is another major problem in minimally processed products because enzymes re 1 a ted to ce 11 wa 11 degrada t i on are not inactivated. Various treatments have been investigated for retardation of the softening of sliced products. Some studies have concentrated on the application of an active packaging system with ~I, l. packaging and calcium infi 1 tration as possible measures to retain firmness of processed products. In my opinion, one important step for production of minimally processed frui ts wi th favorabl e color of cut surface and firm texture is the selection of better cultivar. As the view, changing tendency of fresh color by apple cultivars and relationship between the tendency and PPO activity will be discussed in the seminar. In addition to the topic, research result on quality enhancement of fresh apple slices by heat shock treatment will be introduced.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.spc1
• /
• pp.29-32
• /
• 2005

This experiment aimed to estimate the effect of imperfect rice on rice palatability. Rice cultivar, Ilpumbyeo, was cultivated by direct-seeding on flooded paddy surface with 11 kg/10a nitrogen application. Palatability of harvested rice was measured by NIR spectroscope. Brown rice was divided according to their appearance namely, perfect, discolored, green-kerneled, and immature opaque with a composition ratio of $75.7\%,\;11.0\%,\;8.0\%,\;and\;5.3\%$ respectively. When the perfect brown rice was milled, the grain were composed of head, cracked, and white core & belly, at $64.7\%,\;25.3\%\;and\;10.0\%$ respectively. The milled rice of discolored brown rice had similar composition with the perfect rice. The milled green-kerneled vice, on the other hand, had $36\%$ head rice and $64\%$ white core & belly rice. The immature opaque brown rice, when milled, had $25.3\%$ white core & belly and $74.7\%$ damage & opaque rice. With the respect to grain quality, the viscosity of white core at belly rice and damaged & opaque rice was lower than that of head rice. In contrast, their protein content was a little higher than that of head rice. The palatability value of pure imperfect rice was much lower than head rice. The palatability value of damaged & opaque rice was the lowest among the imperfect rices. When mixed with head rice, the damaged & opaque rice impacted on the deterioration of vice palatability. Mixing $1\%$ each of white core at belly rice and damaged h opaque rice decreased the palatability value by $5\%$ as compared with the head rice.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.8
• /
• pp.1158-1167
• /
• 2012

During the peeling, cutting, and shredding of wild root vegetables, the surface is exposed to air. This results in a rapid deterioration in quality and an increase in the potential of contamination by microorganisms, both of which reduce the shelf-life of wild root vegetables in retail markets. Thus, in this study, the effects of various washing treatments on the quality of wild root vegetables, including lotus root, burdock root, and bellflower root, were investigated at 10 and $24^{\circ}C$. Lotus root, burdock root and bellflower root were washed with 0.2% acetic acid (AA), 0.2% citric acid (CA), 500 ppm acidified sodium chlorite (ASC), and tap water (TW), which was used as a control, and stored at $10^{\circ}C$ and $24^{\circ}C$. The changes in total plate counts, coliform groups, polyphenol oxidase (PPO) activity, color, pH, and exterior appearance of the samples were then evaluated. The pH and initial microbial contamination levels were reduced when the root vegetables were washed with AA, CA, and ASC. In particular, initial population levels of total plate counts and coliform groups were not detected in lotus root and burdock root that had been washed with ASC and their growth was significantly (p<0.05) inhibited during storage at 10 and $24^{\circ}C$ when compared to the control (TW). In addition, the polyphenol oxidase (PPO) activities of the root vegetables washed with AA, CA and ASC were lower than that of root vegetables washed with TW. ASC was determined to be the most effective treatment for preventing microbial growth, tissue softening, and the development of browning and an unpleasant smell. At $10^{\circ}C$, the overall qualities of the wild root vegetables were maintained longer when compared to $24^{\circ}C$.