• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.324-325
• /
• 2014

Quantum wells infrared photodetectors (QWIPs) have been used to detect infrared radiations through the principle based on the localized stated in quantum wells (QWs) [1]. The mature III-V compound semiconductor technology used to fabricate these devices results in much lower costs, larger array sizes, higher pixel operability, and better uniformity than those achievable with competing technologies such as HgCdTe. Especially, GaAs/AlGaAs QWIPs have been extensively used for large focal plane arrays (FPAs) of infrared imaging system. However, the research efforts for increasing sensitivity and operating temperature of the QWIPs still have pursued. The modification of heterostructures [2] and the various fabrications for preventing polarization selection rule [3] were suggested. In order to enhance optical performances of the QWIPs, double barrier quantum well (DBQW) structures will be introduced as the absorption layers for the suggested QWIPs. The DBWQ structure is an adequate solution for photodetectors working in the mid-wavelength infrared (MWIR) region and broadens the responsivity spectrum [4]. In this study, InGaAs/GaAs/AlGaAs double barrier quantum well infrared photodetectors (DB-QWIPs) are successfully fabricated and characterized. The heterostructures of the InGaAs/GaAs/AlGaAs DB-QWIPs are grown by molecular beam epitaxy (MBE) system. Photoluminescence (PL) spectroscopy is used to examine the heterostructures of the InGaAs/GaAs/AlGaAs DB-QWIP. The mesa-type DB-QWIPs (Area : $2mm{\times}2mm$) are fabricated by conventional optical lithography and wet etching process and Ni/Ge/Au ohmic contacts were evaporated onto the top and bottom layers. The dark current are measured at different temperatures and the temperature and applied bias dependence of the intersubband photocurrents are studied by using Fourier transform infrared spectrometer (FTIR) system equipped with cryostat. The photovoltaic behavior of the DB-QWIPs can be observed up to 120 K due to the generated built-in electric field caused from the asymmetric heterostructures of the DB-QWIPs. The fabricated DB-QWIPs exhibit spectral photoresponses at wavelengths range from 3 to $7{\mu}m$. Grating structure formed on the window surface of the DB-QWIP will induce the enhancement of optical responses.

• Journal of Wetlands Research
• /
• v.22 no.2
• /
• pp.161-170
• /
• 2020

Constructed wetlands (CWs) are widely used to solve water quality problems caused by diffuse pollution from agricultural areas; however, phytoplankton blooms in CW systems can occur due to long hydraulic retention time (HRT), high nutrient loading, and exposure to sunlight. This study was conducted to evaluate the efficiency of a CW designed to treat agricultural diffuse pollution and develop a design concept to improve the nature-based capabilities of the system. Monitoring was conducted to assess contribution of individual wetland components (i.e. water, sediments, and plants) in the treatment performance of the system. During dry days, the turbidity and particulates concentration in the CW increased by 80 to 197% and 10 to 87%, respectively, due to the excessive growth of phytoplankton. On storm events, the concentration of particulates, organics, and nutrients were reduced by 43% to 70%, 22% to 49%, and 15% to 69% due to adequate water circulation and constant flushing of pollutants in the system. Based on the results, adequate water circulation is necessary to improve the performance of the CW. Free water surface CWs are usually designed to have a constant water level; however, the climate in South Korea is characterized by distinct dry and rainy seasons, which may not be suitable for this conventional design. This study presented a concept of multifunctional design in order to solve current CW design problems and improve the flood control, water quality management, and environmental functions of the facility.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.1
• /
• pp.60-68
• /
• 2012

In this study, the manufacturing process of micro capsulized PCM (phase changing material) for thermal storage performance of latent heat was investigated to save energy during the use of buildings: i.e. use of melamine-type resin as the micro-capsule material and paraffin wax as the inner material that are together used in concrete walls. For the manufacturing process of the micro-capsulized PCM, the amount of SDS addition as surfactant was the key variable and the resulting thermal storage performance depended on the SDS amount. With increasing amount of SDS, the micro capsulation became much easier while the capsule surface became harder. The micro capsules became uniform at an optimum SDS addition. The addition of SDS also affected the thermal capacity: with increasing SDS amount, the heat storage and release tendency at melting point was more clearly manifested. The current investigation is part of a study under progress to explore the use of PCM in concrete walls to save building maintenance cost and energy.

• The Korean Journal of Quaternary Research
• /
• v.3 no.1
• /
• pp.87-101
• /
• 1989

The development of the Hantan river basin can be divided into three stages. The first stage include the ancient Hantan channel system prior to the Chongokni basalt which yield dates of about 0.6 mya from the K/Ar dating method. During this period the Baekuyri formation was formed. The Baekuyri formation is widely observed under the Chongokni basalt along the current river system. The second stage is the period when stream channels stayed on the top of the basalt plateau. Aggradation and deggradation were continued by meandering and braiding channel systems until major stream channel was formed. The currently remaining deposit on the top of the basalt was formed by lacustrine and fluvial systems in this period. During this period Pleistocene hominid was present on edge of water and flood plain and left Paleolithic material. This period was begun at the time of the final basalt flow dated about 300,000 BP. The third stage is designed for the time when the Hantan river channel was dropped down to a level from which the channel could not influence the top of the basalt any more No more deposit could be formed but erosion by surface water has been continued on the top of the basalt since then. The dropping of the Hantan river channel was probably not very long after the final flow of the basalt. Because of frost action and heavy concentrated precipitation in the basin area along with blocky and clumnar joint structure of the basalt, erosional process of the basalt is believed to have been carried out within a relatively short time. The lowering of the Hantan river channel was probably completed in a cycle of major fluctuation of world cimate. Also, the redclay on the top of the basalt is believed to have been formed during a warm period around 200,000 BP, which accords with the climatic change suggested above fair1y well. The Paleolithic materials in tile deposits fell accordingly into approximately same time period.

• The Korean Journal of Quaternary Research
• /
• v.23 no.2
• /
• pp.48-55
• /
• 2009

To investigate the paleoceanographic environmental changes around the Okinawa Trough, Japan, a piston core (RN88-PC5) was conducted on benthic foraminiferal species composition, assemblage, sedimentological and geochemical analyses. Trubidite sediment intercalated in studied core contains different benthic foraminiferal species, dwelling in shallow coral reef species, from normal hemipelagic sediment. These different benthic foraminiferal species and its assemblage are interpreted as reworked sediment when turbidite current occurred, synchronically. Grain size analysis clearly showed that mean grain size difference occurred between trubidite and hemipelagic sediments. Geochemical analysis also showed the difference of chemical composition between two sedimentary facies. Results of the foraminiferal oxygen isotope analysis showing global surface water warming records since the last 10 ka. The geochemcial analysis and previous works showed that turbidite sediment of studied core indicating sporadic occurrence of regional paleoceanographic events. Assemblage of shallow coral reef benthic foraminifera especially occurred with turbidite layer clearly support the sporadic occurrence of paleoceanographic events such as regional earthquake.

• Journal of the Korean Electrochemical Society
• /
• v.5 no.2
• /
• pp.52-56
• /
• 2002

Tin oxide was coated on graphite particle by sol-gel method and an electrode with this material having microcrystalline structure for lithium ion battery was obtained by heat treatment in the range $400-600^{\circ}C$. The content of tin oxide was controlled within the range of $2.25wt\%\~11.1wt\%$. The discharge capacity increased with the content of tin oxide and also initial irreversible capacity increased. The discharge capacity of tin oxide electrode showed more than 350 mAh/g at the initial cycle and 300 mAh/g after the 30th cycle in propylene carbonate(PC) based electrolyte whereas graphite electrode without surface modification showed 140 mAh/g. When the charge and discharge rate was changed from C/5 to C/2, The discharge capacity of tin oxide and graphite electrode showed $92\%\;and\;77\%$ of initial capacity, respectively. It has been considered that such an enhancement of electrode characteristics was caused because lithium $oxide(Li_2O)$ passive film formed from the reaction between tin oxide and lithium ion prevented the exfoliation of graphite electrode and also reduced tin enhanced the electrical conduction between graphite particles to improve the current distribution of electrode.

• Journal of Periodontal and Implant Science
• /
• v.29 no.4
• /
• pp.821-838
• /
• 1999

On the basis of the evidences that electrical stimulation could enhance proliferation and differentiation of bone cells and promote healing and regeneration of bone, this study was performed to investigate the effects of electrical stimulation on human periodontal ligament cells and gingival fibroblasts in vitro, which also have important roles in regeneration of periodontium, and to evaluate the potential of clinical application of electrical stimulation. Human periodontal ligament cells and gingival fibroblasts were primarily cultured from the root surface of extracted premolar and the adjacent gingiva without periodontal diseases. In control group, the cells ($5{\times}10^4$ cells/ml)were incubated only in Dulbecco's Modified Eagle's Medium contained with 10% fetal bovine serum. In test groups, electrical stimulation was given at the current intensity of $0.25{\mu]A$(test group 1), $1.0{\mu}A$(test group 2), and $2.5{\mu}A$(test group 3) for 12 hours to the same culture media with the control group. After 12 hour exposure of electrical stimulation, the cells were incubated for 2 and a half days(60 hours), and then each group of cells was analyzed for cell proliferation, protein level, and activity of alkaline phosphatase. The results were as follows ; 1. The Rate of cell proliferation of every test group increased significantly in both periodontal ligament cells and gingival fibroblasts, and in periodontal ligament cells, test group 3 showed significantly increased proliferation compared to the other test groups(p<0.05). 2. In the protein levels, neither periodontal ligament cell nor gingival fibroblast showed statistically significant differences between control and test groups. 3. The activity of alkaline phosphatase in periodontal ligament cells increased significantly in all test groups(p<0.05), but there were no significant differences between 3 test groups. In gingival fibroblasts, the activity of alkaline phosphatase increased significantly only in test group 3(p<0.05). From the above results, it is concluded that electrical stimulation may have beneficial effects on the regeneration of destructed periodontal tissue in regard of the stimulation of periodontal ligament cells and gingival fibroblasts as well as electrically stimulated bone formation that has been known, and that electrical stimulation may have the potential of clinical application.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.18 no.2
• /
• pp.81-93
• /
• 2015

The comprehensive master plan in November 2010 on Saemangeum internal development has been released, and there is a need for complementary measures related to in-situ monitoring methods in order to acquire water temperature (T) and salinity (S) data. Thus, these data are monitored and analyzed by Korea Rural Community Corporation continuously. The purposes of current study are to evaluate the distributions of seasonal T and S, sigma-t, and stratification parameter and to compare annual stratification system in 2011 and 2012. To achieve these objectives, monthly vertical changes of T, S, and sigma-t, which are reproduced by a kriging technique, have been analyzed. In summer, the temperature difference between surface and bottom layers varies from 2 to $3^{\circ}C$, and the stratification of T is considerably weak. The stratification of S occurs abruptly within depth of EL. (-)5 to EL. (-)10 m. Therefore, stratification is induced by sudden increasing of water inflow amount due to a localized downpour during the rainy season, and these stratification processes are strongly influenced by inflowing a fresh water from watersheds in estuary environment.

• Asian Journal of Atmospheric Environment
• /
• v.9 no.2
• /
• pp.114-127
• /
• 2015

In the Mexico City Metropolitan Area (MCMA), ozone ($O_3$) concentration is still higher than in other urban areas in developed countries. In order to reveal the current state of photochemical air pollution and to provide data for validation of chemical transport models, vertical profiles of meteorological parameters and ozone concentrations were measured by ozonesonde in two field campaigns: the first one, during the change of season from wet to dry-cold (November 2011) and the second during the dry-warm season (March 2012). Unlike previous similar field campaigns, ozonesonde was launched twice daily. The observation data were used to analyze the production and distribution of ozone in the convective boundary layer. The observation days covered a wide range of meteorological conditions, and various profiles were obtained. The evolution of the mixing layer (ML) height was analyzed, revealing that ML evolution was faster during daytime in March 2012 than in November 2011. On a day in November 2011, the early-morning strong wind and the resulting vertical mixing was observed to have brought the high-ozone-concentration air-mass to the ground and caused relatively high surface ozone concentration in the morning. The amount of produced ozone in the MCMA was estimated by taking the difference between the two profiles on each day. In addition to the well-known positive correlation between daily maximum temperature and ozone production, effect of the ML height and wind stagnation was identified for a day in March 2012 when the maximum ground-level ozone concentration was observed during the two field campaigns. The relatively low ventilation coefficient in the morning and the relatively high value in the afternoon on this day implied efficient accumulation of the $O_3$ precursors and rapid production of $O_3$ in the ML.

• Applied Microscopy
• /
• v.40 no.4
• /
• pp.237-244
• /
• 2010

Utricularia forms small, but complex carnivorous trap along the stem either in water or in soil depending upon species. The shapes and sizes of the traps, appendages, and trichomes are known to differ among aquatic, terrestrial and epiphytic species. In the present study, the morphology and microstructure of the trap in aquatic Utricularia japonica and terrestrial U. livida were examined using light and electron microscopy. The aim of this study was to compare the characteristics of trap features between the aquatic and terrestrial species. The trap was found to be comprised of a thin walled bladder with numerous capitate trichomes, two-armed bifid and four-armed quadrifid glands in both species; however, the traps of the two species were different in size, and number and morphology of the trichomes and glands. Aquatic Utricularia was chlorenchymatous with chloroplasts distributed throughout the body, whereas the terrestrial species was translucent without plastids due to an adaptation to underground habitats. Furthermore, the former differed considerably in that the traps developed antenna and appendages around the entrance area. A peculiar trap entrance was also noted in U. livida, which exhibited radiating rows of various trichomes within funnel-shaped tissue. A large number of glandular trichomes covered the entrance area and door surface with four trigger hairs each in the aquatic form but only two in the terrestrial form. The glandular trichomes near the door secreted a large amount of mucilage that temporarily composed the velum in the U. japonica, however, it was not observed in the terrestrial species. All of the aforementioned features were highly related in their structure and function during carnivorous mechanism in Utricularia. The current findings provide important data for further comparison of the different life forms within Utricularia.