• Journal of Electrical Engineering and Technology
• /
• v.9 no.2
• /
• pp.682-685
• /
• 2014

In this paper, we presented the window applicable blind-type frequency selective surface to control the coverage area of wireless communication in secure building or conference room. The proposed frequency selective structure has the reconfigurable frequency range depends on its blind rotation angle. To verify the proposed structure, we fabricated the window blind-type frequency selective surface with four-legged loaded element and ring-type element as a unit cell and performed measurements of the transmission characteristics for different blind rotation angles to prove the feasibility. The measurement results show good agreements with the simulation results. One of the advantages is that the proposed structure does not need to have a bias circuit, so it is very easy to implement at low cost and also can be applied to any planar surface for wireless security applications.

• Journal of Korean Society of Forest Science
• /
• v.31 no.1
• /
• pp.43-47
• /
• 1976

This study was carried out to find out the effect of soil and water storable pits on reducing the surface runoff. 10 pits were digged in each plot of $50m^2$ along contour line. One kind of pits has a size of 30 cm width, 100cm length and 30cm depth, and the other has 30cm width, 100cm length and 20cm depth. 1. The soil and water storable pits have a significant effect on reducing surface runoff. Control plot had surface runoff 2.3-2.6 times more than the plots with pits. 2. There is no significant difference in surface runoff between 30cm depth pit and 20cm depth pit. 3. The soil and water storable pits did not have any effect on coverage, survival and growth of three species. 4. Steep slope had worse results than the other slopes in coverage, growth and fresh weight of experiment species.

• Korean Journal of Metals and Materials
• /
• v.46 no.5
• /
• pp.289-295
• /
• 2008

The effect of the alloy elements(Si/Mn) ratio on the coating quality including wettabilty with molten zinc, galvannealing kinetics and crater has been investigated in interstitial-free high strength steel(IFHSS) containing Si and Mn. When the Si/Mn ratio was below 0.75, IF-HSS exhibited a good wettability leading to a good galvannealed coating quality after annealing at $800^{\circ}C$ for 40s in $15%H_2-N_2$ mixed gas with dew point $-60^{\circ}C$. In contrast, the wettability and galvannealed coating quality were deteriorated in the Si/ Mn ratio above 0.75. It is shown that they have relevance to oxides forms by selective oxidation on the steel surface. The oxide particles dispersed on the steel surface with a surface coverage of below 40% resulted in good wettability and galvannealed coating quality. The oxide particle is mainly consisted of $Mn_2SiO_4$ with low contact angle in molten zinc. On the other hand, the continuous oxide layer on the steel surface, such as network- and film-type,caused to poor wettability and galvannealed coating quality. The coverage of oxide layer was above 80%, and its chemical species was $SiO_2$ with high contact angle in molten zinc. Consequently, the Si/Mn alloy ratio played an importance role in galvannealed coating quality of IF-HSS.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.344-344
• /
• 2011

W(110)면에 흡착원자인 Al원자의 coverage와 annealing과정에서의 온도를 변화시켜, 여러 조건에서의 Al/W(110)계의 흡착구조를 저에너지 전자회절(LEED)과 이온산란분광법(ISS-TOF)을 이용하여 연구하였다. 여러 결과 중, annealing 온도가 900K인 1.0ML Al/W(110)면은 double domain의 p($1{\times}1$)의 흡착구조로 W(110)면의 center of hollow site에서 $0.55{\AA}$ 벗어난 위치에 흡착되었으며, W(110) 표면원자로부터 Al 원자까지의 높이는 $2.13{\pm}0.15{\AA}$이다. 또한 annealing 온도가 1100K인 0.5ML Al/W(110)면은 double domain의 p($2{\times}1$)의 흡착구조로 W(110)면의 center of bridge site에 흡착되었으며, W(110) 표면원자로부터 Al 원자까지의 높이는 $2.18{\pm}0.15{\AA}$이다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.185-185
• /
• 2011

서로 결정구조가 다른 물질 사이의 계면을 연구하기 위해 실온에서 W(bcc) 표면에 Al(fcc)를 성장시켜, 그 흡착구조를 연구하였다. 실온에서 W(110)면에 Al원자를 0.5 ML, 1.0 ML, 2.0 ML, 3.0 ML과 4.0 ML으로 증착시켜 Al/W(110)계의 흡착구조를 저에너지 전자회절(LEED)을 이용하여 관찰하였고, 각 coverage의 Al/W(110)계에서 이온산란분광법(CAICISS-TOF)을 이용하여 흡착구조를 연구하였다. 연구결과, Al의 coverage가 증가함에 따라 표면의 Al이 crystal되어, 4.0 ML Al/W(110)계에서 Al은 6-fold symmetry를 이루는 fcc 구조의 (111)면으로 성장하였으며 성장된 Al(111)면의 [T10]방향과 [1T0]방향이 substrate인 W(110)면의 [001]방향과 서로 평행한 double domain의 표면구조이다.

• Journal of Biosystems Engineering
• /
• v.25 no.4
• /
• pp.287-292
• /
• 2000

The herbicide penetration on weed leaves was spatially analyzed by using chlorophyll fluorescent emission and machine vision technique. Velvetleaf and metribuzin were used as experimental materials in the study. The herbicide spray images were obtained by a combinaton of a fluorescent dye and a UV lighting system. The herbicide penetration was analyzed by means of detecting chlorophyll fluorescent emission under blue-green lighting. According to the experiment results, the number and the size of spray droplets decreased with coverage increasing. The herbicide penetrated mainly along leaf veins and the time for complete penetration over the whole leaf was approximately 100 minutes after herbicide spraying. When the coverage of herbicide droplets on the surface of leaves increased, the speed of herbicide penetration also increased. This study suggested a way of characerizing herbicide spatial penetration and distribution in leaves.

• Journal of the Korean institute of surface engineering
• /
• v.37 no.1
• /
• pp.5-12
• /
• 2004

The enhancement of adhesion for Cu film on polycarbonate (PC) surface with the $Ar/O_2$ gas plasma treatment and dc-bias sputtering was studied. The plasma treatment with this reactive mixture changes the chemical property of PC surface into hydrophllic one, which is shown by the variation of contact angle with surface modification. The micro surface roughness that also gives the high adhesive environment is increased by the $Ar/O_2$ gas plasma treatment. These results were observed distinctly from the atomic force microscopy (AFM). The negative substrate dc-bias effect for the Cu adhesion on PC was also investifated. Accelerated $Ar^{+}$ lons in sheath area of anode bombard the bare surface of PC during initial stage of dc bias sputtering. PC substrate. therefore, has severe roughen and hydrophilic surface due to the physical etching process with more activated functional group. As dc-bias sputtering process proceeds, morphology of Cu film shows better step coverage and dense layer. The results of peel test show the evidence of superiority of bias sputtering for the adhesion between metal Cu and PC.C.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.05
• /
• pp.123-126
• /
• 1997

We present a method for the estimation of 3D solid angle assessment of the acetabular coverage of the femoral head in 3D space. At first, femoral head and acetabulum is segmented from the original CT scan images. The slice thickness is 1.5mm and the number of slices is usually 30-40 to cover the entire acetabulum. The superior half of the femoral head is modeled as part of a sphere. Thus, the axial cross sections of the upper half of the femoral head are also modeled as circles. A set of points from each outline image of femoral head is fitted recursively into a circle by minimizing root-mean-square (RMS) error. With these fitted circles, a center point of the femoral head model is evaluated. This is a reference point for calculating the solid angle of the acetabular inner surface. Next, the tangent lines connecting from a set of points of the acetabular edge to the center of the fitted sphere are obtained. The lines pass through the unit sphere whose center is the same as that of the femoral head. With the points on the unit sphere, we calculate area and estimate the solid angle. Based on this solid angle, the deformity of the acetabulum is analyzed. In case of normal subject, the solid angle is about 4.3 (rad) and acetabular coverage is 68%.

• Journal of People, Plants, and Environment
• /
• v.24 no.4
• /
• pp.441-450
• /
• 2021

Background and objective: The purpose of study is to analyze the three-dimensional (3D) structure by creating a 3D model for green spaces in a park using unmanned aerial vehicle (UAV) images. Methods: After producing a digital surface model (DSM) and a digital terrain model (DTM) using UAV images taken in Mureung Park in Chuncheon-si, we generated a digital tree height model (DHM). In addition, we used the mean shift algorithm to test the classification accuracy, and obtain accurate tree height and volume measures through field survey. Results: Most of the tree species planted in Mureung Park were Pinus koraiensis, followed by Pinus densiflora, and Zelkova serrata, and most of the shrubs planted were Rhododendron yedoense, followed by Buxus microphylla, and Spiraea prunifolia. The average height of trees measured at the site was 7.8 m, and the average height estimated by the model was 7.5 m, showing a difference of about 0.3 m. As a result of the t-test, there was no significant difference between height values of the field survey data and the model. The estimated green coverage and volume of the study site using the UAV were 5,019 m² and 14,897 m³, respectively, and the green coverage and volume measured through the field survey were 6,339 m² and 17,167 m³. It was analyzed that the green coverage showed a difference of about 21% and the volume showed a difference of about 13%. Conclusion: The UAV equipped with RTK (Real-Time Kinematic) and GNSS (Global Navigation Satellite System) modules used in this study could collect information on tree height, green coverage, and volume with relatively high accuracy within a short period of time. This could serve as an alternative to overcome the limitations of time and cost in previous field surveys using remote sensing techniques.

• Analytical Science and Technology
• /
• v.18 no.6
• /
• pp.460-468
• /
• 2005

The biotin-avidin complex, as a model recognition system, has been constructed through N-hydroxysuccinimide(NHS) reaction on a variety of substrates such as a smooth Au film, electrochemically roughened Au electrode and chemically modified mica. Stepwise self-assembled monolayers (SAMs) of biotin-avidin system were characterized by surface-enhanced resonance Raman scattering (SERRS) spectroscopy, atomic force microscopy (AFM) and surface plasmon resonance (SPR). A strong SERRS signal of rhodamine tags labeled in avidin from the SAMs on a roughened gold electrode indicated the successful complex formation of stepwise biotin-avidin recognition system. AFM images showed the circular shaped avidin aggregates (hexamer) with ca. $60{\AA}$ thick on the substrate, corresponding to one layer of avidin. The surface coverage and concentration of avidin molecules were estimated to be 90% and $7.5{\times}10^{-12}mol/cm^2$, respectively. SPR technique allowed one to monitor the surface reaction of the specific recognition with high sensitivity and precision.