• 한국정밀공학회지
• /
• 제13권9호
• /
• pp.156-164
• /
• 1996

Tool interference is one of the most critical problems in machining die cavities and punches. When machining concave or convex regions of cavities with large radius tool in rough cutting, the tool easily overcuts or undercuts the portions of the surface, which result in machining inaccuracy. So the generation of interference-free tool path must be required for more efficient rough cutting. In this paper, we present a method for modeling die cavities which consist of simple surface or analytic compoyund surfaces and present an algorithm for checking and removing the tool interference occurred in machining the die cavities. Using these algorithms, we can represent a die cavity, and check the interfer- ence regions, and then remove these interferences. Especially we focus on the side interference in the sides of analytic elements and base surface boundary.

• 대한기계학회논문집
• /
• 제17권7호
• /
• pp.1668-1677
• /
• 1993

The objective of this paper is to develop a computational model for predicting the fatigue propagation of collinear multiple surface cracks under constant amplitude and variable amplitude loadings. After examining fatigue crack growth behavior for CT specimens and single surface crack specimens, empirical equations of(11) and(12) are proposed for the prediction of fatigue life in a multiple surface crack geometry. The accuracy of the proposed model is verified using a life prediction computer program. Several case studies were performed to check the accuracy of the proposed model and to verify the usefulness of the developed program. Good agreement is observed between the numerical results based on the proposed model and the published experimental data.

• 소성∙가공
• /
• 제19권4호
• /
• pp.236-241
• /
• 2010

The frictional behavior of bare steel sheet highly depends on surface roughness. It was investigated that the change of surface roughness of bare steel sheet due to deformation for each forming mode. The flat type friction test was done to check the effect of surface roughness change on frictional characteristics of bare steel sheet. As increasing the deformation, the Ra value was increased at stretching forming mode and drawing forming mode, however the change of Pc showed different trends. The Pc was decreased as increasing stretch deformation but increased at compression deformation. At drawing forming mode, the friction coefficient was increased as deformation was increased after initial big drop with drawing oil. As deformation was increased, the friction coefficient was decreased with drawing oil at stretching forming mode. The results show that the deformation changes the surface roughness and frictional characteristics of steel sheet but the effect depends on the forming mode.

• 대기
• /
• 제25권4호
• /
• pp.707-718
• /
• 2015

This study investigates the characteristics of turbulent fluxes observed at Ieodo Ocean Research Station (IORS) in autumn 2014. The 10 Hz IORS data is quality controlled and calculated to be the 30 minutes turbulent fluxes. The quality control consists of five steps: a weather check, Vickers and Mahrt (VM) sequential check, VM parallel check, flag check, and direction check. Since the IORS is an open-sea station with no orographic influence, there are no significant diurnal variations for the turbulent fluxes and 10 m wind speed. According to stabilities, the unstable and semi-unstable states appear more than 28% and 70% in autumn, respectively and they have strong winds of over $10m\;s^{-1}$. In addition, the turbulent fluxes increase with increasing wind speed. In particular, the latent heat flux and its deviations are clearly shown because the latent heat flux is influenced by the change of both the sea surface roughness and wave height induced by the wind. To demonstrate the changes of the turbulent fluxes before and after typhoon, Vongpong (1419), which is the most intense typhoon affecting the Korean Peninsula in 2014, is considered. The turbulent flux fluctuates in accordance with the location of Vongpong. The turbulent fluxes have a large (small) variation when Vongpong approaches (retreats) at the IORS. The overall results represent that the IORS data helps us understand physical processes related to air-sea interaction by providing the valuable and reliable observed data.

• Journal of the Korean Wood Science and Technology
• /
• 제32권4호
• /
• pp.18-26
• /
• 2004

변장 14 cm 재장 2.4 m인 대단면재의 전도가열, 고주파가열 및 복합가열에 의한 진공건조특성을 조사하였다. 건조속도는 복합가열에서 가장 컸고, 고주파가열에서 가장 적었다. 비에너지는 고주파가열에서 가장 컸고, 전도가열에서 가장 적었다. 진공건조목재의 횡단방향 함수율분포는 전도가열과 복합가열의 경우 불록한 형태를 나타냈으나, 고주파가열의 경우는 한쪽 표층에서 반대쪽 표층으로 향해 증가하는 경향을 나타내었다. 건조목재의 재장방향 함수율은 전도가열과 복합가열의 경우 횡단면이 중심부위보다 낮았고 고주파가열의 경우 횡단면이 중심보다 높았다. 표면할렬과 횡단면할렬은 전도가열진공건조에서 가장 심하였다. 내부할렬은 어떠한 가열방법에 의한 건조에서도 발생하지 않았다. 복합가열 진공건조 특성은 전도가열과 고주파가열간의 절충된 중간적 경향을 나타냈다.

• 유통과학연구
• /
• 제15권2호
• /
• pp.111-120
• /
• 2017

Purpose - Service employees who work at airline check-in counters in airport are typically employed to undergo emotional labor. Emotional labor of airport service employees is an important managerial issue that must be solved. This study attempts to examine the underlying mechanism of emotional labor on turnover intention. It focuses on the consequences of emotional labor of service employees. The purpose of this study is to examine and empirically test how the two-types of emotional labor(deep-acting & surface-acting) of service employees differently affect the level of their job satisfaction and job stress. It also investigates the relationship between job satisfaction, job stress, and turnover intention. For this purpose, first, this study identified the structural relationship between emotional labor, job satisfaction, job stress, and turnover intention. Second, it investigated the mediating effects of job satisfaction between deep-acting and turnover intention. Research design, data, and methodology - To empirically test these structural relationships among research variables, data were collected by a interview from service manager of domestic airline companies and survey from 179 service employees who are working at single domestic airline check-in counters in airports in Korea using a self-rating questionnaire with total 19 items dealing with emotional labor, job satisfaction, job stress, and turnover intention. To test the research hypotheses, collected data were analyzed by confirmatory factor analysis (CFA) and structure equation model (SEM). Results - This study obtains meaningful research results. The results from this study are as follows. First, deep-acting has a positive effect on job satisfaction, whereas, deep-acting has a negative effect on job satisfaction. Second, surface-acting has a positive effect on job stress, whereas, the effects of surface-acting on job satisfaction did not show statistically significant result. Also, job satisfaction has partial mediating roles to the relationship between deep-acting and turnover intention. Conclusions - Based on the results of this empirical study, emotional labor of service employees is one of the key factors influencing their job satisfaction and job stress. In particular, deep-acting is the important factor in emotional labor to increase job satisfaction and reduce job stress. Finally, theoretical, managerial implications, and research limitations are mentioned in discussion parts.

• Journal of the Korean Wood Science and Technology
• /
• 제29권2호
• /
• pp.91-99
• /
• 2001

목재산업에서 생산성과 품질 향상을 위해서는 공정의 자동화가 절실히 요구되고 있다. 화상처리시스템의 현장 적용성 개선을 위해 국산 소나무와 상수리나무 및 서어나무를 대상으로 옹이, 할렬, 수피 등과 같은 주요 결함들을 인식해내는 알고리듬을 개발하였다. 목재가공공정에서 컨베이어 위를 이동하고 있는 목재를 가상하여 제재목의 규격과 목제품의 품질에 영향을 주는 표면결함들을 대상으로 그 형태와 크기 및 위치를 인식할 수 있는 화상 처리기술을 개발하였다. 화상처리를 이용하여 결함으로 인식된 각 라벨에 대해 8가지의 특성을 개발, 결함인식의 기준으로 사용하였으며, 8가지 특성을 이용하여 수종별 결함 추출의 제한 조건을 마련한 후 필터링을 실시하여 실제 결함과 결함으로 인정되지 않는 라벨을 구분하였다. 또한 수종별로 가장 효과적인 기준의 적용절차를 밝히므로써 결함 인식의 오차를 줄이는 한편, 처리대상 수종에 대한 유연성을 확보하고자 하였다. 한편, 컨베이어를 이동하고 있는 목재의 규격이나 표면상태에 관련된 모든 자료들이 database의 형태로 작성되도록 하여 이후 실제 산업현장에 대한 적용 가능성을 타진하고자 하였다. 그 결과 소나무와 상수리나무 표변에 존재하는 옹이의 오인률은 1% 이하로 매우 우수하였으며, 상수리나무의 할렬과 서어나무의 수피에 대한 오인률도 13% 이하로 낮출 수 있었다.

• Smart Structures and Systems
• /
• 제21권1호
• /
• pp.65-74
• /
• 2018

In this article, an analytic non-classical model for the free vibrations of nanobeams accounting for surface stress effects is developed. The classical continuum mechanics fails to capture the surface energy effects and hence is not directly applicable at nanoscale. A general beam model based on Gurtin-Murdoch continuum surface elasticity theory is developed for the analysis of thin and thick beams. Thus, surface energy has a significant effect on the response of nanoscale structures, and is associated with their size-dependent behavior. To check the validity of the present analytic solution, the numerical results are compared with those obtained in the scientific literature. The influences of beam thickness, surface density, surface residual stress and surface elastic constants on the natural frequencies of nanobeams are also investigated. It is indicated that the effect of surface stress on the vibrational response of a nanobeam is dependent on its aspect ratio and thickness.

• Journal of the Korean Wood Science and Technology
• /
• 제15권3호
• /
• pp.24-33
• /
• 1987

This study was executed to investigate scanning electron microscopic characteristics of Korean Rhus lacquer coats. With the unrefined coat, distilled water, sodium hydroxide, acetic acid, ethyl alcohol, cold-check test, and accelerated weathering were performed after refining treatment. These treated lacquer coats were discussed through observation by scanning electron microscope and the obtained results were summarized as follows: 1. Compared with unrefined coat, the refined coat of Korean Rhus lacquer showed more even surface with regular distribution of dispression. 2. Korean Rhus lacquer coat heated at $120^{\circ}C$ for 3 hours revealed no observable difference irrespective of refining and unrefining. 3. Korean Rhus lacquer coat treated by distilled water, sodium hydroxide, acetic acid. ethyl alcohol, cold-check test. and ultraviolet radiation showed significant characteristics compared with untreated coat. Especially. large deformation and checkings were observed by cold-check test and ultraviolet radiation respectively. 4. The Korean Rhus lacquer coat radiated by ultraviolet ray showed 0.11 duller and 1.41 brighter than non-radiated coat through color difference calculator.

• 복식문화연구
• /
• 제24권6호
• /
• pp.873-885
• /
• 2016

It is common knowledge that a conventionally woven textile consists of two assemblies of parallel threads (warp and weft), one interlaced with the other at ninety degrees. Where each of the two assemblies is arranged in a particular colour sequence, a check design, known as a 'tartan', may be created. Although similar check-type cloths have been produced worldwide, it is the tartans of Scotland which have received most attention and it is here that a complex set of rules evolved and tartans of different types became associated traditionally with different regions, family groups or 'clans'. There is an impressive array of publications focused on the identification of tartans and their clan associations. This paper explains the nature of tartans, analyses typical surface structures, ratios and proportions, and suggests possible avenues of use for modern designers. The principal sources of data were a collection of tartans held at ULITA - An Archive of International Textiles (University of Leeds, UK) and Stewart's 1974 publication The Setts of Scottish Tartans. Based on the observation that divisions into halfs and thirds were dominant, a series of templates is presented with the intention of developing an awareness among designers that ratios and proportions used in familiar or traditional frameworks can be employed in a modern context.