• 공업화학
• /
• 제5권1호
• /
• pp.139-148
• /
• 1994

실리카에 담지된 헤테로폴리산 촉매에서 아산화질소에 의한 메탄의 부분산화반응을 연구하였다. 여러 가지의 반응조건, 즉 반응온도, 반응물의 분압, 접촉시간, 촉매의 담지량 및 전처리온도 등이 전환율이나 생성물의 선택도 및 속도론에 미치는 영향이 연구되었다. 20 wt%로 담지된 촉매가 전환율과 포름알데히드의 수율에 있어서 가장 높은 값을 보여 주었다. 메탄은 전환반응에서의 속도식을 구한 결과, 메탄에 대해서는 1차식을 보여 주었고, 아산화질소에 대한 반응차수는 약 0.4였다. 또한 전체반응의 겉보기 활성화에너지는 30.78 kcal/mole 이었다. 반응물 중에 첨가된 소량의 사염화탄소는 메탄의 산화반응에서 실리카 담지 HPMo 촉매의 활성을 증가시키는 반면에, 반응물에 첨가된 물은 오히려 활성을 감소시키는 것을 볼 수 있었다.

• Corrosion Science and Technology
• /
• 제11권6호
• /
• pp.275-279
• /
• 2012

Ni-W alloy deposits have lately attracted the interest as an alternative surface treatment method for hard chromium electrodeposits because of higher wear resistance, hardness at high temperature, and corrosion resistance. This study deals with influences of process variables, such as electodeposition current density, plating temperature and pH, on the internal stress of Ni-W nanocrystalline deposits. The internal stress was increased with increasing the applied current density. With increasing applied current density, the grain size of the deposit decreases and concentration of hydrogen in the deposit increases. The subsequent release of the hydrogen results in shrinkage of the deposit and the introduction of tensile stress in the deposit. Consequently, for layers deposited at high current density, cracking occurs readily owing to high tensile stress value. By increasing the temperature of the electrodeposition from $60^{\circ}C$ to $80^{\circ}C$, the internal stress was decreased. It seems that an increase in the number of active ions overcoming the activation energy at elevated temperature caused a decline in the concentration polarization and surface diffusion. It decreased the level of hydrogen absorption due to the lessened hydrogen evolution reaction. Therefore, the lower level of hydrogen absorption degenerated the hydride on the surface of the electrode, resulting in the reduction of the internal stress of the deposits. By increasing the pH of the electrodeposition from 5.6 to 6.8, the internal stress in the deposits were slightly decreased. It is considered that the decrease in internal stess of deposits was due to supply of W complex compound in cathode surface, and hydrogen ion resulted from decrease of activity.

• 한국표면공학회지
• /
• 제49권3호
• /
• pp.260-264
• /
• 2016

In this study, fractured surface morphology and mechanical properties of Ni-Cr-Mo alloys with various contents of Mo for dental material use have been evaluated by mechanical test. The alloys used were Ni-13Cr-xMo alloys with Mo contents of 4, 6, 8, and 10 wt.%, prepared by using a vacuum arc-melting furnace. Ni-13Cr-xMo alloys were used for mechanical test without heat treatment. The phase and microstructure of alloys using an X-ray diffraction (XRD) and optical microscopy (OM) were evaluated. To examine the mechanical properties of alloys according to microstructure changes, the tensile test and the hardness test were carried out using tensile tester. To understand the mechanism of Mo addition to Ni-Cr alloy on mechanical property, the morphology and fractured surfaces of alloys were investigated by field-emission scanning electron microscope (FE-SEM). As a result, 79Ni-13Cr-8Mo alloy was verified that the tensile strength and the hardness were better than others. Varying Mo content, the changes of microstructures of alloys were identified by OM and SEM and that of 79Ni-13Cr-8Mo alloy was proved fabricated well. Microstructures of alloys were changed depending on Mo content ratio. It has been observed that 8% alloy had the most suitable mechanical property for dental alloy.

• 한국표면공학회지
• /
• 제50권5호
• /
• pp.352-359
• /
• 2017

The growth of nanocrystalline diamond films on a p-type poly silicon substrate was studied using microwave plasma chemical vapor deposition method. A 6 mm thick poly silicon plate was mirror polished and scratched in an ultrasonic bath containing slurries made of 30 cc ethanol and 1 gram of diamond powders having different sizes between 5 and 200 nm. Upon diamond deposition, the specimen scratched in a slurry with the smallest size of diamond powder exhibited the highest diamond particle density and, in turn, fastest diamond film growth rate. Diamond deposition was carried out applying different DC bias voltages (0, -50, -100, -150, -200 V) to the substrate. In the early stage of diamond deposition up to 2 h, the effect of voltage bias was not prominent probably because the diamond nucleation was retarded by ion bombardment onto the substrate. After 4 h of deposition, the film growth rate increased with the modest bias of -100 V and -150 V. With a bigger bias condition(-200 V), the growth rate decreased possibly due to the excessive ion bombardment on the substrate. The film grown under -150V bias exhibited the lowest contact angle and the highest surface roughness, which implied the most hydrophilic surface among the prepared samples. The film growth rate increased with the apparent activation energy of 21.04 kJ/mol as the deposition temperature increased in the range of $300{\sim}600^{\circ}C$.

• 한국진공학회지
• /
• 제7권2호
• /
• pp.77-81
• /
• 1998

RHEED(Reflection High Energy Electron Diffraction)상(pattern)의 거울반사점 (specular spot) 강도의 주기적인 진동을 이용하여, 계면금속(surfactant)Sn을 흡착하지 않은 경우와 흡착한 경우 Ge(111)표면 위에서 Ge의 층상성장을 조사하였다. 계면금속을 흡착하지 않았을 경우, 기판온도 $200^{\circ}C$에서 반점의 강도가 24ML정도 안정되게 진동하는 것으로 보 아, Ge층상성장의 최적온도로 생각되었다. 계면금속(Sn) 0.5ML를 Ge(111) 표면위에 흡착시 킨 후, Ge성장에서는 기판온도 $200^{\circ}C$에서 성장초기에 불규칙한 진동이 나타났으며, 반점강 도의 주기적인 운동이 흡착하지 않은 경우 보다 더 큰 진폭으로 38ML이상까지 관찰되었으 며 Ge이 성장하는 동안 d2$\times$2 구조의 변화가 없었다. 이는 계면금속이 교환작용으로 성장표 면 쪽으로 편석(segregation)하면서 흡착원자의 표면확산 거리를 저해시켜 3차원적 핵성장 에 의한 층상성장을 저해하고 대신 2차원적 성장을 도우는 것으로 생각된다.

• Journal of Electrochemical Science and Technology
• /
• 제13권2호
• /
• pp.237-253
• /
• 2022

The methyl 2-(1,3-dithietan -2- ylidene)-3-oxobutanoate (MDYO) and 2-(1,3-dithietan-2-ylidene) cyclohexane -1,3-dione (DYCD) were synthesized and tested at various concentrations as corrosion inhibitors for 316L stainless steel in 1 M HCl using weight loss, electrochemical impedance spectroscopy (EIS), potentiodynamic polarization (PDP), surface analysis techniques (SEM / EDX and Raman spectroscopy) and Functional Density Theory (DFT) was also used to calculate quantum parameters. The obtained results indicated that the inhibition efficiency of MDYO and DYCD increases with their concentration, and the highest value of corrosion inhibition efficiency was determined in the range of concentrations investigated (0.01 × 10^-3 - 10^-3 M). Polarization curves (Tafel extrapolation) showed that both compounds act as mixed-type inhibitors in 1M HCl solutions. Electrochemical impedance spectra (Nyquist plots) are characterized by a capacitive loop observed at high frequencies, and another small inductive loop near low frequencies. The thermodynamic data of adsorption of the two compounds on the stainless steel surface and the activation energies were determined and then discussed. Analysis of experimental results shows that MDYO and DYCD inhibitors adsorb to the metal surface according to the Langmuir model and the mechanism of adsorption of both inhibitors involves physisorption. SEM-EDX results confirm the existence of an inhibitor protective film on the stainless steel surface. The results derived from theoretical calculations supported the experimental observation.

• 분석과학
• /
• 제37권1호
• /
• pp.63-78
• /
• 2024

The continuous increasing of the global demand of copper and nickel metals raises the interest in developing alternative technologies to produce them from copper sulfide ore. Also, in line with Egypt's vision 2030 for achieving the sustainable socioeconomic development which aims at developing alternative and eco-friendly technologies for processing the Egyptian ores to produce these strategic products instead of its importing. These metals enhance the advanced electrical and electronic industries. The current work aims at investigating the recovery of copper and nickel from Abu Swayeil copper ore using pug leaching technique by sulfuric acid. The factors affecting the pug leaching process including the sulfuric acid concentration, leaching time and temperature have been investigated. The copper ore sample was characterized chemically using X-ray fluorescence (XRF) and scanning electron microscope (SEM-EDX). A response surface methodology develops a quadratic model that expects the nickel and copper leaching effectiveness as a function of three controlling factors involved in the procedure of leaching was also investigated. The obtained results showed that the maximum dissolution efficiency of Ni and Cu are 99.06 % and 95.30%, respectively which was obtained at the following conditions: 15 % H₂SO₄ acid concentration for 6 hr. at 250 ℃. The dissolution kinetics of nickel and copper that were examined according to heterogeneous model, indicated that the dissolution rates were controlled by surface chemical process during the pug leaching. The activation energy of copper and nickel dissolution were 26.79 kJ.mol^-1 and 38.078 kJ.mol^-1 respectively; and the surface chemical was proposed as the leaching rate-controlling step.

• 공업화학
• /
• 제16권4호
• /
• pp.527-532
• /
• 2005

이온성고분자-금속복합체(Ionic Polymer Metal Composites, IPMC)는 전기활성 고분자이며, 낮은 구동전압에서도 큰 변위를 나타내는 유연한 스마트 소재(soft smart material)이다. 이온성고분자-금속복합체의 표면전극 제조는 일반적으로 화학적 환원방법(무전해 전기도금)에 의해 제조되고 있지만, 이러한 방법에서는 그 재료가 다공성 고분자 막으로 표면이 균일한 전극을 제조하기에 어려움이 있다. 본 연구에서는 전극의 표면 저항을 감소시켜 응답속도를 증가시킴과 동시에 낮은 전압에서 큰 변위를 낼 수 있는 IPMC 제조방법을 고안하여 수행하였다. 화학적 환원방법으로 이온고분자-금속 복합체를 형성시킨 후, 이온빔보조증착법(Ion Beam Assisted Deposition)으로 균질한 표면 전극 층을 형성시켜 화학적 특성을 개선하여 전기적 자극에 의한 구동반응 속도를 향상시킬 수 있는 구동체 제조방법을 제안하였다.

• 마이크로전자및패키징학회지
• /
• 제25권4호
• /
• pp.75-81
• /
• 2018

Cu-Cu 웨이퍼 본딩 강도를 향상시키기 위한 Cu 박막의 표면처리 기술로 $Ar-N_2$ 플라즈마 처리 공정에 대해 연구하였다. $Ar-N_2$ 플라즈마 처리가 Cu 표면의 구조적 특성에 미치는 영향을 X선 회절분석법, X선 광전자 분광법, 원자간력현미경을 이용하여 분석하였다. Ar 가스는 플라즈마 점화 및 이온 충격에 의한 Cu 표면의 활성화에 사용되고, $N_2$ 가스는 패시베이션(passivation) 층을 형성하여 -O 또는 -OH와 같은 오염으로부터 Cu 표면을 보호하기 위한 목적으로 사용되었다. Ar 분압이 높은 플라즈마로 처리한 시험편은 표면이 활성화되어 공정 이후 더 많은 산화가 진행되었고, $N_2$ 분압이 높은 플라즈마 시험편에서는 Cu-N 및 Cu-O-N과 같은 패시베이션 층과 함께 상대적으로 낮은 수치의 산화도가 관찰되었다. 본 연구에서는 $Ar-N_2$ 플라즈마 처리가 Cu 표면에서 Cu-O 형성 억제 반응에 기여하는 것을 확인할 수 있었으나 추가 연구를 통하여 질소 패시베이션 층이 Cu 웨이퍼 전면에 형성되기 위한 플라즈마 가스 분압 최적화를 진행하고자 한다.

• 한국운동역학회지
• /
• 제21권4호
• /
• pp.429-436
• /
• 2011

In this study, we have experimented with 9 players at the national delegate level. Although there were some differences in the average effects of 3 types of one-two straight movements after the application of wheel axle, there were no statistical differences in the case of surface reacting forces, electromyograms, and impact forces. When the right fist was impacted using the one-two straight movements and the wheel axle was applied with 3 segmentations, high impact forces were obtained for the pronation in the following order-72.01 $m/s^2$ (type 2), 70.93 $m/s^2$ (type 3), and 58.19 $m/s^2$ (type 1). Higher values of the surface reacting force were found for type 1 that did not exhibit pronation in the left foot, whereas in the case of the vertical direction of the right foot, type 2 with pronation exhibited higher values and impact forces. In the right electromyogram, high impact forces due to the activation of the muscular electric potential were obtained for lumbar erector (LE) spinae and triceps brachii (TB) with type 1; LE spina, latissimus dosi (LD), and upper trapezius (UT) with type 2; and brachioradialis (BR), UT, and rectus abdominal (RA) with type 3. Due to pronation and complex motions of the 3 pronation segmentations, the efficiency was higher for impacts due to one-two straight movements.