• Korean Journal of Metals and Materials
• /
• v.46 no.10
• /
• pp.691-699
• /
• 2008

Electrochemical characteristics of Ti-30Ta-xZr alloys coated with HA/TiN by using magnetron sputtering method were studied. The Ti-30Ta containing Zr(3, 7, 10 and 15wt%) were 10 times melted to improve chemical homogeneity by using a vacuum furnace and then homogenized for 24hrs at $1000^{\circ}C$. The specimens were cut and polished for corrosion test and coating, and then coated with HA/TiN, respectively, by using DC and RF-magnetron sputtering method. The analyses of coated surface and coated layer were carried out by using optical microscope(OM), field emission scanning electron microscope(FE-SEM) and X-ray diffractometer(XRD). The electrochemical characteristics were examined using potentiodynamic (-1,500 mV~ + 2,000 mV) and A.C. impedance spectroscopy(100 kHz ~ 10 mHz) in 0.9% NaCl solution at $36.5{\pm}1^{\circ}C$. The microstructure of homogenized Ti-30Ta-xZr alloys showed needle-like structure. In case of homogenized Ti-30Ta-xZr alloys, a-peak was increased with increasing Zr content. The thickness of TiN and HA coated layer showed 400 nm and 100 nm, respectively. The corrosion resistance of HA/TiN-coated Ti-30Ta-xZr alloys were higher than that of the non-coated Ti-30TaxZr alloys, whic hindicate better protective effect. The polarization resistance($R_p$) value of HA/TiN coated Ti-30Ta-xZr alloys showed $8.40{\times}10^5{\Omega}cm^2$ which was higher than that of non-coated Ti-30Ta-xZr alloys.

• Korean Journal of Applied Biomechanics
• /
• v.32 no.1
• /
• pp.31-36
• /
• 2022

Objective: The purpose of this study was to investigate muscle activation according to the four strap lengths in the TRX plank exercise to provide scientific and accurate data on effective training methods. Method: Twenty healthy men who had at least 6 months of weight training experience and could fully adjusted plank exercise, were participate in this study (age: 25.2 ± 3.7 yrs., height: 174.2 ± 3.9 cm., weight: 71.2 ± 9 kg). To pursue the study purpose, surface electrodes were attached to trunk muscles (pectoralis major, rectus abdominis, external oblique, internal oblique, erector spinae, latissimus dorsi) and lower extramity muscles (gluteus maximus, rectus femoris, gastrocnemius), and the muscle activity was measured using 11-channel electromyography equipment. In order to verify the muscle activation according to the four strap lengths during TRX plank exercise, an one-way ANOVA with repeated measure was used with statistical significance level set at as α=.05. Results: First, there were statistically significant differences in pectoralis major, rectus abdominis, external oblique, internal oblique, and erector spinae among TRX strap lengths. Second, there were statistically significant differences in gluteus maximus, rectus femoris, and gastrocnemius among TRX strap lengths. Third, even though no statistically significant difference found in latissimus dorsi, but increased muscle activation tendency was showed as the length of the strap increased. Conclusion: From the results of this study, it may be possible that TRX exercise prevent injuries and improve lower extremity muscle as well as trunk muscles by setting appropriate length of strap.

• Composites Research
• /
• v.35 no.4
• /
• pp.288-297
• /
• 2022

This study investigated the effect of addition of zirconia(zirconium oxide) powder on the curing behavior of phenolic resins. The heating rate controlled curing and isothermal curing behaviors of the phenol resin according to the content of the zirconia powder were analyzed. The viscosity and thermal decomposition characteristics of the phenolic resin with the zirconia content were also examind. From the DSC analysis, the degree of cure and the rate of cure were obtained. Finally, the activation energy for the cure reaction were calculated from the DSC data of the zirconia added phenolic resin. As a found, the higher the zirconia content, the longer the curing was delayed and the greater the activation energy required for curing. Additionally, the TGA result that as the content of zirconia increased, less weight loss was observed. The surface tackiness of the Carbon/Phenol prepreg was partially changed according to the zirconia content, but had no significant effect.

• The Journal of Korean Physical Therapy
• /
• v.35 no.5
• /
• pp.145-150
• /
• 2023

Purpose: This study examined the effects of ankle control training using neuromuscular electrical stimulation (NMES), leg muscle activation, and balance in stroke patients. Methods: Thirty-one stroke patients diagnosed with cerebral infarction and cerebral hemorrhage were selected for the study. The experimental group underwent ankle control training using NMES, while the control group applied NMES to the paretic tibialis anterior muscle for 30 minutes per session, five times a week for four weeks. The muscle activity changes were measured using surface electromyography, and balance parameters were evaluated using a functional reach test (FRT). Results: The intra-group comparison of the concentric muscle activity revealed improvements in the experimental group, including paretic tibialis anterior (TA) muscle (p<0.05), medial gastrocnemius muscle (MG) (p<0.01), and lateral gastrocnemius muscle (LG) (p<0.05), as well as MG (p<0.05), LG (p<0.05), soleus muscle (p<0.05) of the non-paretic side, and soleus muscle symmetry index (p<0.05). The intra-group comparison of the eccentric muscle activity showed improvements in the experimental group, including MG (p<0.01) and LG (p<0.01) of the paretic side, as well as MG (p<0.01), LG (p<0.01) of the non-paretic side, and LG symmetry index (p<0.01). The intra-group comparison of the functional reach test revealed significant differences in the test results in the experimental and control groups (p<0.05). Conclusion: Ankle control training using NMES had a positive effect on the changes in muscle activation and improved balance in patients with stroke.

• IMMUNE NETWORK
• /
• v.21 no.2
• /
• pp.13.1-13.19
• /
• 2021

Macrophages are important for the first line of defense against microbial pathogens. Integrin CD11b, which is encoded by Itgam, is expressed on the surface of macrophages and has been implicated in adhesion, migration, and cell-mediated cytotoxicity. However, the functional impact of CD11b on the inflammatory responses of macrophages upon microbial infection remains unclear. Here, we show that CD11b deficiency resulted in increased susceptibility to sepsis induced by methicillin-resistant Staphylococcus aureus (MRSA) infection by enhancing the pro-inflammatory activities of macrophages. Upon infection with MRSA, the mortality of Itgam knockout mice was significantly higher than that of control mice, which is associated with increased production of TNF-α and IL-6. In response to MRSA, both bone marrow-derived macrophages and peritoneal macrophages lacking CD11b produced elevated amounts of pro-inflammatory cytokines and nitric oxide. Moreover, CD11b deficiency upregulated IL-4-induced expression of anti-inflammatory mediators such as IL-10 and arginase-1, and an immunomodulatory function of macrophages to restrain T cell activation. Biochemical and confocal microscopy data revealed that CD11b deficiency augmented the activation of NF-κB signaling and phosphorylation of Akt, which promotes the functional activation of macrophages with pro-inflammatory and immunoregulatory phenotypes, respectively. Overall, our experimental evidence suggests that CD11b is a critical modulator of macrophages in response to microbial infection.

• Journal of The Korean Society of Integrative Medicine
• /
• v.12 no.3
• /
• pp.155-161
• /
• 2024

Purpose : Wearing high-heeled shoes leads to foot and ankle instability, which requires leg muscles to remain in constant contraction. In order to adapt to the instability of the feet and ankles caused by wearing high heels, the muscles of the legs continuously repeat contraction and relaxation. Previous studies of the impact of stair climbing in high-heeled shoes have involved placing the entire stepping area of the shoe on the stair. However, high-heeled shoe wearers sometimes unconsciously contact the stair using only half of the stepping area. Therefore, the objective of this study was to examine differences in leg and ankle muscle activation according to stepping area during stair climbing in high-heeled shoes. Methods : Twenty young women in their early 20s voluntarily agreed to participate in this study. We used surface electromyography to measure gastrocnemius and tibialis anterior activation in the right leg during stair climbing under three conditions: barefoot, using half of high-heeled shoe stepping area, and using the total of high-heeled shoe stepping area. Barefoot, half of high heeled shoe, and total of high-heeled shoe were used to evaluate the effects of different areas of the foot or high heels touching the stairs. Results : Both muscles showed significant activity differences among the three stair climbing conditions. Gastrocnemius activity was significantly different between the high-heeled shoe conditions (p= .032), and tibialis anterior activity was significantly different between barefoot stair climbing and climbing with half of the high-heeled shoe stepping area (p= .021). Conclusion : The stepping area increased as heel size increased, thus increasing excessive gastrocnemius and tibialis anterior activity to control excessive ankle joint movement. We infer that using half of the high-heeled shoe stepping area prevents muscle fatigue by reducing excessive leg and ankle muscle activation.

• Resources Recycling
• /
• v.29 no.1
• /
• pp.25-34
• /
• 2020

Electrochemical Quartz Crystal microbalance is a tool that is capable of measuring nanogram-scale mass change on electrode surface. When applying alternating voltage to the quartz crystal with metal electrode formed on both sides, a resonant frequency by inverse piezoelectric effect depends on its thickness. The resonant frequency changes sensitively by mass change on its electrode surface; frequency increase with metal dissolution and decrease with metal deposition on the electrode surface. The relationship between resonant frequency and mass change is shown by Sauerbrey equation so that the mass change during metal dissolution can be measured in real time. Especially, it is effective in the case of reaction mechanism and rate studies accompanied by precipitation, volatilization, compound formation, etc. resulting in difficulties on ex-situ AA or ICP analysis. However, it should be carefully considered during EQCM experiments that temperature, viscosity, and hydraulic pressure of solution, and stress and surface roughness can affect on the resonant frequency. Application of EQCM was shown as a case study on leaching of platinum using aqueous chlorine for obtaining activation energy. A platinum electrode of quartz crystal oscillator with 1000 Å thickness exposed to solution was used as leaching sample. Electrogenerated chlorine as oxidant was purged and its concentration was controlled in hydrochloric acid solution. From the experimental results, platinum dissolution by chlorine is chemical reaction control with activation energy of 83.5 kJ/mol.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.33 no.3
• /
• pp.97-103
• /
• 2023

Barrier films for transparent packaging materials with excellent moisture barrier properties are prepared, utilizing a nanoclay dispersion coating layer formed after a pretreatment process of plasma activation surface treatment process under vacuum at room temperature. Attention is paid on optimizing the coupling additive through the appropriate crosslinking process and optimal dispersion process of the coating process to enhance adhesion. Analysis of the functional coating thin film shows that the water vapor transmission rate is less than 10 g/m²/24 hrs (ASTM F-1249) and the oxygen transmission rate is less than 30 cc/m²/24 hrs (ASTM D3985). It is shown that water barrier properties of coating thin film prepared in this study are greater than conventional untreated films by 10 times or more. The thickness of the transparent gas barrier film is within 0.1 mm, and the transparent gas barrier complex is implemented in two layers. In the study of PET thin film interface characteristics, FT-IR experimental analysis shows the reaction activity was optimized at RDS 1.125 %.

• 한국체육학회지인문사회과학편
• /
• v.54 no.1
• /
• pp.505-514
• /
• 2015

The purpose of this study was to examine the muscle activation in trunk and low-limbs muscle during squat exercise on various instability surface. 10 subject performed squat with 75% of 1 repetition maximum (1RM) on a stable floor, stability blue, stability black and BOSU. Electromyographic (EMG) activity was measured trunk muscle such as rectus abdomina (RA), external obliques (EO), internal obliques (IO), multifidus (MF), and low-limbs muscle such as gluteus maximus (GMA), gluteus medius (GME), biceps femoris (BF), rectus femoris (RF), vastus medialis oblique (VMO), vastus lateral oblique (VLO), medialis gastrocnemius (MG), lateral gastrocnemius (LG), soleus (SOL) and anterior tibia (AT) when ascending and descending squat phase. One-way ANOVA repeated measure with Sheffe used to compare the muscle activity on the stable and unstable surface. Squat with BOSU ball induces higher muscle activity of IO, MF, GMA and GME compared with stability and stability blue and blackduring descending motion. Squat with BOSU ball induces higher muscle activity of GMA compared with stability and stability blue and blackduring ascending motion. This results suggested that BOSU ball in the squat could be effective increasing of trunk stability and gluteal muscle activity. However, there was no difference of squat on low-limb muscle with or without instability.

• Journal of the Korean institute of surface engineering
• /
• v.54 no.1
• /
• pp.1-11
• /
• 2021

Porous dendrite structure AuCu alloy was formed using a hydrogen bubble template (HBT) technique by electroplating to improve the catalytic performance of gold, known as an excellent oxygen reduction reaction (ORR) catalyst in alkaline medium. The rich Au surface was maximized by selectively electrochemical etching Cu on the AuCu dendrite surface well formed in a leaf shape. The catalytic activity is mainly due to the synergistic effect of Au and Cu existing on the surface and inside of the particle. Au helps desorption of OH- and Cu contributes to the activation of O2 molecule. Therefore, the porous AuCu dendrite alloy catalyst showed markedly improved catalytic activity compared to the monometallic system. The porous structure AuCu formed by the hydrogen bubble template was able to control the size of the pores according to the formation time and applied current. In addition, the Au-rich surface area increased by selectively removing Cu through electrochemical etching was measured using an electrochemical calculation method (ECSA). The results of this study suggest that the alloying of porous AuCu dendrites and selective Cu dissolution treatment induces an internal alloying effect and a large specific surface area to improve catalyst performance.