• 대한물리치료과학회지
• /
• 제17권1_2호
• /
• pp.23-32
• /
• 2010

Purpose: The purpose of this study was to investigate trunk and gluteal muscle activation during one-leg standing or two-leg standing with lumbar stabilizing taping using non-elastic tape. Method: The subjects of this study were twenty subjects(man=11, women=9) who be in good physical health and have not problem to back muscle and one leg standing. The surface electromyographic(EMG) data were recorded on external oblique(EO), gluteus medius(GMed), gluteus maximus(GMax), quadratus lumborum(QL) while pre- and post-lumbar stabilizing taping in two-leg standing and one-leg standing. The analysis of data was performed using the paired samples t-test to compare the difference of EMG activity of pre and post lumbar stabilizing taping. Result: Contrast of pre-lumbar stabilizing taping the muscle activity of QL in post-lumbar stabilizing taping is significant decrease on two-leg standing posture(p<.05), and the muscle activity of GMed is significant increase on one-leg standing posture(p<.05). Thus, we suggest that lumbar stabilizing taping using by functional tape will be able to affect on lumbar stability and gluteal muscle retraining.

• 한국분말재료학회지
• /
• 제12권6호
• /
• pp.433-440
• /
• 2005

The hydrogen sorption speed of $Zr_{57}V_{36}Fe_7$ nanocrystalline and amorphous alloys was evaluated at room temperature. Nanocrystalline alloys of $Zr_{57}V_{36}Fe_7$ were prepared by planetary ball milling. The hydrogen sorption speed of nanocrystalline alloys was higher than that of the amorphous alloy. The enhanced sorption speed of nanocrystalline alloys was explained in terms of surface oxygen stability which has been known to retard the activation of amorphous alloys. The retardation can be reduced by formation of nanocrystals, which results in the observed increase in sorption properties.

• 한국운동역학회지
• /
• 제16권3호
• /
• pp.75-83
• /
• 2006

The purpose of this study was to investigate steady-state force depression following active muscle shortening in human tibialis anterior muscle during voluntary contractions. Subjects (n = 7; age $24{\sim}39$ years; 7 males) performed isometric reference contractions and isometric-shortening-isometric contractions, using maximal voluntary effort. Force depression was assessed by comparing the steady-state isometric torque produced following active muscle shortening with the purely isometric reference torque obtained at the corresponding joint angle. In order to test for effects of the shortening conditions on the steady-state force depression, the speed of shortening were changed systematically in a random order but balanced design. Ankle dorsiflexion torque and joint angle were continuously measured using a dynamometer. During voluntary contractions, muscle activation of the tibialis anterior and the medical gastrocnemius was recorded using surface electromyography. Force depression during voluntary contractions, with a constant level of muscle activation, was 12 %, on average over all subjects. Force depression was independent of the speeds of shortening ($13.8{\pm}2.9%$, $10.3{\pm}2.6%$ for 15 and 45 deg/sec over 15 deg of shortening, respectively). The results of this study suggest that steady-state force depression is a basic property of voluntarily-contracting human skeletal muscle and has functional implication to human movements.

• 마이크로전자및패키징학회지
• /
• 제11권2호
• /
• pp.11-16
• /
• 2004

전자칩의 고집적화에 의해 전자기기들은 점점 소형화 되어가고 있으며, 이들 기기들에서 발생되는 열은 기기의 성능 저하뿐 아니라 수명을 단축시킨다. 본 연구에서는 효율적인 방열 위한 마이크로 히트싱크 제조를 위하여 멤브레인에 금속(금, 니켈, 구리)은 도금하는 무전해 도금 방법을 이용하였다. 무전해 도금은 폴리카보네이트 멤브레인을 sensitization과 activation 등의 전처리 후, 도금하고자 하는 금속염 수용액에 침적시켜 실행하였다. 무전해 도금에 의하여 제조된 각각의 마이크로피브릴의 열전달 특성과 방열량은 표면적이 가장 큰 니켈 마이크로피브릴에서 가장 우수하게 나타났다.

• Carbon letters
• /
• 제10권3호
• /
• pp.181-189
• /
• 2009

Activated carbon spheres (ACS) were prepared at different heating rates by carbonization of the resole-type phenolic beads (PB) at $950^{\circ}C$ in $N_2$ atmosphere followed by activation of the resultant char at different temperatures for 5 h in $CO_2$ atmosphere. Influence of heating rate on porosity and temperature on carbon structure and porosity of ACS were investigated. Effect of heating rate and temperature on porosity of ACS was also studied from adsorption isotherms of nitrogen at 77 K using BET method. The results revealed that ACS have exhibited a BET surface area and pore volume greater than $2260\;m^2/g$ and $1.63\;cm^3/g$ respectively. The structural characteristics variation of ACS with different temperature was studied using Raman spectroscopy. The results exhibited that amount of disorganized carbon affects both the pore structure and adsorption properties of ACS. ACS were also evaluated for structural information using Fourier Transform Infrared (FTIR) Spectroscopy. ACS were evaluated for chemical composition using CHNS analysis. The ACS prepared different temperatures became more carbonaceous material compared to carbonized material. ACS have possessed well-developed pores structure which were verified by Scanning Electron Microscopy (SEM). SEM micrographs also exhibited that ACS have possessed well-developed micro- and meso-pores structure and the pore size of ACS increased with increasing activation temperature.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.13-18
• /
• 2003

Reduced activation ferritic steel, JLF-1 steel (Fe-9Cr-2W-V-Ta), is one of the promising candidate materials for fusion reactor applications. Fracture toughness ($J_IC$) and tensile tests were carried out at room temperature and elevated temperature ($400^{\circ}C$). Two types of CT specimen were prepared to examine the effect of rolling direction on the fracture toughness of JLF-1 steel. Four types of tensile specimen were also prepared to investigate the property by the rolling direction and welding. The Micro Vickers hardness was measured at various distances of a cross section of the TIG joints of JLF-1 steel according to the heating history of each position. Finally, the fracture surface was observed by scanning electron microscopy (SEM).

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.622-627
• /
• 2003

A numerical study is made of a flow in a cylinder with a rotating grooved endwall disk. The aim is to describe differences in the flow fields when there is concentrically-grooved obstacle characterized by amplitude(a) and wave number(N). The Reynolds number(Re) is varied from $10^{3}$ to $10^{4}$ and the aspect ratio(Ar) fixed to 1.0 for the most part of the simulation. For the various cases of amplitude(a) and wave number(N), numerical results are acquired. As the endwall groove roughness increases until certain limit, the interior azimuthal velocity component(v) increases drastically. But over the limit, the swirl motion chararcterized by velocity v decreases and finally it approaches much alike Ar=1.0-a case. The reason of activating swirl motion is based on increasing of torque transported by endwall disk. Torque coefficients($C_{T}$) are aquired for the various (a,N,Re) combinations and the limiting phenomena of swirl motion activation is explained.

• 한국연소학회지
• /
• 제14권2호
• /
• pp.1-9
• /
• 2009

New way to effectively capture $CO_2$ in coal fired power plant is the combustion of coal using oxy-fuel technology. Combustion characteristics of Minco sub-bituminous coal at oxy-fuel conditions using TGA and drop tube furnace (DTF) were included activation energy about the char burnout, volatile yield and combustion efficiency of raw coal, the porosity of pyrolyzed char and fusion temperature of by-product ash. TGA result shows that the effect of $CO_2$ on combustion kinetics reduces activation energy by approximately 7 kJ/mol at air oxygen level(21% $O_2$) and decreases the burning time by approximately 16%. The results from DTF indicated similar combustion efficiency under $O_2/CO_2$ and $O_2/N_2$ atmospheres for equivalent $O_2$ concentration whereas high combustion efficiency under $O_2/N_2$ than $O_2/CO_2$ was obtained for high temperature of more than $1,100^{\circ}C$. Overall coal burning rate under $O_2/CO_2$ is decreased due to the lower rate of oxygen diffusion into coal surface through the $CO_2$ rich boundary layer. By-product ash produced under $O_2/CO_2$ and $O_2/N_2$ was similar IDT in irrelevant to $O_2$ concentration and atmospheres gas during the coal combustion.

• Journal of Chest Surgery
• /
• 제19권4호
• /
• pp.558-562
• /
• 1986

The extracorporeal circulation has been much improved recently, but has yet much complex problems such as the protein denaturation and the activation of the complement system by the exposure of the blood to the foreign surface, which may result in such as the postperfusion syndrome. We studied the changes of the plasma protein fractions by the electrophoresis and the complement consumption [C3, C4] by the immunodiffusion method in the patients undergoing cardiac operation from Mar. 1, 1986 to Aug. 31, 1986. The results were summarized as follows: 1. y-globulin fraction was decreased [p<0.02 by paired t-test, N=25], but a,-globulin was increased [p<0.001 by paired t test, N=25] after operation. 2. C3,C4 were significantly reduced [p<0.001 by paired t-test, N=14] postoperatively and normalized from 24 hours after operation. 3. The consumption of C3,C4 had significant linear correlation [correlation coefficient r=0.97] and C, was more markedly reduced comparing with C3, which probably means the complement activation by classical pathway in our bubble oxygenator group.

• 대한수의학회지
• /
• 제53권3호
• /
• pp.143-147
• /
• 2013

Ginsenoside Rp1 is one of ginseng saponins with chemotherapeutic activity. In this study, we investigated the effects of Rp1 on spleen cells. Spleen is a major immune organ consisted of crucial immune cells, such as T lymphocytes, B lymphocytes, natural killer cells, and some antigen-presenting cells. Although the anti-tumor potential of Rp1 was studied, the effects of Rp1 on immune cells have not investigated yet. A viability assay using 3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyltetrazolium bromide (MTT), flow cytometric analysis, Western blot analysis were used to detect cellular changes on Rp1-treated spleen cells. MTT assay showed that Rp1 decreased the viability of spleen cells. To further investigate the effects of Rp1 on activated spleen cells, we treated lipopolysaccharide (LPS) as a representative inflammatory agent and Rp1 on spleen cells in a combination. The surface expression levels of activation markers for lymphocytes, CD25 and CD69 were measured. Apoptotic analysis revealed the cytotoxic effects of Rp1 on both na$\ddot{i}$ve and activated cells, and the expression pattern of some apoptosis-related proteins was correlated to apoptotic events of cells. Taken together, ginsenoside Rp1 increases the cellular death of spleen cells and also inhibits the LPS-induced activation of spleen cells.