• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 추계학술대회 논문집
• /
• pp.376-380
• /
• 2009

Surface acoustic wave (SAW) device is widely used as a bandpass filter, a chemical or physical sensor, and an actuator. In this paper, we propose the capacitive gap measurement system with high precision through the signal processing using SAW device. The research process is mainly composed of theoretical part and experimental part. In theoretical part, equivalent circuit model was used to simulate the SAW response by the change of capacitance. In experimental part, commercialized capacitor was used to see the SAW response by the change of load capacitance. After that, gap adjustment system was made physically and the SAW response by the change of gap which caused the capacitance change was measured. And resolution and stroke was decided comparing the signal change and basic measurement noise level.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(2)
• /
• pp.5-8
• /
• 2000

This paper proposes GaN film as a piezoelectric material for SAW(surface acoustic wave) filters. The fabricated GaN SAW filter exhibited a very high velocity of 5800 ㎧and relatively low insertion loss of -9.9 dB without matching circuit. From Smith's equivalent circuit model, the calculated electromechanical coupling factor (K$^2$) was about 4.$\pm$03％. which is larger than those obtained from other thin film piezoelectric materials and allows the realization of wider filter fractional bandwidths.

• 전기의세계
• /
• 제31권2호
• /
• pp.141-146
• /
• 1982

In this paper, surface acoustic wave (SAW) bandpass filter is designed using the Fourier series approach and the I$_{0}$-shin window function. And also we studied a method to realize SAW filter using the apodized ID transducer which was fabricated with aluminum metallization of about 1500 A over .deg. thickness on Y-cut Z-propagating LiNbO$_{3}$, crystal by photolithographic technique (lift-off method). Experimental results on SAW bandpass filter responses show good agreements with the theoretical characteristics.s.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.173-176
• /
• 1999

Frequency responses of the surface acoustic wave(SAW) filters are simulated by using the impulse modeling. The simulation technique of the SAW filters is to use the Fourier transformation to make a correspondence between the impulse response of the filter and the taps in the delay line. Since the Fourier series must be truncated after a finite number of terms, window functions are often used to weight the coefficients to obtain the desirable side-lobe level and bandwidth. The filter design is operated through the iterative simulation procedures. The design process is capable of yielding filters with optimized frequency response characteristics.

• 한국정보통신학회논문지
• /
• 제26권7호
• /
• pp.1032-1039
• /
• 2022

이동통신 중계기에 사용하는 SAW(Surface Acoustic Wave) 방식의 대역통과필터를 대체할 수 있는 5G 이동통신 중계기용 군 지연 특성이 개선된 크로스 커플링 등화기 구조를 결합한 캐비티 대역통과필터를 설계하고 이를 구현하였다. 3D EM 시뮬레이션 툴 (HFSS)을 이용하여 공진 주파수, 공진기 간 결합 계수와 공진기 사이 외부 품질 계수를 계산하였고, 이를 바탕으로 메탈 캐비티 구조로 주파수대역 3500MHz~3600MHz, 대역폭 97.85MHz로 대역 양쪽 가장자리 주파수(edge)단에서 20dB 이상의 감쇄 특성을 가지도록 12차 대역 통과 필터를 제작 하였다. 설계 제작한 대역통과필터는 5G 이동통신 표준에 요구하는 군 지연 시간 조건과 인-밴드, 아웃-밴드 주파수 응답을 만족하였다.

• 한국세라믹학회지
• /
• 제40권4호
• /
• pp.393-397
• /
• 2003

To investigate the effect of AIN c-axis orientation on the resonance performance of film bulk acoustic wave resonators, solidly mounted resonators with crybtallographically different AIN piezoelectric films were prepared by changing only the bottom electrode surface conditions. As increasing the degree of c-axis texturing, the effective electromechanical coupling coefficient ($\kappa$$\_$eff/)$^2$ in resonators increased gradually. The least 4 degree of full width at half maximum in an AIN(002) rocking curve, which corresponds to $\kappa$$^2$$\_$eff/ of above 5%, was measured to be necessary for band pass filter applications in wireless communication system. The longitudinal acoustic wave velocity of AIN films varied with the degree of c-axis texturing. The velocity of highly c-axis textured AIN film was extracted to be about 10200 n/s by mathematical analysis using Matlab.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제51권12호
• /
• pp.597-600
• /
• 2002

Film Bulk Acoustic wave Resonator (FBAR) using thin piezoelectric films can be made as monolithic integrated devices with compatibility to semiconductor process, leading to small size and low cost, high Q RF circuit elements with wide applications in communications area. This paper presents a MMIC compatible suspended FBAR using surface micromachining. Membrane is composed $Si_3N_4SiO_2Si _3N_4$ multi layer and air gap is about 50${\mu}{\textrm}{m}$. Firstly, We perform one dimensional simulation applying transmission line theorem to verify resonance characteristic of the FBAR. Process of the FBAR is used MEMS technology. Fabricated FBAR resonate at 2.4GHz, $K^2_{eff}$ and Q are 4.1% and 1100.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1991년도 추계학술대회 논문집
• /
• pp.68-72
• /
• 1991

In this study, to improve temperature stability 0.05 Pb(Sn$\_$$\frac{1}{2}$/Sb$\_$$\frac{1}{2}$/O$_3$ - 0.35PbTiO$_3$ - 0.60PbZrO$_3$ + 0.4[wt%]MnO$_2$ piezoelctric oeramics of low dielectric constant and large mechanical quality factor were manufactured with the addition of Cr$_2$O$_3$by Hot Press method. And the SAW delay line was fabricated and the propagation characteristics of SAW was investigated, and the SAW filter was fabricated on C4 added by 0.2[wt%] Cr$_2$O$_3$and its frequency characteristics was investigated. The specimen, whose propagation characteristics of surface acoustic wave were the best, was C4 added by 0.2[wt%] Cr$_2$O$_3$, and its electromechanical coupling factor(ks$^2$) was 3.11[%] and its temperature coefficient of the center frequency (C$\_$fo/) was -21.27[ppm/$^{\circ}C$]. The 31[MHz] SAW IF filter of C4 scarcely had diffraction phenomena and its group delay time was 1.4673 ${\pm}$40[ns] in the pass band, and the insertion loss was -24.419[dB] on no impedance matching.

• 한국정보통신학회논문지
• /
• 제11권8호
• /
• pp.1589-1595
• /
• 2007

현재의 통신 시스템은 멀티미디어 서비스를 제공하기 위하여 OFDM(Orthogonal Frequency Division Multiplexing) 방식이 주로 쓰이고 있다. 그러나 OFDM 방식은 다수의 부반송파를 사용하므로 부반송파들이 동일위상으로 더해질 때 놀아지는 PAPR(Peak-to-Average Power Ratio)이 문제가 되고 있다. PAPR의 문제는 신호가 전력증폭기와 같은 비선형 소자를 통과할 때 심각한 왜곡을 받게 되므로 전송시스템 성능이 저하된다. 본 논문에서는 PAPR 문제를 해결하기 위해 IF-Clipping 기법을 제안하고, 신호의 clipping에 의해 발생되는 신호의 왜곡을 SAW(Solace Acoustic Wave) 필터와 전력증폭기를 사용하여 제한하였다. 또한 clipping 기법 이용 후 SAW Filter와 전력증폭기를 사용하여 WiBro 시스템의 Spectrum Mask를 만족하는 이상적인 파라메터 값(PAPR, Backoff)을 찾았다.

• Ocean Systems Engineering
• /
• 제9권4호
• /
• pp.391-407
• /
• 2019

Tracking the location (position) of a surface or underwater marine vehicle is important as part of guidance and navigation. While the Global Positioning System (GPS) works well in an open sea environment but its use is limited whenever testing scaled-down models of such vehicles in the laboratory environment. This paper presents the design, development and implementation of a low energy ultrasonic augmented single beacon-based localization technique suitable for such requirements. The strategy consists of applying Extended Kalman Filter (EKF) to achieve location tracking from basic dynamic distance measurements of the moving model from a fixed beacon, while on-board motion sensor measures heading angle and velocity. Iterative application of the Extended Kalman Filter yields x and y co-ordinate positions of the moving model. Tests performed on a free-running ship model in a wave basin facility of dimension 30 m by 30 m by 3 m water depth validate the proposed model. The test results show quick convergence with an error of few centimeters in the estimated position of the ship model. The proposed technique has application in the real field scenario by replacing the ultrasonic sensor with industrial grade long range acoustic modem. As compared with the existing systems such as LBL, SBL, USBL and others localization techniques, the proposed technique can save deployment cost and also cut the cost on number of acoustic modems involved.