• Asian-Australasian Journal of Animal Sciences
• /
• v.10 no.5
• /
• pp.478-483
• /
• 1997

Six adult female Murrah buffaloes of about 12 years were exposed to solar radiation during summer when minimum and maximum ambient temperatures were 27.1 and $44.1^{\circ}C$, respectively. The skin surface temperature at forehead, middle pinna, neck, rump, foreleg, hind legs were recorded using non-contact temperature measuring instrument and respiration rate and rectal temperature were measured throughout the 24 hours starting from 6:30 AM. The diurnal fluctuations and temperature gradients have been reported for buffaloes. During summer when ambient temperature and solar radiation was maximum, adult buffaloes were not able to maintain their thermal balance even after increasing the pulmonary frequency 5 - 6 times. The changes in skin temperature at various sites indicate that the temperature of skin surface not only varies in relation to exposure but also due to water diffusion and evaporation.

• Proceedings of KOSOMES biannual meeting
• /
• 2018.06a
• /
• pp.132-132
• /
• 2018

• Journal of Wetlands Research
• /
• v.3 no.1
• /
• pp.61-73
• /
• 2001

This study was performed to survey the characteristics of surface water and soil in Wangdungjae wetland located at Chiri-Mountain. The results of survey summarized as follows; 1. The physico-chemical characteristics of surface water such as pH, temperature, and DO were in the range of 6.02-6.39, $13.5-24.3^{\circ}C$ and 3.81-9.97 mg/L, respectively. Also, the organic concentrations such as BOD and COD were in the range of 1.3-1.61 mg/L and 3.55-9.97 mg/L, respectively. The water quality of five different sampling sites showed the similar characteristics. 2. The physico- chemical characteristics of soil showed the different properties with the soil sampling depth. According to increasing sampling depth, cation exchange capacity (CEC) and electric conductivity (EC) increased but pH decreased. 3. The future survey and researches on surface water and soil environments are needed to preserve the Wangdungjae wetland at Chiri-mountain marsh.

• Environmental and Resource Economics Review
• /
• v.19 no.4
• /
• pp.897-914
• /
• 2010

The translog cost function of Korean Walleye pollock fishery is used to examine the impact of surface water temperature change led by global climate change. Catched of walleye pollock are very sensitive to water temperature and material cost. Elasticities of production to water temperature are -9%, significantly lower than we expected. There may be alternative explanations for the productivity decrease, including the possibility of overfishing and water pollution. However, the impact of climate change is obvious and inevitable. Therefore the government may encourage local fishermen to change from current cold water to warm water fisheries. Moreover continuos monitoring for the possibility of illegal activities at the East Sea. Finally, collaborated political efforts may be needed among the nations in the East Sea to conserve a Walleye Pollock fishery.

• Journal of the Korean Wood Science and Technology
• /
• v.23 no.3
• /
• pp.16-22
• /
• 1995

The profiles of the heating temperature in three water vat temperatures (55, 66 and 77$^{\circ}C$) and the cooling temperature under the average ambient temperature of 3$^{\circ}C$ in 4 and 10cm depths from surface at the center of veneer bolts length showed similar patterns for Japanese larch (Larix leptolepis). Dahurian larch (Larix gmelinei) and Radiata pine (Pinus radiata). The difference of these core temperatures of 10cm depth from surface varied proportionally with the increase of vat temperatures. The average heating time based on final core temperature of 6$^{\circ}C$ lower than vat temperature required about 14.5 hours in vat temperature of 55$^{\circ}C$ and 13.5 hours in vat temperature of 66and 77$^{\circ}C$. Each internal temperature of 4 and 10cm depths from surface started to decrease from the beginning of cooling and after about two hours.

• Fashion & Textile Research Journal
• /
• v.19 no.5
• /
• pp.646-652
• /
• 2017

In order to clarify an availability of water treatment for persimmon extract dyeing, effect of color developing by water treatment process on cotton fabrics dyed with persimmon extract was investigated. Dyed fabrics were dipped still water and circulation water in various temperature. Concerning water color developing, still water color developing and circulation water color developing have been examined, and the temperature of water has been apprehended to prepare an effective basis of water color development. The surface color based on circulation water color development displays low values of $a^{\ast}$ and $b^{\ast}$, and the range of the c value(Munsell chroma) is narrow and has the value of 2 to 3, thus displays the coloration of a dark tone. The effect of temperature in water color development was insignificant, due to the small difference in temperature from $20^{\circ}C$ to $40^{\circ}C$. At $80^{\circ}C$, remarkable color development manifested, which is evidence of the high influence of temperature. The effects of circulation were clear at low temperatures, and the effects of temperature highly manifested at high temperatures. Circulation water color development display great color development at all temperatures to allow industrial color development with the absence of sunlight, thereby having an effect of energy reduction and developing color in dark tones, however this also is a strength of persimmon extract concerning color diversification, and is judged to have great value of industrial and practical application.

• Environmental Engineering Research
• /
• v.15 no.1
• /
• pp.41-48
• /
• 2010

This paper describes the influence of nutrient salts eluted from the bottom of a closed water area where polluted sediment has been deposited by inflowing river water. The elution pattern was monitored at our experimental facility. Both the sediment pore water and water above the bottom were sampled using a dialyzer sampler (peeper). The pore water of the eutrophicated sediment contained a large amount of nutrient salts, and the effect of elution was confined to a limited area of the bottom surface. The nutrient concentration of the sediment pore water was closely related to both the water temperature and dissolved oxygen (DO) concentration. The eluted nutrients from the sediment provided a source for phytoplankton and algae growth. This experimental data indicated that the water quality of the surface was not directly connected to the eluted nutrient salts, while it was indirectly affected by the total ecosystem, including all the organisms within an area and their environment.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.10 no.3
• /
• pp.138-146
• /
• 2002

The phenomena of energy separation in vortex tubes was investigated experimentally to see the subsidiary effect of the conductivity of tube material and cooling conditions around the outer surface of the tube. The experiment was carried out with pyrex, stainless steel and copper tubes, and the heat transfer conditions of the tubes were with insulation, without in-sulation and water cooling modes respectively The results were obtained that the hot exit fluid temperature was highly affected by a change of conductivity of a tube when the outer surface was cooled by the water, while the working fluid through the tubes was air. How-ever, the cold exit temperature was little affected by the heat transfer modes on the outer surface of the vortex tube.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.7
• /
• pp.79-90
• /
• 1999

This investigation presents the experimental results of forced convection boiling heat transfer around a circular, electrically heated horizontal cylinder to subcooled water in cross flow. In these experiments, the following primary variables were included: heat flux, flow velocity, pressure and degree of subcooling at inlet. Local surface temperatures were measured at nine peripheral positions. Local surface temperature distributions are classified into four categories depending on the supplied heat flux. The effects of the boiling curve depending on the fluid velocity, degree of subcooling at inlet and pressure are presented.

• Journal of Mechanical Science and Technology
• /
• v.18 no.7
• /
• pp.1140-1149
• /
• 2004

The absorption characteristics of water vapor into a LiBr-H$_2$O solution flowing down on finned inclined surfaces are numerically investigated in order to study the absorbing performances of different surface shapes of finned tubes as an absorber element. A three-dimensional numerical model is developed. The momentum, energy, and diffusion equations are solved simultaneously using a finite difference method. In order to obtain the temperature and concentration distributions, the Runge-Kutta and the Successive over relaxation methods are used. The flat, circular, elliptic, and parabolic shapes of the tube surfaces are considered in order to find the optimal surface shapes for absorption. In addition, the effects of the fin intervals and Reynolds numbers are studied. The results show that the absorption mainly happens near the fin tip due to the temperature and concentration gradient, and the absorbing performance of the parabolic surface is better than those of the other surfaces.