• Nuclear Engineering and Technology
• /
• 제44권7호
• /
• pp.773-780
• /
• 2012

The article presented is concerned with an evaluation of the corrosion behavior of SA-508 low alloy steel (LAS) and Type 309L stainless steel (SS) cladding of a reactor pressure vessel under the simulated primary water chemistry of a pressurized water reactor (PWR). The uniform corrosion and galvanic corrosion rates of SA-508 LAS and Type 309L SS were measured in three different control conditions: power operation, shutdown, and power operation followed by shutdown. In all conditions, the dissimilar metal coupling of SA-508 LAS and Type 309L SS exhibited higher corrosion rates than the SA-508 base metal itself due to severe galvanic corrosion near the cladding interface, while the corrosion of Type 309L in the primary water environment was minimal. The galvanic corrosion rate of the SA-508 LAS and Type 309L SS couple measured under the simulated power operation condition was much lower than that measured in the simulated shutdown condition due to the formation of magnetite on the metal surface in a reducing environment. Based on the experimental results, the corrosion rate of SA-508 LAS clad with Type 309L SS was estimated as a function of operating cycle simulated for a typical PWR.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.230-232
• /
• 2006

Failure behaviors of thin cylinder with corrosion are very important for the integrity of boiler and pressure vessel system. In this study, FEM with internal pressure are conducted on 1000 mm diameter (length 3000 mm and thickness, 5.9 mm) SS400 carbon steel. Failure behaviors of locally wall thinned cylinders were calculated by elasto-plastic analysis using finite element method. The elasto-plastic analysis was performed by FE code ANSYS. We simulated various types of local wall thinning that can be occurred at cylinder surface due to corrosion. Locally wall thinned shapes were machined to be different in size along the circumferential or axial direction of straight cylinder. In case of local wall thinned length 30 mm, internal pressure, when the crack initiation and the plastic collapse occur, didn't decrease dramatically even though local wall thinned depth was deep. In 400 mm, the more local wall thinned depth is deep, the more internal pressure decreased dramatically. In degraded materials, crack is easily initiation but plastic collapse was difficult.

• Nuclear Engineering and Technology
• /
• 제45권1호
• /
• pp.21-28
• /
• 2013

The flow and heat transfer characteristics of the ex-vessel core melt (corium) were investigated using a commercial CFD code along with the experimental data on the spreading of corium available in the literature (VULCANO VE-U7 test). In the numerical simulation of the unsteady two-phase flow, the volume-of-fluid model was applied for the spreading and interfacial surface formation of corium with the surrounding air. The effects of the key parameters were evaluated for the corium spreading, including the radiation, decay heat, temperature-dependent viscosity and initial temperature of corium. The results showed a reasonable trend of corium progression influenced by the changes in the radiation, decay heat, temperature-dependent viscosity and initial temperature of corium. The modeling of the viscosity appropriate for corium and the radiative heat transfer was critical, since the front progression and temperature profiles were strongly dependent on the models. Further development is required for the code to consider the formation of crust on the surfaces of corium and the interaction with the substrate.

• 한국해양공학회지
• /
• 제20권2호
• /
• pp.66-71
• /
• 2006

To develope a hull form of catamaran type dredging vessel, resistance characteristics is investigated to find the interaction effect of waves between the two hulls. Re fore body shape is simplified as two dimensional wedge shape for the maintenance and disassembly/assembly. Based on MAC method, numerical simulation is performed in staggered variable mesh system. Re conservation form of Euler equations and continuity equation are applied as governing equations. To verify numerical methods, the wive patterns along the hull surface are compared with the results of model tests. This study is performed as varying wedge shape of the bow and the distance between the two hulls. The wave interaction between two hulls are observed to investigate the relation the resistance performance and the flow characteristics. Suitable hull form and distance between two hulls are discussed.

• 한국자동차공학회논문집
• /
• 제3권5호
• /
• pp.64-73
• /
• 1995

A numerical simulation of heat and fluid flow for predicting the effect of passage arrangement in automotive heat battery has been performed. The system is assumed to be a two-dimensional laminar flow and isothermal boundary is applied to the surface of the latent heat storage vessel. In the case of ideal heat battery the flow rate into each flow passage is evenly distributed. The various models are considered in the view of pressure drop and bulk temperature. The effects on the efficiency of the heat battery are examined by varying geometrical factors such as flow passage clearance, length of a inlet and outlet tank and the length of a latent heat storage vessel. The flow clearance is a very important -factor on the efficiency of a heat battery. As the flow passage clearance becomes narrow, the flow distribution becomes uniform and the bulk temperature increases, however the pressure drop is large. Therefore, optimal flow passage clearance has to be chosen. The present work can be used in optimizing heat battery efficiency.

• Korean Journal of Acupuncture
• /
• 제28권1호
• /
• pp.125-137
• /
• 2011

Objectives : The Primo system is a hypothesis on the new circulation system. It orginates from Bonghan theory. Bonghan theory is about the anatomical substance of acupuncture point and meridian system. It has been regarded as a misunderstanding of the lymphatic system or as a made-up story for the past 40 years. Since 2002, many studies have been published either to support the theory or to refute the old viewpoint. But there are still difficulties about the proper sampling. The purpose of this study is to find out the discriminative criteria of Organ Surface Primo sytem by reviewing the Kim Bonghan's publications. Methods : Abstract of description about the Organ Surface Primo system in 5 publications of Kim Bonghan are weighted by the reverse order of publication. Results and Conclusions : 6 characters of anatomical structure and 11 characters of histological structure are founded as repeated descriptions. We hope that this summarized characteristics would be a good guide to Primo system experiments.

• 대한조선학회논문집
• /
• 제59권5호
• /
• pp.252-261
• /
• 2022

The present study concerns assessing the operability of a surface combatant, based on the Percent-Time-Operable (PTO). For validation of the seakeeping analysis in the regular waves, the model test is first conducted in a towing tank. The seakeeping analysis results in the regular waves are expanded to the irregular waves, considering the wave spectra around the Korean peninsula and in North Pacific. The seakeeping criteria of the surface combatant in transit, combat, replenishment operation, and survival condition are defined by the literature review. An annual operation scenario of the surface combatant in two operation areas, i.e., advance speed and wave direction, are combined with the seakeeping analysis results to assess PTO. The main constraints of operability of the surface combatant are identified as the pitch angle and vertical velocity at the helicopter deck.

• Korean Chemical Engineering Research
• /
• 제51권2호
• /
• pp.250-256
• /
• 2013

휘발유는 온도 및 햇빛 노출 등의 저장환경에 따라 산화에 의해 유기산 및 중축합 고분자 물질(검질)이 생성되어 금속재료의 부식과 고무수지 등의 열화 및 연료공급 시스템의 축적물로 남아 차량 문제를 유발시킬 수 있다. 최근에 LPG와 휘발유 겸용 차량에서 장기간 사용하지 않은 휘발유가 차량문제를 유발하거나, 옥탄가가 비이상적으로 낮은 연료들이 출현하고 있지만 명확한 원인규명이 되지 않은 상황이다. 이에, 휘발유의 산화에 대한 명확한 규명을 통해 저장환경, 품질변화 추정 등 관리방안을 제시하고자 하였다. 휘발유의 산화특성 규명을 위해 현재 유통되고 있는 자동차용 휘발유와 향후 보급가능 바이오에탄올 혼합연료(바이오에탄올 10%)에 대해 저장용기(차량 연료탱크, 폴리에틸렌(PE) 재질 및 철재 용기) 별, 저장환경(햇빛 노출(옥상), 햇빛 비노출(창고)), 대기 중 공기노출 등에 대한 산화열화 영향을 산화가 일어나기 쉬운 여름철(6월~10월)에 18주간 저장평가하여 실제 품질기준 항목에 미치는 영향을 분석하였다. 폴리에틸렌(PE) 재질 용기의 경우 마개 틈 또는 표면으로의 고옥탄가 저비점 성분의 증발로 옥탄가의 품질기준이 벗어나는 경우가 있었다. 특히 햇빛 노출의 상태에서는 휘발유 산화와 저비점 성분의 증발로 옥탄가 및 증기압이 급격히 감소하였고, 검(gum)질도 과량 생성되었다. 바이오에탄올 혼합연료도 유사한 결과를 나타내었다.

• 한국산업융합학회 논문집
• /
• 제22권6호
• /
• pp.673-680
• /
• 2019

This study investigates the validity of applying new carbon nanotube (CNT, Carbon Nano Tube) surface heaters, which are applied in combination with various products, to the vessel's materials, and proposes the commercializable products accordingly. In order to actually apply a CNT surface heating system technology to the ship's equipment for the first time in Korea, we carried out the interview of experts in the technology field and the due diligence of the shipyard, and presented the technology road map for the selected three items. Finally, for "Heating System of Ship Fuel Tank" with the highest commercialization potential, we proposed a conceptual diagram to enable the final development of the product through the product analysis.

• Journal of Advanced Marine Engineering and Technology
• /
• 제29권1호
• /
• pp.124-131
• /
• 2005

This paper suggests LOS(Line-Of-Sight) guidance system of a surface vessel in straight-line navigation under ocean currents An LOS vector from the vessel to a point on the path between two way-points is decided and a heading angle is calculated to converge to follow the desired path based on the LOS vector This guidance system is called LOS guidance system. The suggested LOS guidance law has parameters to be properly chosen according to navigational environment. Parameters of LOS guidance system are optimized to reduce propulsive energy and/or position error between desired Position and present position of a ship using genetic algorithm which is a strong optimization algorithm with adaptational random search The effectiveness of the suggested LOS guidance system is assured through computer simulations.