• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1994년도 Proceedings of the Korea Automatic Control Conference, 9th (KACC) ; Taejeon, Korea; 17-20 Oct. 1994
• /
• pp.494-497
• /
• 1994

We propose a novel velocity detection method of moving object based on a speckle pattern on the target surface using a self-mixing laser diode (SMLD). By this measurement, it was confirmed that the speckle signal has its waveform independent of the target velocity, and has its averaged frequency directly proportional to the target velocity. So it will be possible to detect the velocity of the target transversely translating against the laser light beam using a compact measuring system.

• 설비공학논문집
• /
• 제7권3호
• /
• pp.521-527
• /
• 1995

The average particle deposition velocity toward a vertical wafer surface in a vertical airflow chamber was measured by a wafer surface scanner(PMS Model SAS-3600). Polystyrene latex(PSL) spheres with diameters between 0.3 and $0.8{\mu}m$ were used. To examine the effect of the airflow velocity on the deposition velocity, experiments were conducted for three vertical airflow velocities ; 20, 30, 50cm/s. Experimental data of particle deposition velocity were compared with those given by prediction model suggested by Liu and Ahn(1987).

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 봄 학술발표회 논문집
• /
• pp.544-550
• /
• 1997

In this study, the advanced on-sided stress wave velocity measurement method was applied to investigate the effects of composition, age and moisture content in concrete. Two concrete specimens that have different composition were used to figure out the change of the Longitudinal and Surface wave velocity due to different composition. The other concrete specimen was cast and the Longitudinal and Surface wave velocity was monitored during curing process. After 28-day old, the effect of moisture content in the concrete specimen to the stress wave velocity is presented in this paper during the time period 43-74 days after casting. For drying process. an aggregate drying oven was used. A conventional ultrasonic through transmission method was used to compare with the results determined by the one-sided method.

• 상하수도학회지
• /
• 제25권5호
• /
• pp.627-634
• /
• 2011

In the present study, the flow behaviors of square jets surface discharged and submerged discharged into shallow water were each simulated using computational fluid dynamics, and the results were compared. As for the verification of the models, the results of the hydraulic experiment conducted by Sankar, et al. (2009) were used. According to the results of the verification, the present application of computational fluid dynamics to the flow analysis of square jets discharged into shallow water was valid. As for the wall jet, which is one form of submerged discharges, at the bottom wall boundary, the peak velocity of the jet rapidly moved from the center of the jet to the bottom wall boundary due to the restriction of jet entrainment and the no-slip condition of the bottom wall boundary, and, as for the surface discharge, because jet entrainment is limited on the free water surface, the peak velocity of the jet moved from the center of the jet to the free water surface. This is because jet entrainment is restricted at the bottom wall boundary and the surface so that the momentum of the central core of the jet is preserved for considerable time at the bottom wall boundary and the surface. In addition, due to the effect of the bottom wall boundary and the free water surface, the jet discharged into shallow water had a smaller velocity diminution rate near the discharge outlet than did the free jet; at a location where it was so distant from the discharge outlet that the vertical profile of the velocity was nearly equal (b/x =20~30), moreover, it had a far smaller velocity diminution rate than did the free jet due to the effect of the finite depth.

• 한국수자원학회논문집
• /
• 제54권11호
• /
• pp.903-913
• /
• 2021

홍수기 하천에서 유량측정은 예산, 인력, 안전 및 측정 시 편의성 등의 이유로 측정에 제한이 많다. 특히, 태풍 등으로 인한 호우사상 발생 시 위와 같은 문제로 홍수량 측정에 어려움이 따른다. 이러한 문제점을 개선하기 위해 본 연구에서는 드론(Drone)과 전자파표면유속계(Surface velocity doppler radar)의 기능을 조합하여 최소 인력으로 짧은 시간에 간편하고, 안전하게 홍수기에 하천유량을 측정할 수 있는 방법을 개발하였다. 기존 드론을 이용한 유량측정 연구에서 도출된 바람, 강우 등 기상 요인에 의한 드론의 기계적인 한계를 극복하기 위해 본 연구에서는 IP56 등급의 방진·방수 성능, 최대 36 km/h의 풍속에서 안정적인 비행능력과 최대 10 kg을 탑재할 수 있는 드론을 개발하였다. 또한 전자파표면유속계 측정에 있어서 주요 제약 요소인 진동을 제거하기 위해 드론과 전자파표면유속계를 결합하는 댐퍼플레이트를 개발하였다. 이들 비행장비와 유속계를 결합시킨 유속계 DSVM (Dron and Surface Veloctity Meter using doppler radar)을 제작하였으며, 봉황천(금강 제1지류)에 위치한 금산군(황풍교)지점에서 DSVM을 운용하여 홍수량을 측정한 결과 ±3.5%의 오차가 발생하였다. 또한 측정된 표면유속으로부터 평균유속을 산정할 때 정확도 향상을 위해 ADCP를 이용하여 동시 측정하고, 평균유속을 비교하여 평균유속환산계수(0.92)를 산정하였다. 본 연구에서는 드론과 전자파표면유속계를 결합해 측정한 유량과 ADCP 및 봉부자를 이용해 측정한 유량을 비교하고, DSVM의 적용 및 활용 가능성을 확인하였다.

• 한국방재안전학회논문집
• /
• 제16권2호
• /
• pp.15-32
• /
• 2023

홍수 유량측정은 직접 하천에 접촉하는 방식의 경우 측정인력의 안전 문제와 다수의 인력이 필요한 점 등 어려운 점이 많다. 최근 이러한 문제점을 해결하기 위해 현장에서 측정이 간편하고, 수면에 접촉하지 않는 비접촉방식의 전자파표면유속계 활용이 증가하고 있으나 돌발적이고 급변하는 현장 여건의 적용에 있어 어려움이 있다. 따라서, 홍수 상황에서 표면유속을 이용한 유량산정방법은 이론적이고, 경제적인 접근이 필요하다. 본 연구에서는 전자파표면유속계 측정자료와 수위-유량관계곡선식 자료를 수집하여 표면유속을 이용한 지표유속법과 유속분포법을 적용 및 분석하였다. 전반적으로 동수반경 3 m 이상 또는 평균유속 2 ㎧ 이상에서는 모든 방법이 측정유량 및 환산유량과 유사한 결과로 분석되었다. 그리고 대상지점 중 수위-유량관계곡선식 고수위 범위에서 최대유속 발생 위치 구간의 최대 표면유속을 이용하여 지표유속법과 유속분포법으로 유량을 산정하였고, 환산유량과의 평균 상대오차가 모두 10% 이내로 비교적 일치하였다. 홍수시 한 개의 최대 표면유속 측정과 지표유속법 및 유속분포법을 이용한 유량산정방법은 고수위 외삽 개발에 적용할 경우 외삽추정 구간에 대한 신뢰도를 제고할 수 있을 것으로 판단되었다. 따라서, 본 연구결과를 토대로 한 표면유속을 이용한 유량산정방법은 신속하고 효율적인 홍수 유량측정 방안이 될 것으로 기대된다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권4호
• /
• pp.466-475
• /
• 2009

A numerical analysis of reactive flow in a liftoff flame is accomplished to elucidate the characteristics of flame propagation velocity and volume integral of reaction rate with the variation of fuel injection velocity at the fuel rich region, fuel lean region and diffusion flame region. The increase of fuel injection velocity enhances flame propagation velocity, but its effect on the flame propagation velocity is not much greater under 4%. The increase of fuel injection velocity affects directly and linearly on the flame surface area in the fuel rich region and so enhances volume integral of reaction rate to accommodate the increment of fuel.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2005년도 추계학술대회 논문집
• /
• pp.80-84
• /
• 2005

Many important properties in colloidal systems are usually determined by surface charge ($\zeta$-potential) of the contacted solid surface. In this study, $\zeta$-potential of glass $\mu$-channel was evaluated from the electro-osmotic velocity distribution. The electro-osmotic velocity inside a glass $\mu$-channel was measured using a micro-PIV velocity field measurement technique. This evaluation method is more simple and easy to approach, compared with the traditional streaming potential technique. The $\zeta$-potential in the glass $\mu$-channel was measured for two different mole NaCl solutions. The effect of an anion surfactant, sodium dodecyl sulphate (SDS), on the electro-osmotic velocity and $\zeta$-potential in the glass surface was also studied. In the range of $0\∼6$mM, the surfactant SDS was added to NaCl solution in four different mole concentrations. As a result, the addition of SDS increases $\zeta$-potential in the surface of the glass $\mu$-channel. The measured $\zeta$-potential was found to vary from-260 to-70mV. When negatively charged particles were used, the flow direction was opposite compared with that of neutral particles. The $\zeta$-potential has a positive sign for the negative particles.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2007년도 추계학술대회
• /
• pp.149-154
• /
• 2007

This study examines the effect of acoustic excitation using forced coaxial air on the flame characteristics of turbulent hydrogen nonpremixed flames. A resonance frequency was selected to acoustically excite the coaxial air jet due to its ability to effectively amplify the acoustic amplitude and reduce flame length and NOx emissions. Acoustic excitation causes the flame length to decrease by 15 % and consequently, a 25 % reduction in EINOx is achieved, compared to a flame without acoustic excitation. Moreover, acoustic excitation induces periodical fluctuation of the coaxial air velocity, thus resulting in slight fluctuation of the fuel velocity. From phase-lock PIV and OH PLIF measurement, the local flow properties at the flame surface were investigated under acoustic forcing. During flame-vortex interaction in the near field region, the entrainment velocity and the flame surface area increased locally near the vortex. This increase in flame surface area and entrainment velocity is believed to be a crucial factor in reducing flame length and NOx emission in coaxial jet flames with acoustic excitation. Local flame extinction occurred frequently when subjected to an excessive strain rate, indicating that intense mass transfer of fuel and air occurs radially inward at the flame surface.

• International Journal of Concrete Structures and Materials
• /
• 제9권3호
• /
• pp.307-321
• /
• 2015

The primary objective of this study is to investigate the feasibility of an innovative surface-mount sensor, made of a piezoelectric disc (PZT sensor), as a consistent source for surface wave velocity and transmission measurements in concrete structures. To this end, one concrete slab with lateral dimensions of 1500 by 1500 mm and a thickness of 200 mm was prepared in the laboratory. The concrete slab had a notch-type, surface-breaking crack at its center, with depths increasing from 0 to 100 mm at stepwise intervals of 10 mm. A PZT sensor was attached to the concrete surface and used to generate incident surface waves for surface wave measurements. Two accelerometers were used to measure the surface waves. Signals generated by the PZT sensors show a broad bandwidth with a center frequency around 40 kHz, and very good signal consistency in the frequency range from 0 to 100 kHz. Furthermore, repeatability of the surface wave velocity and transmission measurements is significantly improved compared to that obtained using manual impact sources. In addition, the PZT sensors are demonstrated to be effective for monitoring an actual surface-breaking crack in a concrete beam specimen subjected to various external loadings (compressive and flexural loading with stepwise increases). The findings in this study demonstrate that the surface mount sensor has great potential as a consistent source for surface wave velocity and transmission measurements for automated health monitoring of concrete structures.