• Journal of Korean Society on Water Environment
• /
• v.29 no.2
• /
• pp.247-258
• /
• 2013

A grid-based configuration of Land Surface Models (LSMs) coupled with a climate model can be advantageous in impact assessment of climate change for a large scale area. We assessed the applicability of Common Land Model (CoLM) to runoff and land surface temperature (LST) simulations at the domain that encompasses the Nakdong river basin. To establish a high resolution model configuration of a $1km{\times}1km$ grid size, both surface boundary condition and atmospheric inputs from the observed weather data in 2009 were adjusted to the same resolution. The Leaf Area Index (LAI) was collected from MODerate esolution Imaging Spectroradiometer (MODIS) and the downward short wave flux was produced by a nonstationary multi-site weather state model. Compared with the observed runoffs at the stations on Nakdong river, simulated runoffs properly responded to rainfall. The spatial features and the seasonal variations of the domain fairly well were captured in the simulated LSTs as well. The monthly and seasonal trend of LST were described well compared to the observations, however, the monthly averaged simulated LST exceeded the observed up to $2^{\circ}C$ at the 24 stations. From the results of our study, it is shown that high resolution LSMs can be used to evaluate not only quantity but also quality of water resources as it can capture the geographical features of the area of interest and its rainfall-runoff response.

• Proceedings of the KIEE Conference
• /
• 1991.11a
• /
• pp.67-70
• /
• 1991

When analyzing field or optimizing the shape of electrode in three dimensional space by using the surface charge method, we need to divide finely the surface of electrode into surface element like triangle or rectangle. In this case, there exist any variables in field analysis or field optimization. In particular, smoothness on the surface of optimized shape is not good. Recently, A paper is published where introducing NURB curve to field analysis and field optimization about two dimensional space model and axial symmetric three dimensional space model results in reduced variables, enhenced accuracy and improved smoothness. NURB curve has some useful properties like continuity, controllability and locality. Therefore in this paper, in order to improve the demerits of the established optimization method for three dimensional space models, the NURB surface that has same properties in common with NURB curve is used to analyze and optimize simple model.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.10 no.2
• /
• pp.89-94
• /
• 2001

This paper presents a study of surface roughness prediction model by orthogonal design in turning operation. Regression analysis technique has been used to study the effects of the cutting parameters such as cutting speed, feed depth of cut, and nose radius on surface roughness. An effect of interaction between two parameters on surface roughness has also been investigated. The experiment has been conducted using coated tungsten carbide inserts without cutting fluid. The reliability of the surface roughness model as a function of the cutting parameters has been estimated. The results show that the experimental design used in turning process is a method to estimate the effects of cutting parameters on sur-face roughness.

• Journal of the Korean Society of Safety
• /
• v.15 no.2
• /
• pp.46-50
• /
• 2000

A theoretical model for the evaluation of small surface fatigue crack initiated from a pit-type surface flaw is presented. The low frequency scattering model is developed based on the reciprocity principle for the elastic wave scattering. The effect of the flaw on the surface wave reflection from the crack is taken into account approximately by means of the stress intensity factor of cracks on a through thickness hole. The reflection coefficient of surface wave is derived for the prediction of small surface crack depth. Calculated results for pits with different sizes are illustrated.

• Atmosphere
• /
• v.19 no.2
• /
• pp.145-154
• /
• 2009

This study compared the sea surface wind pattern between model results from KMA operational model (RDAPS) and retrieved results from QuickSCAT in the 2006-2007 year. The mean spatial distributions of sea surface wind of RDAPS and QuikSCAT show the prominent seasonal patterns of summer and winter season adjacent to Korean Peninsular. The magnitude of sea surface wind predicted by RDAPS is weaker than that of QuikSCAT in most north Pacific ocean. In summer of 2006 positive bias with the maximum of 1 m/s is appeared in broad region of north Pacific ocean, however. the positive bias region is decreased to small region in 2007. Even though the predicted sea wind by RDAPS is stronger(weaker) than observed one by QuikSCAT in summer (winter), the RDAPS model simulate well the sea surface wind adjacent to Korean peninsular.

• Bulletin of the Korean Chemical Society
• /
• v.16 no.7
• /
• pp.661-666
• /
• 1995

The surface structure of the adsorption site for the identification of active sites involved in the Ziegler-Natta catalyst was studied by surface science techniques. As an example of a real catalyst, TiCl3 single crystals were prepared in a gradient furnace designed for this study and characterized by Auger Electron Spectroscopy (AES) and Low Energy Electron Diffraction (LEED) under ultrahigh vacuum condition. The chlorine covered Ti (0001) surface was employed as a model catalyst for the study of Ziegler-Natta catalyst. The diffuse LEED (DLEED) technique for the surface structural determination was applied to this disordered chlorine adsorbed on Ti (0001) surface. The diffuse scattering intensities were measured by a TV-computer method using a low light level video camera. From an analysis of two catalyst systems, the informations for the surface structure of the model catalyst surfaces were derived.

• Progress in Superconductivity and Cryogenics
• /
• v.7 no.2
• /
• pp.21-26
• /
• 2005

Breakdown characteristics and survival probability of turn-to-turn models were investigated under ac and impulse voltage at 77K. For experiments, two test electrode models were fabricated: One is point contact model and the other is surface contact model. Both are made of copper wrapped by O.025mm thick polyimide film(Kapton). The experimental results were analyzed statistically using Weibull distribution in order to examine the wrapping number effects on voltage-time characteristics under ac voltage as well as under impulse voltage in LN$_{2}$. Also survival analysis were performed according to the Kaplan-Meier method. The breakdown voltages of surface contact model are lower than that of point contact model, because the contact area of surface contact model is wider than that of point contact model. Besides, the shape parameter of point contact model is a little bit larger than that of surface contact model. The time to breakdown t$_{50}$ is decreased as the applied voltage is increased, and the lifetime indices slightly are increased as the number of layers is increased. According to the increasing applied voltage and decreasing wrapping number, the survival probability is increased.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.3
• /
• pp.380-387
• /
• 2011

In this paper, we considered the authoritative representation of Command and Fire Control System(CFCS) for the surface ship that was the engineering level model to develop system specifications and to analyze operational concepts on the concept design phase and to analyze military requirements, effectiveness and performance for the system. The engineering level model of CFCS can be used in simulation independently of the surface ship's type, and also it takes reuse, interoperability, and extension into consideration. The detailed sub-models, internal and external data interface, data flow among each sub-model, sensor and weapon models about the engineering level model of CFCS was defined. It was verified via engineering level simulations according to the V&V process.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.17 no.1
• /
• pp.74-82
• /
• 1988

A numerical analysis of the mathematical model for fluidized bed coal combustion has been performed. Based on the physical nature of the specific surface variation due to the decreasing of coal particle diameter according to the combustion process, the modified model which has been added the specific surface variation to the S.ENDRENYI and B.PALANCZ's mathematical model was established in this study. From the numerical analysis of these two models, it was found that the perfect combustion time is increasing largely at least 5 seconds in the modified model in comparison with that of the S.ENDRENYI and B.PALANCZ's model, and the bed temperature and the coal particle surface temperature during the main combustion period represent constant with time in the S.ENDRENYI and B.PALANCZ's model, on the other hand, these properties are decreasing linearly with time in the modified model.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.3
• /
• pp.1-8
• /
• 2011

In this study, a wind hazard map over Korea peninsula based on geographical information is developed, which consists of the surface roughness model, the topographical effect model and the homogeneous wind model. The surface roughness model is assessed to evaluate the effect of the surface roughness on the wind field near ground. The topographical effect model is assessed to quantify the effect of the speed-up caused by topology, which is calculated by adopting the topographical effect factor in Korea building code (2005). The homogeneous wind map is created either by a frequency analysis method for meteorological data or a typhoon simulation. The results show that the wind hazard map can be applied to the determination of insurance premium as well as the assessment of loss and damage.