• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.3
• /
• pp.345-351
• /
• 2008

Fe-impregnated activated carbon(Fe-AC) was prepared by Fe(III) loading on activated carbon(AC) in various preparation pH. In order to evaluate the stability of Fe-AC, dissolution of iron from Fe-AC in acidic conditions was measured. In addition, batch experiments were conducted to monitor the removal efficiency of copper by Fe-AC. Results of stability test for Fe-AC showed that the amount of extracted iron increased with contact time but decreased with increasing solution pH. The dissolved amount of iron gradually increased at solution pH 2 and finally 13% of the total iron loaded on activated carbon was extracted after 12 hr. However dissolution of iron was negligible over solution pH 3. Removal of Cu(II) by Fe-AC was greatly affected by solution pH and was decreased as solution pH increased as well as initial Cu(II) concentration decreased. Surface complexation modeling was performed by considering inner-sphere complexation reaction and using the diffuse layer model with MINTEQA2 program.

• Journal of Biomedical Engineering Research
• /
• v.23 no.6
• /
• pp.467-475
• /
• 2002

Hyperthermia using transrectal thermal probes has been used for a noninvasive treatment of prostate diseases. However it is known that heating the rectal wall at excessively high temperature can lead to destruction of the rectal mucous membrane. and it is difficult to maintain an optimum temperature over the entire prostate. Thus, a more accurate understanding of the heat transfer mechanism between prostate and hyperthermia system is needed Numerical analysis was performed to investigate how the cold/warm stimulations on the prostate surface affect the temperature distribution in the prostate model. The general purpose software "FLUENT" was used for obtaining a finite volume solution to the unsteady conduction equation and to calculate the time-varying temperature in the prostate. Effects of the warm/cold stimulations and the stimulation frequency on the temperature distribution were simulated. and we visualized how hyperthermia affected the inside of the prostate. It was found that the effect of hyperthermia by using a typical heating method is limited due to the low thermal conductivity of the prostate. Consecutive repetitions of warm and cold stimulations were considered to provide the thermal irritations inside a prostate. The effects of temperature difference and duration of warm/cold stimulations were investigated, and basic data for the optimum period and effective patterns of stimulations were obtained. A simplified bioheat equation was also solved to describe effects of the blood flow on the blood-tissue heat transfer. The effect of blood flow was not dominant compared to that of warm/cold stimulations. These results might be used as data for design of prostate treating probe, prostatic therapy and thermal stimulation effects on the prostate.

• Journal of Biosystems Engineering
• /
• v.11 no.2
• /
• pp.55-65
• /
• 1986

The resistance to the passage of airflow through various agricultural products is an important consideration in the design of an aeration or drying system. The amount of resistance to airflow varied widely from one kind of grain to another, and depended upon airflow rate, surface texture and shape of the particles, the size and configuration of voids, and foreign and fine material in the grain bed. The airflow rate was the major factor considered on this kind of study in the early stages. But these days, the studies on the resistance to airflow of grain affected by grain moisture content and foreign and fine material have been widely carried out. However the foreign an fine material in the grain bed could not be a major factor on the study in Korea because there were only a few grain process procedure after harvesting it. The objectives of this study were to investigate the effect of moisture content and airflow rate on airflow resistance to grain, and to develop a model to predict the static pressure drop across the grain bed as a function of moisture content and airflow rate. The rough rice varieties, Akibare, Milyang 15 (Japonica types), Samkwang, Backyang (Indica types)and covered barley variety, Olbori, which were harvested in 1985 were used in the experiment after cleaning them. Resistances to airflow of grain were investigated at four levels of moisture content (13-25%, wb.) for ten different airflow rates($0.01-0.15m^3/sm^2$). The results of this study are summarized as follows; 1. Theaverage bulk densities were $585.3kg/m^3$ for rough rice and $691.6kg/m^3$ for barley at the loose fill, and were $648.8kg/m^3$ for rough rice and $758.2kg/m^3$ for barley at the packed fill. The pressure drops at the packed fill beds were approximately 1.4 to 1.8 times higher than those at the loose fill beds. 2. The pressure drops across grain beds deceased with the increase of moisture content and increased with airflow rate. The decreasing rates of pressure drop across grain beds according to the moisture contents at the lower airflow rates were higher than those at the higher airflow rates, and the increasing rates of pressure drop according to the airflow rates at the lower moisture contents were higher those at higher moisture contents. 3. The pressure drop across barley bed were much higher than rough rice beds and the pressure drops across Japonica type rough rice beds were a little higher than Indica type. 4. The mathematical models to predict the pressure drop across grain beds as a function of moisture content and airflow rate were developed from these experiments.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.24 no.3
• /
• pp.75-82
• /
• 2016

Objective of this experiment was to predict the potential methane production with crop residues at different loading rates. Anaerobic digestion of barley and rapeseed straw substrates for biogas production was performed in Duran bottles at various biomass loading rates with crop residues. Through kinetic model of surface methodology, the methane production was fitted to a Gompertz equation. For the biogas production at mesophilic digestion with crop residues, it was observed that maximum yield was 37.2 and 28.0 mL/g at 6.8 and 7.5 days after digestion with 1% biomass loading rates of barley and rapeseed straws, respectively. For the methane content of mesophilic digestion, there were highest at 61.7% after 5.5 days and 75.0% after 3.4 days of digestion with barley and rapeseed straw on both 5% biomass loading rates, respectively. The maximum methane production potentials were 159.59 mL/g for 1% barley straw and 156.62 mL/g for 3% rapeseed straw at mesophilic digestion. Overall, it would be strongly recommended that biomass loading rate was an optimum rate at mesophilic digestion for using 1% barley and 3% rapeseed straws for feed stocks.

• Journal of Astronomy and Space Sciences
• /
• v.22 no.4
• /
• pp.441-450
• /
• 2005

The organic material is one of the most popular material for the satellites and the spacecrafts in order to perform the thermal management, and to protect direct exposure from the space environment. The present paper observes material property changes of organic material under the space environment by using ground facilities. One of the representative organic thermal management material of satellites, 2 mil ITO(Indium Tin Oxide) coated aluminized KAPTON was selected for experiments. In order to investigate the single parametric effect of protons in space environment, MC-50 cyclotron system in KIRAMS(Korea Institute of Radiological and Medical Science) was utilized for the ion beam irradiation of protons and ion beam dose was set to the Very Large August 1972 EVENT model, the highest protons occurrence near the earth orbit in history. The energy of ion beam is fixed to 30MeV(mesa electron volt), observed average energy, and the equivalent irradiance time conditions were set to 1-year, 3-year, 5-year and 10-year exposure in space. The procedure of analyses includes the measurement of the ultimate tensile strength for the assessment of quantitative degradation in material properties, and the imaging analyses of crystalline transformation and damages on the exposed surface by FE-SEM(Field Emission Scanning Electron Spectroscopy) etc.

• Tunnel and Underground Space
• /
• v.24 no.4
• /
• pp.255-274
• /
• 2014

The target of this study is large scale rock slope collapsed by around 7 pm on August, 2012, which is located at ${\bigcirc}{\bigcirc}$ limestone quarries of Gangneung city, Gangwondo. The slope prior to the collapse is formed as the height of about 200 m and the average inclination of $45^{\circ}$. The estimated amount of the collapse is about $1,500,000m^3$ with respect to the slope after the collapse. Geotechnical and field investigations such as boring, geophysical prospecting, surface geological survey, geological lineaments, borehole imaging, metric 3D imaging, experimental and field test, mining work by year, and daily rainfall were performed to find the cause of rock slope failure. Various analyzes using slope mass rating, stereonet projection, limit equilibrium method, continuum and non-continuum model were conducted to check of the stability of the slope. It is expected that the cause of slope failure from the results of various analysis and survey is due to the combined factors such as topography, rainfall, rock type and quality, discontinuities, geo-structural characteristics as the limestone cavity and fault zones, but the failure of slope in case of the analysis without the limestone cavity is not occurred. Safe factor of 0.66 was obtained from continuum analysis of the slope considering the limestone cavity, so the ultimate causes of slope failure is considered to be due to the influence of limestone cavity developed along fault zone.

• Journal of Korea Soil Environment Society
• /
• v.3 no.2
• /
• pp.101-114
• /
• 1998

Soil vapor extraction (SVE) is known to be an effective process to remove the contaminants from the soils by enhancing the vaporization of organic compounds using forced vapor flows or applying vacuum through soils. Experiments are carried out to investigate the effects of the organic contaminants, types of soils, and water contents on the removal efficiency with operating time. In the study, simulated soils include the glass bead which has no micropore, sand and molecular sieve which has a large volume of micropores. As model organic pollutants, toluene, methyl ethyl ketone, and trichloroethylene are selected. Desorption experiments are conducted by flowing nitrogen gas. Under the experimental conditions, it is found that there are linear relationships between logarithm of removal efficiency and logarithm of number of pore volumes. The number of pore volumes are defined as the total amount of air flow through the soil column divided by the pore volume of soil column. For three organic compounds studied, the removal rate is slow for no water content, while the number of pore volumes for removal of organic compounds are notably reduced for water contents up to 37%. For the removal of dense organic compound, such as trichloroethylene, a large number of pore volumes are needed. Also, the effects of the characteristics of simulated soils on the removal efficiency of organic compounds are studied. After the characterization of soil surface, porosity of soil columns and types of contaminants, the results could provide a basis for the design of SVE process.

• The Journal of Internal Korean Medicine
• /
• v.29 no.1
• /
• pp.117-129
• /
• 2008

Background & Objective : Naeso-san(NSS) has been used for the treatment of functional dyspepsia, regarded as a gastric dysmotility disease. A main cause of gastric dysmotility is antral dilatation or antroduodenal uncoordination. Therefore, we investigated the effect of NSS on gastric motility and its mechanism of action, as well as the morphologic changes in antral dilatated rats. Methods : Antral dilatated rats were induced by wrapping a nonabsorbable rubber ring(D:6mm, W:4mm, T:1mm) around the 1st portion of the duodenum for 8 weeks. Then morphologic changes were investigated and compared with normal intact rats before and after 8 weeks. Gastric emptying was measured by administration of normal saline(NS) or NSS in normal intact and antral dilatated rats. In another series of experiments to evaluate the mechanism of NSS under delayed conditions, normal intact rats were treated with atropine sulfate(1mg/kg, s.c.), quinpirole HCl(0.3mg/kg, i.p.), $NAME(N^{G}-nitro-L-arginine$ methyl ester, 75mg/kg, s.c.) and cisplatin(10mg/kg, i.p.), respectively. The myoelectrical activity of the gastric smooth muscle was recorded in normal intact and antral dilatated rats. The contractile waves were measured for 30 minutes before and after administration of each solution(NS, NSS). Results : Body weight gain of antral dilatated rats was significantly lower than that of the controls. Futhermore, we found the thickness of the mucosal and muscular layers and surface area of the stomach increased significantly compared with controls. NSS 278㎎/㎏ improved gastric emptying more than normal saline or NSS 93mg/kg in normal intact(p=0.026) and antral dilatated rats(p=0.03). NSS enhanced gastric emptying significantly in the NAME treated group(p=0.002). NSS 278mg/kg increased the significant postprandial dominant power than that of NS in normal intact rats, whereas there was no statistical significance in antral dilatated rats. Conclusions : NSS stimulates gastric motility through the cholinergic pathway. We expect that pathologic model with antral dilatation can be used as an exprimental tool which is similar to dyspepsia and NSS would be effective especially in dysmotility-like functional dyspepsia with antral dilatation or impaired reservoir functions such as gastric adaptive relaxation.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.04a
• /
• pp.835-841
• /
• 2013

Modern solid-state gyroscopes (HRG) with hemispherical resonators from high-purity quartz glass and special surface superfinishing and ultrathin gold coating become the best instruments for precise-grade inertial reference units (IRU) targeting long-term space missions. Designing of these sensors could be a notable contribution into development of Korea as a space nation. In participial, 40mm diameter thin-shell resonator from high-purity fused quartz, fabricated as a single-piece with its supporting stem has been designed, machined, etched, tuned, tested, and delivered by STM Co. (ATS of Ukraine) several years ago; an extremely-high Q-factor (upto 10~20 millions) has been shown. Understanding of the best way how to match such a unique sensor with inner glass assembly of the gyro means how to use the high potential in a maximal extent; and this has become the urgent task. Inner quartz glass assembly has a very thin indium (In) layer soldered the resonator and its silica base (case), but effects of internal resonances between operational modal pair of the shell-cup and its side (parasitic) modes can notable degrade the potential of the sensor as a whole, instead of so low level of resonator's intrinsic losses. Unfortunately, there are special combinations of dimensions of the parts (so-called, "resonant sizes"), when intensive losses of energy occurs. The authors proposed to use the length of stem's fixture as an additional design parameter to avoid such cases. So-called, a cyclic scheme of finite element method (FEM) and ANSYS software were employed to estimate different combinations of gyro assembly parameters. This variant has no mismatches of numerical origin due to FEM's discrete mesh. The optimum length and dangerous "resonant lengths" have been found. The special attention has been paid to analyses of 3D effects in a cup-stem transient zone, including determination of a difference between the positions of geometrical Pole of the resonant hemisphere and of its "dynamical Pole", i.e., its real zone of oscillation node. Boundary effects between the shell (cup) and 3D short "beams" (inner and outer stems) have been ranged. The results of the numerical experiments have been compared with the classic model of a quasi-hemispherical shell band with inextensional midsurface, and the solution using Rayleigh's functions of the $1^{st}$ and $2^{nd}$ kinds. To guarantee the truth of the recommended sizes to a designer of the real device, the analytical and FEM results have been compared with experimental data for a party of real resonators. The consistency of the results obtained by different means has been shown with errors less than 5%. The results notably differ from the data published earlier by different researchers.

• Archives of Plastic Surgery
• /
• v.32 no.1
• /
• pp.5-11
• /
• 2005

Prostaglandin $E_1$($PGE_1$) is known to have various physiological action such as vasodilatation, decrease of blood pressure, angiogenesis, inhibition of platelet aggregation and so forth. $PGE_1$ has been developed in many different formulations in order to overcome its chemical instability and deactivation in the lungs when administered parenterally. Lipo-AS013 is a potent drug with higher chemical stability and greater vascular wall targeting than others. The study was done on $3{\times}10cm$ model flap of dorsal skin of Sprague-Dawley rats and the flap perfusion survival were observed and documented. The flap treated with Lipo-AS013 beforehand was given intravenously Sodium fluorescein 10 minutes later, and then Percent Dye Fluorescence Index(% DFI) was calculated. The results were compared to a control group and the group administered locally epinephrine.. In the control group, the % DFI and flap survival rate increased from $54.1{\pm}6.7$ to $65.0{\pm}2.6$(p<0.01) while in Lipo-AS013 group from $55.3{\pm}2.2$ to $67.4{\pm}1.9$(p<0.01), respectively. In the epinephrine group, the % DFI(p<0.05) and flap survival rate(p<0.001) decreased. In the both epinephrine and Lipo-AS013 group Percent DFI and flap survival rate are comparable with the control group.The result indicates that the potent Lipo-AS013 enhances the blood flow and flap survival. This highly potent Lipo-AS013 may have targeting ability and accumulate $PGE_1$ onto the vascular walls. A quantitative analysis of fluorescence on the skin surface is a reliable tool to measure the blood perfusion into an ischemic flap and its viability. Further comparative study with conventional $PGE_1$ and Lipo-$PGE_1$ is needed in order to clarify the action and efficiency of Lipo-AS013.