• 센서학회지
• /
• 제26권6호
• /
• pp.402-407
• /
• 2017

Characteristics of various material surface plasmon resonance (SPR) chips were investigated in angular interrogation mode and intensity interrogation mode. Among five metals, silver (Ag), gold (Au), copper (Cu), chromium (Cr) and titanium (Ti), three metals, Ag, Au and Cu were paid attention to since their characteristics can be easily analyzed in angular interrogation mode by investigating the change of their reflectance curves according to refractive index change from 1.331 to 1.335. Most of SPR chips with various configurations showed the similar property in angular interrogation mode. The application of the SPR chip made of Ag, Au and Cu or their combinations depends on their reflectance properties. In intensity interrogation mode, the operation range may be limited since the variation of the intensity was not linearly related to refractive index change ranging from 1.331 to 1.335. However, the SPR chip containing high ratio of Ag may be applicable to high sensitive detection due to their sharp reflectance curves in intensity interrogation mode.

• 한국CDE학회논문집
• /
• 제2권3호
• /
• pp.133-141
• /
• 1997

In the process of car body design, various surfaces are generated from the given boundary curves. Depending upon the method of the surface generation and the quality of the boundary curves provided, the resulting surfaces may have global or local irregularities in many cases. Thus it would be necessary for the designer to evaluate the surface quality and to modify the surface or to use the different generation method based on the evaluation results. This capability is very important because the defect of the surface quality detected in the production stage will require the rework of the dies and will cause a big loss in cost and time. A method of surface interrogation using reflection line is introduced. In this paper, We applied reflection mapping to generate reflection lines on the trimmed NURBS surface. Since reflection lines are obtained from reflection mapping that uses simple and physically acceptable mapping algorithm, they can be efficiently used to simulate the reflection test on the real part in the production line.

• Journal of the Optical Society of Korea
• /
• 제13권3호
• /
• pp.392-397
• /
• 2009

We designed a wavelength interrogation-based surface plasmon resonance (SPR) biosensor to detect avian influenza DNA (AI-DNA). Hybridization reactions between target AI-DNA probes and capture probes immobilized on a gold surface were monitored quantitatively by measuring the resonance wavelength in the visible waveband. The experimental results were consistent with numerical calculations. Although the SPR detection technique does not require the DNA to be labeled, we also evaluated fluorescently-labeled targets to verify the hybridization behavior of the AI-DNA. Changes in resonance were found to be linearly proportional to the amount of bound analyte. A wavelength interrogation-type SPR biosensor can be used for rapid measurement and high-throughput detection of highly pathogenic AI viruses.

• Journal of Mechanical Science and Technology
• /
• 제17권3호
• /
• pp.409-421
• /
• 2003

The hierarchical recursive local-correlation PIV algorithm with CBC (correlation based correction) method was employed to increase the spatial resolution of PIV results and to reduce error vectors. The performance of this new PIV algorithm was tested using synthetic images, PIV standard images of Visualization Society of Japan, real flows including ventilation flow inside a vehicle passenger compartment and wake behind a circular cylinder with riblet surface. As a result, most spurious vectors were suppressed by employing the CBC method, the hierarchical recursive correlation algorithm improved the sub-pixel accuracy of PIV results by decreasing the interrogation window size and Increased spatial resolution significantly. However, with recursively decreasing of interrogation window size, the SNR (signal-to-noise ratio) in the correlation plane was decreased and number of spurious vectors was increased. Therefore, compromised determination of optimal interrogation window size is required for given flow images, the performance of recursive algorithm is also discussed from a viewpoint of recovery ratio and error ratio in the paper.

• Smart Structures and Systems
• /
• 제20권3호
• /
• pp.343-350
• /
• 2017

An experimental study is presented of the application of fiber Bragg grating (FBG) interrogation method based on optical time-domain reflectometery (OTDR) to monitoring strain in bent reinforced concrete beams. The results obtained with the OTDR-based method are shown to agree well with the direct spectral measurements. Strain sensitivity, resolution and measurement range amounted to $0.0028dB/{\mu}strain$; $30{\mu}strain$; $4000{\mu}strain$, correspondingly. Significant differences are observed in surface and inner deformations of the test beams which can be attributed to different mechanical properties of concrete and steel reinforcement. The prospects of using OTDR-based FBG interrogation technique in real-life applications are discussed.

• 대한기계학회논문집A
• /
• 제24권1호
• /
• pp.173-181
• /
• 2000

Depending upon the method of the surface generation and the quality of the boundary curves provided, the resulting surfaces may have global or local irregularities in many cases. Thus it would be necessary for the designer to evaluate the surface quality and to modify the surface. This capability is very important because the defect of the surface requires the rework of the dies that causes a big loss in cost and delivery time. To simulate the reflection line test in the actual production line, a faster generation algorithm is presented. Among., various surface interrogation methods using reflection lines, Blinn-Newell type of reflection mapping is applied to generate reflection lines on the trimmed NURBS surface. The generation of reflection lines is formulated as a surface-plane intersection problem, and solved by surface-contouring techniques. In addition, a modified reflection map is proposed to eliminate the discontinuity of reflection lines due to the configuration of the reflection map. A fast reflection line algorithm is developed utilizing an efficient traced contouring technique, and proved to be well suited for real-time quality-assessment task.

• 한국정보과학회논문지:시스템및이론
• /
• 제29권8호
• /
• pp.440-444
• /
• 2002

본 논문에서는 회전체(surface of revolution)의 isophote를 계산하는 효율적이고 안정성 있는 알고리즘을 제시한다. 회전체는 곡면의 특성 상 곡면이 원의 집합으로 이루어지며 하나의 원 위에 있는 점들에 대한 법선 벡터의 집합은 하나의 원뿔(cone)을 이룬다. 원뿔을 이루는 법선 벡터의 특성과 회전체의 대칭성을 이용하여 곡선과 직선의 교점 계산만으로 isophote에 속한 모든 구성요소(connected component)를 발견하는 방법을 제시한다. 또한 회전체 곡면 상의 isophote를 매개변수 곡선으로 표현함으로써 곡선을 쉽게 추적하는 방법을 제시한다.

• Journal of Mechanical Science and Technology
• /
• 제15권2호
• /
• pp.160-171
• /
• 2001

Depending upon the method of the surface generation and the quality of the designed boundary curves, the resulting surfaces may have global or local irregularities in many cases. Thus, it would be necessary for the designer to evaluate the surface quality and to modify the surface. This is very important because the defect of the surface causes the rework of the dies, increasing cost and delivery time significantly. To simulate the reflection line test in the actual production line, a faster algorithm for generating reflection lines is presented. In this paper, among various surface interrogation methods using reflection lines, Blinn-Newell type of reflection mapping is applied to generate the reflection lines on the trimmed NURBS surfaces. The derivation of reflection lines is formulated as a surface-plane intersection problem (Jung 1994) and is solved by surface-contouring techniques. Also, for eliminating the discontinuity of reflection lines due to the configuration of reflection map, a modified reflection map is proposed. An efficient traced contouring technique is utilized for the computational efficiency and proves to be well suited for the real-time quality-assessment task.

• 한국수자원학회논문집
• /
• 제46권8호
• /
• pp.821-831
• /
• 2013

최근 수리 실험 및 계측 분야에 영상유속계가 많이 이용되고 있다. 그러나 영상유속계의 영상 분석에 대한 표준적인 방법과 측정 불확도가 정립되어 있지 않아 일반 사용자들이 사용하기 어려운 것이 사실이다. 특히 영상유속계를 이용한 유속 산정 시 상관영역 크기 결정에 대한 기준이 없기 때문에 사용자마다 유속 산정 결과가 차이가 나는 문제가 있다. 이에 본 연구에서는 영상유속계의 상관영역 크기 변화에 따른 오차분석을 통해 상관영역 크기 결정을 위한 자료를 제시하고 자한다. 오차분석을 위해 12개의 인공영상군을 제작하였으며, 다양한 입자수와 입자크기의 영상을 획득한 후 상관영역의 크기를 변화시키면서 산정한 유속을 인공영상의 유속 참값과 비교하여 오차분석을 수행하였다. 오차 분석결과 상관영역의 크기 변화에 따라 영상유속계로 산정한 유속값에 대한 오차가 달라짐을 확인하였고, 상관영역의 크기를 크게 결정할수록 오차가 줄어드는 것으로 나타났고, 동일한 상관영역의 크기로 유속을 산정할 경우 입자 크기가 증가할수록 또는 입자수가 증가할수록 오차가 작게 나타났다. 특히 영상유속계의 오차는 입자의 크기 보다는 입자수의 변화에 좀 더 영향을 많이 받는 것으로 나타났다. 또한 상관영역의 크기가 커짐에 따라 최대 오차와 최소 오차간의 간격이 줄어드는 것을 확인하였으며, 영상 전체에서 산정한 유속의 평균 오차가 5% 이하를 만족시키는 상관영역 크기를 기준으로 그 이하의 상관영역에 대해서는 최대 오차와 최소 오차간의 차이가 크게 나타나 영상유속계의 측정 불확실성이 큰 것으로 나타났다. 영상유속계의 신뢰수준별 입자밀도 변화에 따른 최소 상관영역의 크기를 분석한 결과 전반적으로 입자밀도가 커짐에 따라 상관영역의 크기는 작아지는 것으로 나타났지만 입자밀도가 작더라도 입자수가 큰 경우에는 신뢰수준을 만족시키는 최소 상관영역의 크기가 감소하는 것으로 나타났다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.975-976
• /
• 2006

The passive type RFID (Radio Frequency Identification) System using Surface Acoustic Wave (SAW) tag at 900 MHz in the range of more than 1 m was fabricated. To improve interrogation range of the system propose a method to increase isolation between transmitter and receiver. This method using a direct conversion architecture achieves a leakage rejection of 10 dB increased compared with conventional system. Measured interrogation range is more than 1 m.