• 한국염색가공학회지
• /
• 제25권3호
• /
• pp.223-231
• /
• 2013

This research has a main focus on providing fundamental data for on-the-spot industrial fields by comparing and contrasting physical properties of fluffy spun-like material. The fluffy spun-like yarn is developed as fluffy yarn similar to natural spun-like yarn by treating polyester(FDY and + type shaped DTY) with ATY machine. In this experiment, using ATY machine for raw material texturing, we produced two fluffy yarns: (i) + type shaped(50d/36f, DTY) as core yarn and 100d/192f FDY as effect yarn[ATY(D)], (ii) FDY(75/36) as core yarn and 100d/192f FDY [ATY(F)] as effect yarn. After producing thous yarns, we twisted them with 500T/M, 700T/M, 1000T/M, respectively. produced yarns through this process were used as the samples for this experiment. Even though the shrinkage of fluffy yarn ATY(F) and ATY(D) becomes high as treated temperature rises and treated time lengthens, it is more affected by treated temperature then by treated time. In this experiment, produced fluffy yarn[ATY(D)] shows a little high values for temperature, but almost same values for higher temperatures. When we compare ATY(F) with ATY(D) fluffy yarn shows more natural fluffy yarn surface structure like natural cotton. The shrinkage of 700T/M twisted ATY(D) fluffy yarn show about 11% under treated temperature $180^{\circ}C$ and treated time 30min, and about 7% under $120^{\circ}C$ and 30min, respectively. But the shrinkage of 1000T/M fluffy yarn shoes about 9% and 6% under same conditions. Regarding treated time, tenacity and initial modulus of ATY(D) fluffy yarn rise high until 30min, but do not show much increase above 30min. Regarding treated temperature, tenacity and initial modulus of it rise high aboyer $140^{\circ}C$.

• 실천공학교육논문지
• /
• 제8권2호
• /
• pp.121-128
• /
• 2016

사출 성형 공정에서 외관 품질 문제는 대부분의 성형품에서 발생한다. 금형의 열역학적 설계 중의 하나는 어떠한 위치에서 캐비티 표면 온도가 되도록 균일하게 상승하는 것으로 수행된다. 실험적인 평가를 바탕으로 최적의 사출 성형 조건에서 성형품의 미려한 외관 품질을 위해서 캐비티 벽 온도와 다듬질 가공된 캐비티 표면이 성형품의 외관 문제를 피할 수 있는 가장 중요한 요소이다. 또한 잘못된 게이트 형식과 위치 선택은 성형품의 품질에 상당한 영향이 있어서, 각 캐비티로 부터 올바른 러너 밸런스를 유지하는 것은 매우 중요하다. 실질적으로 생산 현장에서 이행될 수 있는 사출 성형 품질을 위한 최적의 금형 설계와 실무 금형 기술 능력 향상을 위해서 현장 교육을 위한 실무적인 금형기술 과정의 교육훈련 모델을 제시하였다.

• 한국염색가공학회지
• /
• 제19권3호
• /
• pp.26-36
• /
• 2007

This study was carried out to treat the aqueous solutions containing reactive dyes(RB19, RR120 and RY179) by the Ozone demand flask method and adsorption process using activated carbon fiber(ACF) which are one of the main pollutants in dye wastewater. Ozone oxidation of three kinds of the reactive dyes was examined to investigate the reactivity of dyes with ozone, competition reaction and ozone utilization on various conditions for single- and multi-solute dye solution. Concentration of dyes was decreased continuously with increasing ozone dosage in the single-solute dye solutions. Competition quotient values were calculated to investigate the preferential oxidation of individual dyes in multi-solute dye solutions. Competition quotients(CQi) and values of the overall utilization efficiency, ${\eta}O_3$, were increased at 40mg/l of ozone dosage in multi-solute dye solutions. ACF(A-15) has much larger specific surface area$(1,584m^2/g-ACF)$ in comparison with granular activated carbon adsorbent (F400, $1,125m^2/g-GAC$), which is commonly used, and most of pores were found to be micropores with pore radius of 2nm and below. It was found that RB19 was most easily adsorbed among the dyes in this study. In the case of PCP (p-chlorophenol) and sucrose, which are single component adsorbate, adsorption capacities of ACF(A-15) were in good agreement with the batch adsorption measurement, and saturation time predicted of ACF columns for these components was also well agreed with practically measured time. But in the case of reactive dyes, which have relatively high molecular weight and aggregated with multi-components, adsorption capacities or saturation time predicted were not agreed with practically measured values.

• 한국염색가공학회지
• /
• 제30권4호
• /
• pp.313-320
• /
• 2018

As carbon fiber reinforced composites(CFRP) are widely used in aerospace, automobile, marine, and sports goods applications, they have been studied extensively by various researchers. However, CFRP have been pointed out because of machining problems such as delamination and burr phenomenons. Especially, hole machining process, drilling, has non-smooth features on inlet and outlet surfaces of drilled hole. This kind of machining problem can be controlled to some extent by using high modulus pitch-CF, which has considerable effects on fracture behavior of composite compared with only PAN CF composite. Therefore, PAN and pitch hybridized CF composites were prepared having high strength and modulus. The results demonstrate that the hybrid CFRP specimens with pitch CF offer the good potential to enhance modulus as well as strength properties. Dynamic mechanical, flexural, and impact properties were measured and analyzed. Morphological surface of the composites were also observed by IFS-28, canon after hole machining.

• 대한치과기공학회지
• /
• 제44권3호
• /
• pp.67-75
• /
• 2022

Purpose: This study aimed to comparatively evaluate the stress distribution of bones surrounding the implant system to which both titanium and polyetheretherketone (PEEK) abutments are applied using a three-dimensional finite element analysis. Methods: The three-dimensional implant system was designed by the computer-aided design program (CATIA; Dassault Systemes). The discretization process for setting nodes and elements was conducted using the HyperMesh program (Altair), after finishing the design of each structure for the customized abutment implant system. The results of the stress analysis were drawn from the Abaqus program (Dassault Systèmes). This study applied 200 N of vertical load and 100 N of oblique load to the occlusal surface of a mandibular first molar. Results: Under external load application, the PEEK-modeled dental implant showed the highest von Mises stress (VMS). The lowest VMS was observed in the Ti-modeled abutment screws. In all groups, the VMS was observed in the crestal regions or necks of implants. Conclusion: The bones surrounding the implant system to which the PEEK abutment was applied, such as the cortical and trabecular bones, showed stress distribution similar to that of the titanium implant system. This finding suggests that the difference in the abutment materials had no effect on the stress distribution of the bones surrounding implants. However, the PEEK abutments require mechanical and physical properties improved for clinical application, and the clinical application is thought to be limited.

• 한국염색가공학회지
• /
• 제33권4호
• /
• pp.202-209
• /
• 2021

Natural dyes are more expensive than synthetic dyes and the dyeing process, which is mainly immersion of dye, is complicated. For this reason, relatively small-scale production methods were predominant. However, awareness and interest in environmental sustainability is rising globally, and the use of synthetic dyes causes various environmental problems such as wastewater and CO₂ emission, so the consumption of natural dyes is increasing. In addition, interest in digital textile printing, an eco-friendly dyeing method that can produce products of various designs and uses less water, is growing. In this study, natural indigo dye (Indigofera tinctoria) was used as a raw material for Digital Textile Printing ink, and ¹⁴C (Biocarbon) present in it was measured to confirm whether it was derived from natural ingredients. The performance was confirmed by testing the pH, viscosity, electrical conductivity, surface tension, and particle size analysis of natural indigo ink. In addition, the performance of natural indigo DTP ink and printing fabric was evaluated by inspecting the change in color fastness and corresponding index substances before and after digital printing with natural indigo DTP ink on textiles. Through this, the possibility of commercialization of DTP ink and printing fabric using natural indigo was confirmed.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.25-26
• /
• 2021

Due to COVID-19, the spread of non-face-to-face culture is increasing the time spent indoors. Accordingly, it is necessary to reduce indoor air pollutants. Also, among building materials, there are paints. As the number of coatings increases, the coating film becomes thick, and there is a risk of cracking and falling off. Therefore, this study is to examine the adsorption properties of indoor air pollutants according to the number of coatings of a paint mixed with powdered activated carbon. In the experimental plan, the addition ratio of powdered activated carbon was selected as 30%, and the number of coatings was selected as primcoating, second coat, and finishing coat, and the concentration of formaldehyde and volatile organic compounds were measured. As a result, as the number of coatings increased, the concentration of formaldehyde and volatile organic compounds tended to decrease. This is considered to be due to the fact that not only the physical adsorption acted by the internal pores of the powdered activated carbon, but also because a lot of powdered activated carbon was present on the painted surface as the coating film was formed. However, since it is judged that there is an error in the concentration due to the inflow of external air as the chamber cover is opened to put the test object in the adsorption test process, it is considered that the experimental method needs to be supplemented.

• 대한치과보철학회지
• /
• 제38권5호
• /
• pp.595-605
• /
• 2000

Dental ceramics have good aesthetics, biocompatibility, low thermal conductivity, abrasion resistance, and color stability. However poor resistance to fracture and shrinkage during firing process have been limiting factors in their use, particularly in multiunit ceramic restorations. A new method for making all-ceramic crowns that have high strength and low processing shrinkage has been developed and is referred to as the Vita In-Ceram method. This study was performed to investigate the effect of $CeO_2$ addition in borosilicate glasses on the strength of alumina-glass composites. Porous alumina compacts were prepared by slip casting and sintered at $1,100^{\circ}C$ for 2 hours. Dense composites were made by infiltration of molten glass into partially sintered alumina at $1,140^{\circ}C$ for 4 hours. Specimens were polished sequentially from #800 to #2000 diamond disk. and the final surface finishing on the tensile side was received an additional polishing sequence through $1{\mu}m$ diamond paste. Biaxial flexure test was conducted by using ball-on-three-ball method at a crosshead speed of 0.5mm/min. To examine the microstructural aspect of crack propagation in the alumina-glass composites, Vickers-produced indentation crack was made on the tensile surface at a load of 98.0 N and dwell time of 15 sec, and the radial crack patterns were examined by an optical microscope and a scanning electron microscope. The results obtained were summarized as follows; 1. The porosity rates of partially sintered alumina decreased with the rising of firing temperature. 2. The maximum biaxial flexure strength of 423.5MPa in alumina-glass composites was obtained with an addition of 3 mol% $CeO_2$ in glass composition and strength values showed the aspect of decrease with the increase of $CeO_2$ content. 3 The biaxial flexure strength values of alumina-glass composites were decreased with rising the firing temperature. 4. Observation of the fracture surfaces of alumina-glass composites indicated that the enhancement of strength in alumina-glass composites was due to the frictional or geometrical inter-locking of rough fracture surfaces and ligamentary bridging by intact islands of materials left behind the fracture front.

• 박물관보존과학
• /
• 제26권
• /
• pp.119-142
• /
• 2021

금동은제식리는 무령왕릉에서 출토된 무령왕의 식리로 결실된 부분이 많아 재조사의 필요성이 꾸준히 제기되었다. 이에 과학적인 보존처리 및 분석을 진행하여 제작기법을 연구하였다. 보존처리는 형태 복원 및 편 접합에 중점을 두고 실시하였다. 그 결과, 우측 식리 상연과 뒤축 일부 편을 접합하여, 결합방법 및 발등 결합에 사용된 원두정의 개수를 확인하였다. 성분 분석결과, 외판 등은 순동에 수은 아말감 금도금을 한 것으로 추정되며, 내판은 순은을 사용하였다. 금동은제식리의 주문양은 봉황문, 연화문, 6엽 화문이며, 전체적으로 연화문의 비율이 높다. 각 판의 결합은 영락사, 금동사, 원두정, 사면정을 사용하였다. 내·외판 결합은 영락사를 사용하였는데, 내측판의 중앙과 후면에는 금동사로만 결합하여 장식 기능과 결합 기능을 구분하여 사용한 것으로 추정된다. 또한 제작과정에서 금동제판과 은제판의 외면에는 광쇠질한 흔적이 확인되지만, 은제판의 내면에서는 확인되지 않아 내면보다 외면의 마무리에 중점을 둔 것으로 추정된다.

• 대한치과교정학회지
• /
• 제27권5호
• /
• pp.791-800
• /
• 1997

교정치료를 목적으로 발거한 소구치 60개를 4군으로 나누고 치과용 저속 절삭기에서 $18,500{\pm}300rpm$으로 회전속도를 일정하게 하여 4가지 회전 마무리 기구(G1; No. 169L carbide fissure bur, G2; No.2 round bur, G3; No.4 round bur, G4; No.8 round bur)로 잔여 레진을 제거하고 러버컵과 pumice로 법랑질을 5초간 마무리하였을 때 법랑질 손상에 미치는 정도를 알아보기 위해 브라켓 부착전 러버컵과 pumice로 전처치한 후(P1), 각 군에 해당하는 방법으로 잔여 레진을 제거한 후(P2), 러버컵과 pumice로 마지막 마무리 후(P3)의 법랑질 표면거칠기를 표면거칠기 측정기에서 각각 측정하고 주사전자현미경하에서 관찰하여 다음과 같은 결과를 얻었다. 1. P2에서 법랑질의 표면거칠기는 G1군의 경우 $2.60{\pm}0.55{\mu}m$으로 가장 매끄럽게 나타났고 G2군의 경우 $3.24{\pm}0.80{\mu}m$, G3군의 경우 $3.44{\pm}0.94{\mu}m$으로 나타났고 G4군의 경우 $3.89{\pm}0.54{\mu}m$으로 가장 거칠게 나타났으며 G2군과 G3군은 통계학적으로 유의성이 없었다(p>0.05). 2. P3에서 법랑질의 표면거칠기는 G1군의 경우 $2.29{\pm}0.47{\mu}m$으로 가장 매끄럽게 나타났고 G2군의 경우 $2.44{\pm}0.56{\mu}m$, G3군의 경우 $2.44{\pm}0.58{\mu}m$으로 나타났고 G4군의 경우 $2.92{\pm}0.43{\mu}m$으로 가장 거칠게 나타났으며 G1군은 G2군, G3군과, G2군은 G3군과 통계학적으로 유의성이 없었다(p>0.05). 3. 모든 군에서 P2, P3는 P1보다. P2는 P3보다 표면거칠기가 거칠게 나타났다(p<0.01). 4. 아무 처치도 하지 않은 정상 법랑질에 러버컵과 pumice로 5초간 전처치한 경우 주사전자현미경관찰에서 미세한 긁힘을 발견할 수 있었고 네군 모두에서 러버컵과 pumice로 연마 후에도 제거할 수 없는 흠을 남기며 러버컵과 pumice로 마무리 후 육안관찰시 잔여 레진을 발견할 수 없었으나 주사전자현미경하에서는 레진 잔사 등을 관찰할 수 있었다.