• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.778-782
• /
• 1996

By the use of a similar numerical method as that in the previous paper, the forming limit strain of bonded sheet metals is investigated, in which the FEM is applied and J2G(J2-Gotoh's corner theory) is utilized as the plasticity constitutive equation. Bonded two-layer sheets and sheets bonded with dissimilar sheets on both surface planes are stretched in a plane-strain state, with various work-hardening exponent n-values and thicknesses of each layer. Processes of shear-band formation in such composite sheets are clearly illustrated. It is concluded that, in the bonded state, the higher limiting strain of one layer is reduced due to the lower limiting strain of the other layer and vice versa, and does not necessarily obey the rule of linear combination of the limiting strain of each layer weighted according thickness.

• Geomechanics and Engineering
• /
• 제7권3호
• /
• pp.317-333
• /
• 2014

The study of the mechanical behavior of rockfill materials under three-dimensional loading conditions is a current research focus area. This paper presents a microscale numerical study of rockfill deformation and strength characteristics using the Combined Finite-Discrete Element Method (FDEM). Two features unique to this study are the consideration of irregular particle shapes and particle crushability. A polydisperse assembly of irregular polyhedra was prepared to reproduce the mechanical behavior of rockfill materials subjected to axial compression at a constant mean stress for a range of intermediate principal stress ratios in the interval [0, 1]. The simulation results, including the stress-strain characteristics, relationship between principal strains, and principal deviator strains are discussed. The stress-dilatancy behavior is described using a linear dilatancy equation with its material constants varying with the intermediate principal stress ratio. The failure surface in the principal stress space and its traces in the deviatoric and meridian plane are also presented. The modified Lade-Duncan criterion most closely describes the stress points at failure.

• 한국세라믹학회지
• /
• 제23권1호
• /
• pp.1-6
• /
• 1986

The shrinkage rate of solid state sintering has been theoretically derived by combining the rate equation of material transport and the net free energy change resulting from the decrease of solid-vapor interface and the increase of grain boundary during sintering. For a sinteing model an idealized situation of the spherical particles with BCC packing was taken as the initial condition and the shrinkage was assumed to occur by forming the flat circualr grain boundaries on each particle. The plotted shrinkage rates as a function of grain boundary to surface energy ratio $(gamma_g/gamma_s)$ have shown that the relative density increases linearly at the initial stage of sintering but the shrinkage rate is decreased upon further sintering due to a decrease in driving force for densificaton. It has been also shown that the densification is critically affected by the $gamma_g/gamma_s$ ratio. In order to get the complete densificatin the ratio should be less than $sqrt{3}$. Any additive or atmospheric condition causing the decrease of$_g/gamma_s$ ratio will enhance sintering.

• Archives of Pharmacal Research
• /
• 제2권1호
• /
• pp.35-47
• /
• 1979

In order to increase the dissolution rate of furosemide(4-choro-N-furfury1-5-sulfamoy1 anthranilic acid_, various ratio coprecipitates with water-soluble polymers, such as polyvinylpyrrolidone and polythylene glycol, of different molecular weight, were prepared and quantitatively studied by comparing their dissolution characteristics of furosemide at powder state and at nondisintegrating disk state containing constant surface area at various temperatures and rotating velocities. The dissolution characteristics of furosemide from pure furosemide disks and 1:2(w/w) furosemide-PVP coprecipitate disks were in accordance with Noyes-Nernst equation and the rate constant of dissolution was proportional to the square root of rotating velocity of the disks. The intrinsic rate of dissoluton at 150 rpm, 37.deg.C was $2.21{\times}10^{-7}$ for the PVP 10, 000 COPRECIPITATE, $1.64{\times}10^{-7}$ for the PVP 40, 000 coprecipitate, and$ 1.44 {\times} 10^{-7}$for the PVP 360, 000 corprecipitate, while the rate was $1.27{\times}10^{-8}M/cm^{2} min$ for pure furosemide, repectively. The activation energy of dissolution was about 17, 000 for furosemide and about 7, 300 cal/mole for the 1:2 furosemide PVP 40, 000 coprecipitate, respectively.

• Wind and Structures
• /
• 제3권1호
• /
• pp.11-21
• /
• 2000

This paper presents results of modeling of the passive contaminant diffusion from a continuous line finite-size source located on the underlying surface of a neutral near-ground atmospheric layer obtained by using the non-local two-parameteric turbulence model and the transport equation of mean concentration. In the proposed diffusion model the turbulent diffusion coefficient changes not only with the vertical coordinate but also with the distance downstream from the source according to the experimental data. The results of the modeling reproduce structural features of the concentration field.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제52권9호
• /
• pp.395-399
• /
• 2003

In this paper, physical phenomena which are related to the high temperature and high pressure arc plasma generated during the fault current interruption by SF6 gas circuit breakers are reviewed. In particular, in order to analyze nozzle ablation induced by the heats transferred to the surface of the poly-tetrafluoroethylene(PTFE) nozzle through arc radiation, a governing equation for the calculation of PTFE concentration is added to the governing equations for SF6 arc Plasma analysis. The proposed method is applied to the steady state analysis of $SF_6$ arc plasma generated by direct current taking account of the nozzle ablation and the results are presented.

• 대한의용생체공학회:의공학회지
• /
• 제16권1호
• /
• pp.67-76
• /
• 1995

Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd: YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as BrJ, and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased. To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.104-105
• /
• 2006

The low-cycle fatigue performance and fracture of the P/M Ti-Fe-Mo-Al-Nd Alloys after sintering and forging have been studied. The linear regression equation of low-cycle fatigue lifetime has been obtained; the fatigue performances are objected under two different conditions. The fatigue fracture surface is analyzed by SEM. The low-cycle fatigue behavior of the P/M titanium alloy has been discussed.

• 대한기계학회논문집A
• /
• 제39권7호
• /
• pp.653-657
• /
• 2015

표면확산계수의 활성화를 통한 실리콘-게르마늄(silicon-germanium) 양자점의 성장을 수치해석적으로 구현하였다. 실리콘 기판 위에 증착된 실리콘-게르마늄 박막의 성장을 표현하는 비선형 지배방정식을 유도하였으며, 확산계수를 온도의 함수로 고려하여 표면확산계수의 국소적 향상이 미치는 효과를 살펴보았다. 해석결과는 안정상태의 박막이 섭동될 때에 양자점이 자기조립되는 과정을 보여주며, 박막표면의 국소부위에 선택적으로 구조물이 성장하는 현상을 나타낸다. 본 연구는 바텀업(bottom-up) 방식이 내재적으로 지닌 불규칙성을 해결할 대안을 마련하여 양자기기를 위한 공정개발의 방향을 제시한다.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2006년도 춘계 종합학술대회 논문집
• /
• pp.351-355
• /
• 2006

본 연구의 목적은 모든 하천에서 표면유속만을 이용하여 유량측정을 용이하게 할 수 있는 효과적이고 유용한 측정방법을 개발하는데 있다. 본 연구로 다음과 같은 중요한 결과를 얻었다. 1) 자연하천은 엔트로피 M값에 대응하여 평형상태를 유지하는 경향이 있으며, 2) 표면유속을 이용하여 산정된 계산치와 실측을 비교한 결과 상당히 좋은 일치를 보여주었으며, 3) 하천단면에서 최대유속이 발생하는 지점에서의 표면유속을 이용하여 유량을 산정하는 공식을 개발하였으며, 실측치와 비교한 결과 그 적용성을 확인하였다.