• Journal of agricultural medicine and community health
• /
• v.36 no.4
• /
• pp.238-250
• /
• 2011

Objectives: This study was performed to investigate the service needs of the beneficiaries who had enrolled in home-based management programs for cancer patients. Methods: From March to May 2009, 676 cancer patients who were registered in home-based cancer patient management programs were selected as subjects for this study. The data were collected using a questionnaire along with a face-to-face interview performed by officers in charge of the home-based care programs of 47 regional health centers. Fifteen patients were excluded due to incomplete data, leaving 661 subjects who were ultimately enrolled in the study. Results: The mean age of subjects was $64.0{\pm}2.5$ years, and males comprised 45.1% (298/661) of the sample. The results of factor analysis for service needs showed that there were five main categories and Cronbach's alpha ranged from 0.593 to 0.890 for each factor. The service needs categories in order of importance were social support, information and education, psychological problems, physical symptoms and household chores. The service needs scores were significantly different when subjects were stratified by age, habitation, religion and disease classification. When we divided the subjects into complete remission, under treatment and terminally ill groups, the needs scores of the terminally ill patient group were significantly higher than those of the other groups (p<0.001). Conclusions: Service provision based on patient and beneficiary needs could be an effective intervention to reduce the economic burden of cancer management and to improve the quality of life of cancer patients receiving home-based care. Therefore, it is recommended that individual cancer patient care programs be developed and administered according to patient age, habitation and disease severity.

• Journal of the Economic Geographical Society of Korea
• /
• v.14 no.4
• /
• pp.467-485
• /
• 2011

After Korean War, Korea focused on catching up with the world economy by concentrating on some target industries around the Capital Region and southern coastal cities. Thus, the regional disparity between Capital Region and non-Capital Regions increased drastically. At last, when Korea acquired full-fledged autonomy in 1994 in the Civilian government (1993-1998) and experienced the Asian financial crisis in 1997-1998, local governments were awakened to the notion of region-oriented development, especially for regional industrial development. The purposes of this paper are to introduce regional industrial development policies since 1998 and to suggest some recommendations in terms of how to adjust regional development for industrial policies in the future. In the introducing phase (Kim administration, 1998-2003), four provincial governments requested national funding to raise regional industries that are of strategic importance. At the same time, the central government recognized the need to nurture regional industries to overcome structural weaknesses. As a result, the Roh administration (2003-2008) gave a birth to a systematizing phase. As the ultimate regional policy objective, the balanced national development has been set and the Special Acts, Special Accounts, Committee, and National Plan have been established. Regional Industrial Promotion Project has been carried out very actively during this period. It had a good start albeit idealistic to a certain extent. Therefore, the current government has changed policy paradigm from balanced growth to regional competitiveness along with global paradigm shifts. In order to enhance regional competitiveness, regional development policies have been pursued in more efficient way. Leading Industry Nurturing Projects (LINPs) on Economic Region level, existed Regional Industrial Promotion Projects (RIPPs) on Province level, and Region Specific Industry Projects (RSIPs) on Local Area level have been implemented. Now, it is appropriate to review regional development policies including industrial policies since 1998 and to adjust them for the future sustainable regional development. Because LINPs and RIPPs will be terminated in next two years, the 2nd stage projects are on planning to reduce the redundancies in two projects. In addition, business support program would be reformed from subsiding technology development to building ecological business system. Finally some policy implications are provided in this paper, which is useful to establish the new regional industrial policies for both central and local government.

• Information Systems Review
• /
• v.14 no.1
• /
• pp.85-103
• /
• 2012

ISMP is a method of writing clearly the user requirements in the RFP(Request for Proposal) of the IS development projects. Unlike the conventional methods of RFP preparation that describe the user requirements of target systems in a rather superficial manner, ISMP systematically identifies the businesses needs and the status of information technology, analyzes in detail the user requirements, and defines in detail the specific functions of the target systems. By increasing the clarity of RFP, the scale and complexity of related businesses can be calculated accurately, many responding companies can prepare proposals clearly, and the level of fairness during the evaluation of many proposals can be improved, as well. Above all though, the problems that are posed as chronic challenges in this field, i.e., the misunderstanding and conflicts between the users and developers, excessive burden on developers, etc. can be resolved. This study is a case study that analyzes the execution process, execution accomplishment, problems, and the success factors of two pilot projects that introduced ISMP for the first time. ISMP performance procedures of actual site were verified, and how the user needs in the request for quote are described was examined. The satisfaction levels of ISMP RFP for quote were found to be high as compared to the conventional RFP. Although occurred were some problems such as RFP preparation difficulties, increased workload, etc. due to the lack of understanding and execution experience of ISMP, in overall, also occurred were some positive effects such as the establishment of the scope of target systems, improved information sharing and cooperation between the users and the developers, seamless communication between issuing customer corporations and IT service companies, reduction of changes in user requirements, etc. As a result of conducting action research type in-depth interviews on the persons in charge of actual work, factors were derived as ISMP success factors: prior consensus on the need for ISMP, the acquisition of execution resources resulting from the support of CEO and CIO, and the selection of specification level of the user requirements. The results of this study will provide useful site information to the corporations that are considering adopting ISMP and IT service firms, and present meaningful suggestions on the future study directions to researchers in the field of IT service competitive advantages.

• Journal of dental hygiene science
• /
• v.13 no.3
• /
• pp.271-280
• /
• 2013

This study aims to analyze the effects of tooth-brushing facilities (TBF) at middle schools that installed TBF in 2012 as part of the oral health project in Seongdong-gu, Seoul. The subjects were the first graders at A middle school that installed TBF previously and B middle school that installed TBF in 2012. The results are as follows: DMFT, DMFS and CPI didn't show significant difference by schools (p>0.05), but code (0) was higher and code (2) was lower in female students than male students (p<0.05). As to PHP index, the students at A school with TBF indicated better oral hygiene (p<0.01). In the research on before and after installing TBF, the oral hygiene was improved significantly more after the installation than before (p <0.01). In the comparison on the oral health-related behavior, the percentage of not brushing after lunch was higher B school than A school and the frequency of toothbrushing after lunch was higher A school than B school (p<0.01). About the reasons why not to brush after lunch, there was difference in 'lack of the place' as A school showed 2.6% while B school without TBF indicated 14.2% (p<0.01). About the changes of the oral health-related behavior before and after TBF installation, the percentage of not brushing after lunch increased from 78.7% to 83.8% after the installation. The average frequency of tooth-brushing after lunch for one week also decreased from 0.50 to 0.34 (p>0.05). Among the reasons why not to brush after lunch, 'lack of the place' significantly reduced, but 'because other friends don't do it' increased greatly after the installation (p <0.05). Only with the improvement of oral health knowledge, we cannot expect either clinical or behavioral significance. Not only schools but policies of governmental agencies and financial support, cooperation of community-related groups for program development and evaluation will contribute altogether to helping teenagers to habitualize proper oral health management.

• Clean Technology
• /
• v.26 no.2
• /
• pp.151-157
• /
• 2020

Rapid urbanization has elevated the risk of urban flooding due to the increase in the impervious surface, causing environmental disasters and environmental pollution problems, such as lowering the groundwater level and increasing water pollution. In Korea, low impact development (LID) techniques have been introduced to minimize these environmental impacts and maintain the water cycle soundness. However, most small-scale development projects are in blind spots because there is no legal basis for rainfall runoff management. Small-scale development projects that increase the surface runoff of rainwater are required to mandate the application of LID facilities in accordance with the polluters' responsibility principle. Therefore, it is necessary to implement a preliminary consultation system for water cycle recovery. This study focuses on the cost-benefit analysis on the application of LID techniques for small-scale development projects. The scale of nationwide small-scale development projects used for cost-benefit analysis were defined as buildings with a land area of more than 1,000 ㎡ or a total floor area of 1,500 ㎡. As a result of analyzing the cost-benefits from the installation of LID facilities, they were found to be much lower than the economic standard value of 1. This might be due to the high cost of facilities compared to the scale of the project. However, considering the overall environmental value of improving the water environment and air quality by the installation of LID facilities and the publicity of reducing the operating cost of sewage treatment facilities, the introduction of a prior consultation for small-scale development projects is inevitable. In the future, institutional and financial support from local governments is required to improve the cost-benefits with the introduction of a prior consultation for small-scale development projects.

• Journal of dental hygiene science
• /
• v.12 no.6
• /
• pp.572-582
• /
• 2012

The purpose of this research was to compare the oral health behaviors for children and teachers in toothbrushing facilities installed community child center related with teacher-supervised toothbrushing. This research was follow-up study from the Korean Dental Hygienists Association third project '2010 program of making of the diamond tooth'. 266 child support teachers were invited and 201 were included in the study (response rate: 75.6%). Statistical analysis conducted using PASW ver. 18.0 for Windows. The difference on the distribution of independent variables related with teacher-supervised toothbrushing was verified with chi-square test. The results of this research could be summarized as follows: The children in the teacher-supervised toothbrushing community child center, the practice rate of toothbrushing was higher than the children in the non-supervised toothbrushing community child center (p<0.05). Teachers offered children one of snacks and drinks per day independently of teacher-supervised toothbrushing (p>0.05). Most of participated teachers accepted to be responsible for oral health of children (73.4%) and demanded that improve facilities for a toothbrushing in community child center (77.2%). In conclusion, this study suggests that a programme of daily teacher-supervised toothbrushing can be effectively targeted into community child center.

• Korean Journal of Remote Sensing
• /
• v.26 no.5
• /
• pp.477-487
• /
• 2010

In North Korea, forests were intensively degraded by forest land reclamation for food production and firewood collection since the mid-1970s. These degraded forests have to be certainly recovered for economic support, environmental protection and disaster prevention. In order to provide detailed land cover information of forest recovery project (A/R CDM), this study was focused to develop an improved classification method for degraded forest using 2.5m SPOT-5 pan-sharpened image. The degraded forest of North Korea shows various different types of texture. This study used GLCM texture bands of segmented image with spectral bands during forest cover classification. When scale factor 40/shape factor 0.3 was used as a parameter set to generate segment image, segment image was generated on suitable segment scale that could classify types of degraded forest. Forest land cover types were classified with an optimum band combination of Band1, Band2, band3, GLCM dissimilarity (band2), GLCM homogeneity (band2) and GLCM standard deviation (band3). Segment-based classification method using spectral bands and texture bands reached an 80.4% overall accuracy, but the method using only spectral bands yielded an 70.3% overall accuracy. As using spectral and texture bands, a classification accuracy of stocked forest and unstocked forest showed an increase of 23~25%. In this research, SPOT-5 pan-sharpened high-resolution satellite image could provide a very useful information for classifying the forest cover of North Korea in which field data collection was not available for ground truth data and verification directly. And segment-based classification method using texture information improved classification accuracy of degraded forest.

• Korean Journal of Social Welfare Studies
• /
• v.44 no.3
• /
• pp.371-393
• /
• 2013

The objective of this article is to compare the characteristics and the origin of Welfare State in Korea and France. This study also finds out the causes of underdevelopment of Welfare State in Korea. In the third Republic of France, the first Industrial Accident Compensation Law was legislated in 1898. The discussion of the project of Law commenced in 1880. The Parliamentary Debate on the legislation of the Law had continued for 18 years. The leaders of the debate was the group of progressive Republicans(Radicals) in the French Parliament. In Korea, it was also in the period of the third Repulic, the President and several members of the Supreme Committee of National Reconstruction (Guk-Ga-Jai-Gun-Choi-Go-Ho-Eui), the authoritative military government who enacted and developed the Social Insurance Law of Industrial Accident Compensation, the first Law of Welfare State in Korea. However, Korea and France show more differences than similarities in the terms of the origin of the Welfare State. The motivations and goals of social policies of the two countries were quite different at the beginning stage. In France, the progressive Republicans of Parliament made welfare state policies in order to maintain the politico-social hegemony and social peace by provision of economic supports to workers. In Korea, the group of military officers had begun the welfare legislation in order to win the general election and obtain political power in 1963. Comparison on the origins of the welfare states in the two countries shows similarities as well as differences in terms of the role of actors. In France, the state and the owners of big enterprises had agreed and played positive roles in the legislation of the welfare state policies. However, the owners of small companies, merchants and farmers had played negative roles. Like the French case, Korean government and owners of big enterprises had played positive roles. The state as a major actor of the legislation of the social insurance programs in the two countries are slightly different. In Korea, the owners of small companies had played negative roles in making of medical insurance programs in 1976. Comparison of the current state of two welfare states shows substantial differences in terms of the development of the welfare state. What is the reason for such differences? Why does Korean Welfare State underdevelop? Historically, the developmentalism as an major ideology of the third Republic of Korea has continually influenced the underdevelopment of the Welfare State. It implies that Koreans have to invent a new ideology of Welfare State which can replace the developmentalism and support the development of Welfare State in the future. Without such a new ideology, it is very difficult to develop an european style welfare state in Korea.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.4
• /
• pp.347-355
• /
• 2021

During the earthquake, for multi-story structure, if the first floor is soft, the deformation will concentrate on that floor causing a serious damage to the column members which might leads to the collapse of the whole structure like Piloti structure during the Pohang earthquake in Korea. According to the 2016 National Disaster Management Research Institute's "Investigation of Seismic Reinforcement and Cost Analysis of Domestic Non-seismic Buildings", the rate of seismic resistance of private reinforced concrete buildings was 38.3 %. Among them, it was reported that the seismic-resistance ratio of the two to five-story structures was less than 50 %. Accordingly, the government is trying to improve the seismic rate through support projects, but the conventional seismic reinforcement methods are still expensive, and emergency construction is difficult. Therefore, in this study, the field applicability was evaluated by improving the reinforcement method using Velcro, which was developed through the research project of the Ministry of Land, Transport and Maritime Affairs in 2014. In order to improve the performance of the Velcro reinforcement method, introducing the initial tension of Velcro using high foaming rigid urethane filling between the Velcro and concrete of the columns was applied. Additionally, an experiment was conducted to evaluate the ductility of Velcro specimen from the concrete confinement effect. As a result, the ductility of the Velcro specimen was improved compare to Normal specimen. However, the energy dissipation capacity of VELCRO2 is better than VELCRO1, yet the maximum ductility of those two specimens did not show a significant difference. Therefore, the improvement of the internal filler material is still needed to have a better maximum ductility.

• Korean Journal of Construction Engineering and Management
• /
• v.20 no.4
• /
• pp.22-33
• /
• 2019

The government has steadily revised and developed laws and systems for activating remodeling of apartments in response to the problems of aged apartments. However, despite such efforts, remodeling has yet to be activated. For many reasons, this study noted that there were no tools for reasonable profitability judgements and decision making in the preliminary stages of the remodeling project. Thus, the feasibility evaluation model was developed. Generally, the profitability judgements are made after the conceptual design. However, decisions to drive remodeling projects are made at the preliminary stage. So a feasibility evaluation model is required at the preliminary stage. Accordingly, In this study, a feasibility evaluation model was developed for determining preliminary stage profitability. Construction costs, business expenses, financial expenses, and generally sales revenue were calculated using the initial available information and remodeling variables derived through the existing cases. Through this process, we developed an algorithm that can give an overview of the return on investment. In addition, the preliminary stage feasibility evaluation model developed was applied to three cases to verify the applicability of the model. Although applied in three cases, the difference between the model's forecast and actual case values is less than 5%, which is considered highly applicable. If cases are expanded in the future, it will be a useful tool that can be used in actual work. The feasibility evaluation model developed in this study will support decision making by union members, and if the model is applied in different regions, it will be expected to help local governments to understand the size of possible remodeling projects.