• Journal of The Korean Society of Agricultural Engineers
• /
• v.59 no.5
• /
• pp.73-81
• /
• 2017

The improved movable weir supplements the advantages and disadvantages of the rubber weir and the conduction gate. It consists of a stainless steel gate, air bags, and a steel clamping plate. The stainless steel gate is the main body of the weir, and the inflatable rubber sheet serves to support the steel gate. The steel clamping plate is typically in direct continuous contact with water, but this leads to corrosion issues that can reduce the life of the entire movable weir. In this study, a panel-type glass-fiber-reinforced polymer (GFRP) clamping plate was designed and fabricated. The test results showed that the flexural load of the panel-type GFRP composite clamping plate was over twice that of the wings type GFRP clamping plate. The lowest moisture absorption value was obtained upon exposure to tap water, and exposure to other solutions showed similar values. Additionally, flexural load testing after exposure to an accelerated environment found the lowest residual loads of 80.51 % and 78.50 % at 50 and 100 days, respectively, for exposure to a $CaCl_2$ solution, while exposure to other environments showed residual failure loads of over 80 % at both 50 and 100 days.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.3
• /
• pp.45-54
• /
• 2009

This study was developed the metallic plate for bone fixation in the neurosurgery and general surgery and plates has a finn place in bone operating and treatment. The plates can be realized to bending strength and stiffness for strength estimation. Maximum point of bending curves has a bending point(P) with maximum load which to applied nearly 0.2% offset displacement. The device's sizing has a ${\Phi}13$ and ${\Phi}18$, and algorithm of strength estimation compared a plate(${\Phi}13$, ${\Phi}18$, ${\Phi}13-{\Phi}18$). The bending strength of the curved metallic plate has to evaluate maximum of a 311N, 387N, 410N, 474N. When a displacement preserve with a load, tensile stress through to press a plate is 274N, 324N, 382N, 394N. The algorithm of strength estimation can be used to support estimation of bending strength and stiffness. Their tool bring to settlement in the new basic algorithm for evidence with varied adjustment.

• Nutrition Research and Practice
• /
• v.15 no.5
• /
• pp.655-671
• /
• 2021

BACKGROUND/OBJECTIVES: While plate waste has been widely investigated in hospitals, there have been minimal studies specific to the texture-modified diet (TMD). This study aims to determine the percentage of plate waste among patients prescribed with TMD and its contributory factors. SUBJECTS/METHODS: This was a single-centre study conducted in the university hospital on three types of TMD (blended diet, mixed porridge, minced diet) during lunch and dinner meals. Weighing method and visual estimation method assisted by digital photograph were adopted in this study. Face to face interview was carried out to investigate on 1) the food/food service quality factors in terms of patients' satisfaction level towards sensorial quality of food and food services provided and 2) the clinical/external factors including appetite, the provision of oral nutrition support, time taking the diet, the need for feeding assistance and the length of hospital stay. RESULTS: The mean percentage of overall plate waste of 95 patients receiving TMD was high (47.5%). Blended diet was identified as the most wasted diet (65%) followed by minced diet (56%) and mixed porridge (35%). Satisfaction level among patients was moderate. Patients on TMD in general had higher satisfaction level on the aspect of food service as compared to food quality. Substantial association between sensorial qualities of food and plate waste were varied according to individual TMD type. A multiple linear regression showed that only the satisfaction level toward the aspects of appearance and variety of foods were the predictors of TMD plate waste (R² = 0.254, P < 0.05). CONCLUSIONS: A significant relationship between the percentage of plate waste and the overall satisfaction level of patients receiving TMD suggests that vigorous strategies are needed to reduce the food waste of TMD which will lead to a better nutritional status and clinical outcomes among the patients.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.06a
• /
• pp.763-764
• /
• 2008

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 1999.04a
• /
• pp.163-167
• /
• 1999

• Journal of the Korean Society of Systems Engineering
• /
• v.4 no.2
• /
• pp.1-13
• /
• 2008

The development of hull curved plate forming automation system in ship production field begins from the need of stakeholders such as enterprise organization, who need the reduction of cost and time and improvement of productivity, and end users who work for this production process. Even though hull curved plate forming automation system has small scale, it is reasonable to consider the system as an interdisciplinary system, because the system includes all of hardware, software, human and information and has a specified objective to be performed. In this paper, introduction of 4 leading Model-Based Systems Engineering (MBSE)methodologies is described and SysML(Systems Modeling Language), which is designed to analyze, specify, design, and verify complex systems, is introduced in order to support those methodologies. Especially, SysML is applied to system modeling of hull curved plate forming automation system and focused on. The structure diagrams and behavior diagrams based on operational context of the automation system are used to make system architecture. The performed application of SysML to the hull curved plate forming automation system shows an example of applying SysML to the development of other autonomous systems in ship production domain.

• Geomechanics and Engineering
• /
• v.5 no.3
• /
• pp.187-194
• /
• 2013

The most soil anchor works have been concerned with the uplift problem on embedded in non-reinforced soils under pullout test. Symmetrical anchor plates are a foundation system that can be resisting tensile load with the support of around soil in which symmetrical anchor plate is embedded. Engineers and authors proved that the uplift response can be improved by grouping the symmetrical anchor plates, increasing the unit weight, embedment ratio and the size of symmetrical anchor plates. Innovation of geosynthetics in the field of geotechnical engineering as reinforcement materials found to be possible solution in symmetrical anchor plate responses. Unfortunately the importance of reinforcement in submergence has received very little attention by researchers. In this paper, provision of tensile reinforcement under embedded conditions has been studied through uplift experiments on symmetrical anchor plates by few researchers. From the test results it has been showed that the provision of geogrid reinforcement system enhances the uplift response substantially under uplift test although other results are such as increase the ultimate uplift response of symmetrical anchor plate embedded using geosynthetic and Grid Fixed Reinforced (GFR) and symmetrical anchor plate improvement is very dependent on geosynthetic layer length and increases significantly until the amount of beyond that further increase in the layer length does not show a significant contribution in the anchor response.

• Journal of Surface Science and Engineering
• /
• v.41 no.2
• /
• pp.76-82
• /
• 2008

We investigated sterilization characteristics of UV lights by counting the number of bacteria units with varying sterilization time and distance from the light source. We focused on an idea that UV light of 184.9 nm could generate ozone and developed a new sterilizer. The UV-ozone duplex system sterilized bacteria faster than UV-only sterilizers. To reduce shadowing effects by target objects, we used UV transparent quartz plate as a support and put a reflecting plate. Distribution of UV irradiation intensity and ozone supply were analyzed by a 3D model and measured by a semiconductor UV sensor. But even with an Al reflector, multi-layered pens could not be treated properly from UV irradiation only. Ozone generating lamp could treat more uniformly multi-layered pens with a stirring fan by supplying ozone to shadowed surfaces.

• International journal of steel structures
• /
• v.18 no.4
• /
• pp.1297-1305
• /
• 2018

The corrugated steel plate shear walls have recently been proposed to address the seismic issues associated with simple steel plate shear walls; however, stiffness, strength, and ductility of the corrugated shear walls are significantly affected by varying the corrugation geometry under seismic loading. The present study investigates steel shear walls' models with corrugated or simple infill plates subjected to monotonic and cyclic loads. The performance of the corrugated steel plate is evaluated and then compared to that of the simple steel plates by evaluating the damping ratios and energy dissipation capability. The effect of corrugation profile angle, the existence of an opening, and the corrugation subpanel length are numerically investigated after validation of the finite element modeling methodology. The results demonstrate that incorporating corrugated plates would lead to better seismic damping ratios, specifically in the case of opening existence inside of the infill plate. Specifically, the corrugation angle of $30^{\circ}$ decreases the ultimate strength, while increasing the initial stiffness and ductility. In addition, the subpanel length of 100 mm is found to be able to improve the overall performance of shear wall by providing each subpanel appropriate support for the adjacent subpanel, leading to a sufficient buckling resistance performance.

• Steel and Composite Structures
• /
• v.49 no.6
• /
• pp.713-728
• /
• 2023

This paper aims to investigate the free vibration analysis of FG plates, taking into account the effects of even and uneven porosity. The study employs the Hellinger-Reisner functional and obtains the element's bending stress and membrane stress fields from the analytical solution of the governing equations of the thick plate and plane problem, respectively. The displacement field serves as the second independent field. While few articles on free vibration analysis of circular plates exist, this paper investigates the free vibration of both rectangular and circular plates. After validating the proposed element, the paper investigates the effects of porosity distributions on the natural frequency of the FG porous plate. The study calculates the natural frequency of thin and thick bending plates with different aspect ratios and support conditions for various porosity and volume fraction index values. The study uses three types of porosity distributions, X, V, and O, for the uneven porosity distribution case. For O and V porosity distribution modes, porosity has a minor effect on the natural frequency for both circular and rectangular plates. However, in the case of even porosity distribution or X porosity distribution, the effect of porosity on the natural frequency of circular and rectangular plates increases with an increase in the volume fraction index.