• Annual Conference on Human and Language Technology
• /
• 2004.10d
• /
• pp.151-156
• /
• 2004

여러 개의 절로 이루어진 긴 문장에서 절 단위를 인식해냄으로써 구문분석의 복잡도를 크게 줄일 수 있다. 본 논문에서는 SVM 모델을 이용하여 한국어 문장에서 절의 경계를 인식하는 방법을 제안하였다. 첫 번째 단계로 중심어가 후행하는 한국어 문장의 특성을 고려하여 절의 끝점을 먼저 찾고, 첫 번째 단계의 결과인 절의 끝점 정보와 절의 끝점 인식을 위한 정보보다 더 전역적인 정보를 이용해 절의 시작점을 인식하는 두 번째 단계로 나누어 진행하였다. 구문구조 부착 말뭉치를 이용하여 학습하고 실험한 결과, F-score 86.87%와 단어 단위의 정확도 96.63%의 성능을 나타내었다.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.151-152
• /
• 2006

Multi-hop system has advantage of low power consumption, improved cell capacity, and enlarged service coverage. Most of previous researches show that multi-hop relaying beyond dual-hop relaying does not improve system performance significantly. This leads most researches are focused on dual-hop relaying system. In this paper, we propose an optimal boundary condition to support maximal data rate for fluctuation of traffic load in single cell dual-hop relay system.

• Korean Journal of Computational Design and Engineering
• /
• v.7 no.4
• /
• pp.211-218
• /
• 2002

Swept volumes have been used in a wide variety of applications, and the literature contains much discussion of methods for computing the swept volumes in many situations. However, the commercially available CAD systems do not support the operations of generating the swept volumes enough to satisfy a variety of users' needs. In this paper, we present a new, simple and efficient algorithm for computing the swept volume of moving a polyhedron in 3-D region. The screw motion is used to describe the sweep motion of a polyhedron, because of its simplicity and computational advantages. The boundary of a swept volume is the result of combining the envelope surfaces and the partial boundaries at the initial and final position of a polyhedron. Some portions of these boundaries are inside the swept volume. We develop the algorithm to remove these interior portions. Then, to implement our algorithm, it is performed to integrate our program with the commercial CAD software, CATIA.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2000.11a
• /
• pp.220-223
• /
• 2000

A method of calculating the natural frequency corresponding to the modes of vibration of beams and tower structures, with irregular cross sections and with arbitrary boundary conditions was developed and reported by Kim, D. H. in 1974. In this paper, the result of application of this method to the three span continuous reinforced concrete bridge with elastic intermediate supports is presented. Such bridge represents either concrete or sandwich type three span bridge on polymeric supports for passive control or on actuators for active control The concrete slab is considered as a special orthotropic plate. The influence of the modulus of the foundation and $D_{22}$, $D_{12}$, $D_{66}$ stiffnesses on the natural frequency is thoroughly studied.

• Advanced Composite Materials
• /
• v.17 no.2
• /
• pp.177-190
• /
• 2008

As the first step in discussing the reliability of composite structures, a fundamental study was performed to obtain the scattering characteristics of glass-fiber reinforced plastics (GFRP) and woven carbon fiber reinforced plastics (WCFRP) as well as a reference metal. The Euler buckling load was obtained experimentally for each material. The experiments were conducted for specified rectangular specimens with simply supported edges. A new attachment to realize the simply support boundary conditions for composite materials have been prepared before these experiments. The scattering data in the results for GFRP and WCFRP composites were compared with those of a typical metal of aluminum alloy. The experimental data were also compared with numerical simulations including the uncertainties.

• Structural Engineering and Mechanics
• /
• v.33 no.6
• /
• pp.747-763
• /
• 2009

In this work, the linear vibration characteristics of $90^{\circ}$ pipe bends and their cylindrical and toroidal shell components are studied. The finite element method, based on shear-deformation shell elements, is used to carry out a vibration analysis of metallic multiple $90^{\circ}$ mitred pipe bends. Single, double, and triple mitred bends are considered, as well as a smooth bend. Sample natural frequencies and mode shapes are given. To validate the procedure, comparison of the natural frequencies is made with existing results for cylindrical and toroidal shells. The influence of the multiplicity of the bend, the boundary conditions, and the various geometric parameters on the natural frequency is described. The differential quadrature method, based on classical shell theory, is used to study the vibration of components of these bends. Regression formulas are derived for cylindrical shells (straight pipes) with one or two oblique edges, and for sectorial toroidal shells (curved pipes, pipe elbows). Two types of support are considered for each case. The results given provide information about the vibration characteristics of pipe bends over a wide range of the geometric parameters.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.12
• /
• pp.125-130
• /
• 2016

Automatic quality inspection by computer vision can be applied and give a solution to the pharmaceutical industry field. Pharmaceutical capsule can be easily affected by flaws like dents, cracks, holes, etc. In order to solve the quality inspection problem, it is required computationally efficient image processing technique like thresholding, boundary edge detection and segmentation and some automated systems are available but they are very expensive to use. In this paper, we have developed a dented capsule image processing technique using edge-based image segmentation, TLS(Total Least Squares) curve fitting technique and adopted low cost camera module for capsule image capturing. We have tested and evaluated the accuracy, training and testing time of the classification recognition algorithms like PCA(Principal Component Analysis), ICA(Independent Component Analysis) and SVM(Support Vector Machine) to show the performance. With the result, PCA, ICA has low accuracy, but SVM has good accuracy to use for classifying the dented capsule.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.54 no.6
• /
• pp.417-422
• /
• 2005

This paper presents an EMG pattern classification method to identify motion commands for the control of the artificial arm by SOM-TVC(self organizing map - tracking Voronoi cell) based on neural network with a feature parameter. The eigenvalue is extracted as a feature parameter from the EMG signals and Voronoi cells is used to define each pattern boundary in the pattern recognition space. And a TVC algorithm is designed to track the movement of the Voronoi cell varying as the condition of additive noise. Results are presented to support the efficiency of the proposed SOM-TVC algorithm for EMG pattern recognition and compared with the conventional EDM and BPNN methods.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.11
• /
• pp.2684-2693
• /
• 1993

The free vibration and dynamic response of cross-ply for CFRP and GFRP laminated circular cylindrical shells under dynamic loadings are investigated by using the first-order shear deformation shell theory. The modal analysis technique is used to develop the analytical solutions of simply supported cylindrical shells under dynamic load. The analysis is based on an expansion of the loads, displacements and rotations in a double Fourier series which satisfies the and boundary conditions of simply support. Analytical solution is assumed to be separable into a function of time and a function of position. In this paper, the considered load forces are step pulse, sine pulse, triangular(1, 2, 3) pulse and exponential pulse. The solution for a given loading pulse can be found by involving the convolution integral. The results show that the dynamic response are governed primarily by the natural period of the structure.

• Journal of the Korean Institute of Rural Architecture
• /
• v.10 no.2
• /
• pp.17-26
• /
• 2008

There are many problems for the rural old peoples who to use the rural houses practically with physical and mental disabilities to make use of them because the rural houses have a tendency to look alike the urban houses. Today the rural old peoples are treated distantly by the boundary of national reserved power to make and activate their facilities, the shortness of their economically surplus power and the absence nationally social security system in spite of their physical and mental disabilities. So it is necessary for us to remodel symmetrically their rural houses to fit their physical and mental disabilities to spend comfortable living and to develop structure remodeling programs and space reorganization programs of the rural handicapped old peoples' houses to support independent life to correspond with their physical and mental disabilities.