• Korean Journal of Environmental Agriculture
• /
• v.26 no.4
• /
• pp.306-312
• /
• 2007

To investigate the effect of N fertigation on the growth, yield, and water and nitrogen use efficiencies during tomato cultivation, seedlings were transplanted in a sandy loam soil under plastic film house condition. 0, 88, 132, 176, $220\;kg\;ha^{-1}$ N rates, which correspond to 0 (NF0), 40 (NF40), 60 (NF60), 80 (NF80), 100% (NF100) N level of soil test-based N fertilization, were injected weekly through drip irrigation system for 15 weeks in N fertigation system, and the control (conventional N treatment) was installed for comparison. Herein, nitrogen was applied by top-dressing with 60% as a basal and 40% as additional fertilizer. There was little different in stem diameter growth among N fertigation treatments, but plant height and dry matter increased with increasing N fertigation rates as well as in N conventional treatment. Tomato yield was increased with increasing the number of marketable fruits in N fertigation treatments, and the fruit yield was maximized in NF 80 treatment ($176\;kg\;ha^{-1}$ N supply or $96.6\;mg\;L^{-1}$ N injection). Dry matter productivity and nitrogen uptake amount were significantly increased with increasing N fertigation rates. The ratio of fruits to the dry weight of whole plant was decreased with increasing N fertigation rates, but this ratio was $2.6{\sim}5.3%$ higher in N fertigation treatments than in the control. In addition, the ratios of nitrogen distributed toward fruits in N fertigation treatments were $3.7{\sim}21.7%$ higher than that of control. The apparent N recovery percentages showed significantly higher values as $71.8{\sim}102.3%$ in N fertigation treatments, compared to 45% in N conventional treatment. Water use efficiency was significantly increased by fertigation system with the maximum $361\;kg/ha\;cm^{-1}$ in NF 80, which is comparable to $324\;kg/ha\;cm^{-1}$ of the conventional treatment. Conclusively, N fertigation system was effective on increasing tomato productivity and nutrient efficiency as well as 20% reduction of N fertilization level.

• Journal of Bio-Environment Control
• /
• v.27 no.4
• /
• pp.363-370
• /
• 2018

The succulent plants of Echeveria genus are in increasing demand worldwide, but it is difficult to supply good quality young plants throughout the year because propagation efficiencies are depend on cultivar and environmental factors. This study was carried out to investigate the propagation efficiencies of leaf cutting in Echeveria cultivars at different LED light qualities in a closed-type plant factory system. Leaf cuttings cut from stock plants of six difficult-to-propagated cultivars 'Afterglow (AG)', 'Berkeley Light (BL)', 'Mason (MS)', 'Subsessilis Light (SL)', 'Cream Tea (CT)', and 'Ben Badis (BB)' were put into cutting media in the plant factory system maintained at a temperature of $24{\pm}2^{\circ}C$ and relative humidity of $60{\pm}10%$, and watered with over-head irrigation twice a week. Cuttings were irradiated with sole or mixed red (R, 660 nm), blue (B, 450 nm), green (G, 530 nm), and far-red (FR, 730 nm) LEDs as follows: R10, R8+B2, R5+B5, R7+B2+FR1, and R7+B2+G1. PPFD just above the cuttings was $200{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ and photoperiod was 16/8 (light/dark) hours. As a result, propagation efficiencies were dependent on cultivar. Rooting and shooting were relatively easy in 'SL' but shoot formation in 'AG' was very difficult. Light qualities from LEDs also affected plant regeneration. Light conditions with a higher ratio of B, R5+B5, R7+B2+FR1, and R7+B2+G1, promoted shoot formation and growth but inhibited rooting and root growth. R10 and R8+B2 with a higher ratio of R promoted rooting and root growth and inhibited shoot formation and growth of cuttings. In addition, the treatment with FR increased leaf size and biomass of the all plants. Therefore, further studies are needed to investigate the optimum compositions of LED light quality for the improvement of leaf cutting efficiency in difficultto-propagated Echeveria cultivars.

• Journal of Life Science
• /
• v.17 no.6 s.86
• /
• pp.836-840
• /
• 2007

This study was conducted to investigate mineral contents of commercial powdered infant formula for obtaining basic data on infant nutrition. 11 Commercial infant formula based on cow's milk were collected and the contents of macro minerals (calcium, phosphorous, sodium, potassium and magnesium) and trace minerals (iron, zinc and copper) were compared with Dietary Reference Intakes for Koreans (KDRIs). The overall mineral contents in 100 g and in 100 kcal of infant formula satisfied the recommended formula regulation and Codex. In infant formula during 0-5 monthly age, calcium, phosphorous, sodium, potassium, magnesium, zinc and copper could supply 233.1%, 273.5%, 156.7%, 142.0%, 150.8%, 209.3%, 171.1% of recommended daily mineral intakes, respectively. The content of iron in 0-5 monthly age formula supplied2842.6% of recommended daily iron intakes. In infant formula during 6-11 monthly age, calcium, phosphorous, potassium, magnesium, iron, zinc and copper satisfied their recommended daily intakes. However, sodium only supplied 76.6% of its recommended daily intake. Intake ratio between Ca/P, Ca/Mg, Ca/Fe, Na/K and Zn/cu in infant formula during 0-5 monthly age were 1.7±0.2, 11.0±2.4,64.9±10.0, 0.3±0.1, and 9.6±1.0, respectively. Intake ratio between Ca/P, Ca/Mg, Ca/Fe, Na/K and Zn/cu in infant formula during 6-11 monthly age were 1.7${\pm}$0.2, 12.9${\pm}$1.5, 80.1${\pm}$13.8, 0.3, and 9.4${\pm}$1.1,respectively. From this study, evaluation of mineral contents of commercial infant formula was established, which could strengthen the basic information on infant nutrition.

• The Korean Journal of Blood Transfusion
• /
• v.29 no.3
• /
• pp.262-272
• /
• 2018

Background: Massive hemorrhage due to trauma is one of the major causes of death in trauma patients, and the quick supply of appropriate blood products is critical in order to reduce the mortality rate. We introduced a massive transfusion protocol (MTP) for safe and rapid transfusion of trauma patients. Using records collected since its adoption, we compared the characteristics of MTP applied group (MTP group) and MTP not applied group (non-MTP group) to determine whether there is an indicator for predicting patients to be treated with MTP. Methods: We retrospectively reviewed the electronic medical records and laboratory findings of patients who received massive transfusions in the trauma emergency room of a single tertiary hospital from February to August 2018. We analyzed various laboratory test results, the amount and ratio of the transfused blood products, and the time required for blood products to be released for the MTP group and the non-MTP group. Results: Of the 54 trauma patients who received massive transfusions, 31 were in the MTP group and 22 in the non-MTP group. There was no significant difference in initial vital signs (except blood pressure) and laboratory test results. Also there was no difference in the amount and ratio of blood products, but the time required for blood product release was shorter in the MTP group. Conclusion: There was no significant difference in clinical findings such as initial vital signs and laboratory test results between the MTP and non-MTP groups, but required blood products were prepared and released more quickly for the MTP group.

• Journal of Navigation and Port Research
• /
• v.46 no.4
• /
• pp.375-384
• /
• 2022

The shipping industry is cyclically impacted by complex variables such as various economic indicators, social events, and supply and demand. The purpose of this study was to analyze the operating profit of 13 Korean liner companies over 30 years, including the financial crisis of the late 1990s, the global financial crisis of the late 2000s, and the COVID-19 global pandemic. This study was conducted to also identify factors that impacted the profit ratio of Korea's liner shipping companies according to economic conditions. It was divided into ocean-going and short-sea shipping, reflecting the characteristics of liner shipping companies, and was analyzed by hierarchical multiple regression analysis. The time series data are based on the Korean International Financial Reporting Standards (K-IFRS) and comprise seaborne trade volume, fleet evolution, and macroeconomic indicators. The outliers representing the economic downturn due to social events were separately analyzed. As a result of the analysis, the China Container Freight Index (CCFI) positively impacted ocean-going as well as short-sea liner shipping companies. However, the Korean container shipping volume only impacted ocean-going liners positively. Additionally, world and Korea's GDP, world seaborne trade volume, and fuel price are factored in the operating profit of short sea liner shipping. Also, the GDP growth rate of China, exchange rate, and interest rate did not significantly impact both groups. Notably, the operating profitability of Korea's liner shipping shows an exceptionally high rate during the recessions of 1998 and 2020. It is paradoxical, and not correlated with the classical economic indicators. Unlike other studies, this paper focused on the operating profit before financial expenses, considering the complexity as well as difficulty in forecasting the shipping cycle, and rendered conclusions using relatively long-term empirical analysis, including three economic shocks.

• Journal of the Korean Society of Radiology
• /
• v.17 no.3
• /
• pp.441-447
• /
• 2023

Lead(Pb), which is currently mainly used for shielding purposes in the medical radiation, has excellent radiation shielding functions, but is continuously exposed to radiation directly or indirectly due to the harmfulness of lead itself to the human body and the inconvenience caused by its heavy weight. Research on shielding materials that are human-friendly, lightweight, and convenient to use that can block risks and replace lead is continuously being conducted. In this study, based on the commonly used polyethylene terephthalate (PET) film and the fabric material used in actual radiation protective clothing, a multi-layer thin film was realized through sputtering and vacuum deposition of bismuth, tungsten, and tin, which are metal materials that can shield radiation. Thus, a shielding film was produced and its applicability as a radiation shielding material was evaluated. The radiation shielding film was manufactured by establishing the optimized conditions for each shielding material while controlling the applied voltage, roll driving speed, and gas supply amount to manufacture the shielding film. The adhesion between the parent material and the shielding metal thin film was confirmed by Cross-cut 100/100, and the stability of the thin film was confirmed through a hot water test for 1 hour to measure the change of the thin film over time. The shielding performance of the finally realized shielding film was measured by the Korea association for radiation application (KARA), and the test conditions (inverse wide beam, tube voltage 50 kV, half layer 1.828 mmAl) were set to obtain an attenuation ratio of 16.4 (initial value 0.300 mGy/s, measured value 0.018 mGy/s) and damping ratio 4.31 (initial value 0.300 mGy/s, measured value 0.069 mGy/s) were obtained. by securing process efficiency for future commercialization, light and shielding films and fabrics were used to lay the foundation for the application of films to radiation protective clothing or construction materials with shielding functions.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.9 no.1
• /
• pp.1-13
• /
• 2006

A field survey on the spatio-temporal distribution characteristics and origins of organic matter in surface sediments was carried out monthly at six stations in Gamak Bay, South Korea from April 2000 to March 2002. The range of ignition loss(IL) was $4.6{\sim}11.6%(7.1{\pm}1.6%)$, while chemical oxygen demand(CODs) ranged from $12.25{\sim}99.26mgO_2/g-dry(30.98{\pm}19.09mgO_2/g-dry)$, acid volatile sulfide(AVS) went from no detection(ND)${\sim}10.29mgS/g-dry(1.02{\pm}0.58mgS/g-dry)$, and phaeopigment was $6.84{\sim}116.18{\mu}g/g-dry(23.72{\pm}21.16{\mu}g/g-dry)$. The ranges of particulate organic carbon(POC) and particulate organic nitrogen(PON) were $5.45{\sim}23.24 mgC/g-dty(10.34{\pm}4.40C\;mgC/g-dry)$ and $0.71{\sim}2.99mgN/g-dry(1.37{\pm}0.58mgN/g-dry)$, respectively. Water content was in the range of $43.1{\sim}77.6%(55.8{\pm}5.6%)$, and mud content(silt+clay) was higher than 95% at all stations. The spatial distribution of organic matter in surface sediments was greatly divided between the northwestern, central and eastern areas, southern entrance area from the distribution characteristic of their organic matters. The concentrations of almost all items were greater at the northwestern and southern entrance area than at the other areas in Gamak Bay. In particular, sedimentary pollution was very serious at the northwestern area, because the area had an excessive supply of organic matter due to aquaculture activity and the inflow of sewage from the land. These materials stayed longer because of the topographical characteristics of such as basin and the anoxic conditions in the bottom seawater environment caused by thermocline in the summer. The tendency of temporal change was most prominently in the period of high-water temperatures than low-water ones at the northwestern and southern entrance areas. On the other hand, the central and eastern areas did not show a regular trend for changing the concentrations of each item but mainly showed a higher tendency during the low-water temperatures. This was observed for all but AVS concentrations which were higher during the period of high-water temperature at all stations. Especially, the central and eastern areas showed a large temporal increase of AVS concentration during those periods of high-water temperature where the concentration of CODs was in excess of $20mgO_2/g-dry$. The results show that the organic matters in surface sediments in Gamak Bay actually originated from autochthonous organic matters with eight or less in average C/N ratio including the organic matters generated by the use of ocean, rather than terrigenous organic matters. However, the formation of autochthonous organic matter was mainly derived from detritus than living phytoplankton, indicated the results of the POC/phaeopigment ratio. In addition, the CODs/IL ratio results demonstrate that the detritus was the product of artificial activities such as dregs feeding and fecal pellets of farm organisms caused by aquaculture activities rather than the dynamic of natural ocean activities.