• 한국전자거래학회지
• /
• 제9권1호
• /
• pp.105-122
• /
• 2004

정보기술의 발전은 비즈니스 환경을 변화시켜왔고, 이러한 변화는 공급사슬 내의 거래 당사자들 간의 비즈니스프로세스 변화에도 영향을 주었다. 이러한 변화에 대한 최근의 경향은 파트너들 간의 긴밀한 유대관계를 강조하고 있다. 하지만 이는 정보를 교환하거나 의사결정을 내리는 데에 있어 업무 담당자의 참여를 필요로 하여 의사소통의 시간적 단절을 유발하고, 실시간 내의 정보수집 및 의사결정을 불가능하게 만드는 문제를 안고 있다. 이러한 문제를 해 결하기 위해, 거래 기업간의 응용 프로그램의 자동 의사소통을 바탕으로 한 자동통합이라는 새로운 개념이 도입되고 있으며, 이러한 개념은 미래형 공급사슬 환경의 방향이 될 것이다. 본 연구에서는 자동 통합 환경과 이 환경 하에서의 공급사슬계획을 위한 비즈니스 프로세스 모델을 소개하고, 이러한 공급사슬계획의 효율적인 수립을 위하여 협상과정을 분석하여 협상 패턴을 제시하였으며, 제시된 협상 패턴을 비즈니스 시나리오에 통합시킴으로써 통합된 공급사슬계획에서 협상을 위한 비즈니스 프로세스 모델을 제시하였다.

• 전자공학회논문지C
• /
• 제34C권1호
• /
• pp.1-11
• /
• 1997

A BiCMOS circuit consists of the CMOS part which performs the logic function, and the bipolar part which drives output load. In BiCMOS circuits, transistor stuck-open faults exhibit delay faults in addition to sequential beavior. Also, stuck-on faults enhanced IDDQ (quiscent power supply current) at steady state. In this paper, a method is proposed which efficiently generates test patterns to detect stuck-open faults and stuck-on faults in BiCMOS circuits. The proposed method divides the BiCMOS circuit into pull-up part and pull-down part, and generates test patterns detect faults occured in each part by structural property of the BiCMOS circuit.

• 산업기술연구
• /
• 제30권A호
• /
• pp.9-15
• /
• 2010

Recently, Smart Grid is a emerging topic in power and communication industry. Smart Grid refers to a evolution of the electricity supply infrastructure that monitors, protects, and intelligently optimize the operation of the interconnected elements including various type of generators, power grid, building/home automation system and end-use consumers. In order to successful implementation of Smart Grid, energy management function will be the key factor that coordinates and optimally controls the various loads according to the operating condition and environments, and the load patterns in residential and commercial building will be required as fundamental element for load management. In this study, we collects many types of energy usage data of electric appliances, analyze their load curves, and make the general load patterns for electrical appliance.

• 산업기술연구
• /
• 제30권A호
• /
• pp.3-8
• /
• 2010

Recently, There have been many attempts to optimize energy usage in buildings and houses using Information Technology(IT) and the typical implementation can be found in Intelligent Building and Zero Energy Building. These kinds of buildings need to forecast the building loads, estimate the capacity requirement for power supply, and decide the capacity of the main transformer of the building. Currently, the capacity of the main transformer has been decided just using typical load estimation method not considering the load characteristics and patterns. In this paper, we propose a new load estimation method considering the load characteristics and patterns of the builiding. The proposed method was applied to actual mail center and verified the feasibility of application to actual design of buildings.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.266-268
• /
• 2003

This is based on the AGENT-LUC model framework. Luangprabang Province has the largest percentage of shifting cultivation area in Laos PDR. The model simulates the spatial and temporal patterns of the shifting cultivation in the study area, using a GIS database while the total area of shifting cultivation is controlled by supply and demand balance of food. The model simulation period is from 1990 to 1999, at a spatial resolution of 500m. The results are evaluated using statistical data and remote sensing images. Through the validation, it is concluded that the trends simulated agrees to that of statistical data and the spatial and temporal patterns are also replicated satisfactorily.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2006년도 제33회 KOSCO SYMPOSIUM 논문집
• /
• pp.137-144
• /
• 2006

Oil-fired power plants usually use several burners and the combustion air is supplied to each burner through the complicated duct which is called windbox. A windbox should be designed to supply combustion air to each burner evenly but, due to the complicated duct shape, flow distribution in the windbox is unbalanced and uneven supplies of combustion air to each burner are induced by these unbalanced flow distribution in the windbox. These flow patterns tend to make flame unstable, increase the formation of pollutants and lower the overall combustion efficiency. To prevent these disadvantages, flow patterns in the windbox should be investigated for the uniform flow distribution. In this study, computational simulation method was used to investigate the flow distribution in the windbox and measured the velocities at the exit of burners in the real windbox to compare with CFD results. The results show two significant flow patterns. One is that the flow rates of each burner are different from each other and this means that all burners operate in different conditions of air to fuel ratio. The other is that the flow distribution at the exit of each burner is not axi-symmetric although the burner shape is axi-symmetric and this increases the pollutant products like CO.

• 한국주거학회논문집
• /
• 제17권4호
• /
• pp.65-72
• /
• 2006

Most of buildings have been deteriorated with time-elapse by reflection of the building location, material, environmental circumstances and so on. The performance would go down and be demolished if anything could not be done after constructed. The maintenance should be required to preserve a decent living condition or improve a inferior condition by various plans and practices. The maintenance plan needs various data such as a repair scope, a repair time, a forecasted cost, a plan of management and so forth. Among the above required data for planning the maintenance, the deterioration characteristics of the building components would be first analyzed. The deterioration pattern would be a key role to affect and make a maintenance plan. In this paper, it aimed at classifying the deterioration patterns of building components. A deterioration pattern would be analyzed between the cumulative repair cost and time-elapse and modeled with these relations. A deterioration patterns are classified into 4 types-a accelerated type, a straight type, a temporary type and a slowly type. As a result of this research, a accelerated type includes window, window frame, general paintings, general water proofing in building components. A straight type includes the lacquer paintings, furnishings in building components and water supply pipe, boiler, sanitaries in mechanical facilities and lighting in electric facilities. Based on these research results, further study should be conducted to include any other components and an estimating model.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2005년도 제31회 KOSCO SYMPOSIUM 논문집
• /
• pp.85-92
• /
• 2005

Oil-fired power plants usually use several burners and the combustion air is supplied to each burner through the complicated duct which is called windbox. A windbox should be designed to supply combustion air to each burner evenly but, due to the complicated duct shape, flow distribution in the windbox is unbalanced and uneven supplies of combustion air to each burner are induced by these unbalanced flow distribution in the windbox. These flow patterns tend to make flame unstable, increase the formation of pollutants and lower the overall combustion efficiency. To prevent these disadvantages, flow patterns in the windbox should be investigated for the uniform flow distribution. In this study, computational simulation method was used to investigate the flow distribution in the windbox and measured the velocities at the exit of burners in the real windbox to compare with CFD results. The results show two significant flow patterns. One is that the flow rates of each burner are different from each other and this means that all burners operate in different conditions of air to fuel ratio. The other is that the flow distribution at the exit of each burner is not axi-symmetric although the burner shape is axi-symmetric and this increases the pollutant products like CO.

• 한국연소학회지
• /
• 제11권1호
• /
• pp.1-10
• /
• 2006

Oil-fired power plant usually uses several burners and combustion air is supplied to each burner through the complicated duct which is called windbox. A windbox should be designed to supply combustion air to each burner uniformly but, due to the complicated duct shape, flow distribution in the windbox is unbalanced and non-uniform supplies of combustion air are induced by these unbalanced flows in the windbox. These flow patterns tend to make flame unstable, increase the formation of pollutants and lower the overall combustion efficiency. To prevent these disadvantages, flow patterns in the windbox should be investigated for the uniform flow distribution. In this study, computational simulation method was used to investigate the flow distribution in a windbox and measured the velocities at the exit of burners in a real windbox and model tests to compare with CFD results. The results show two significant flow patterns. One is that the flow rates of each burner are different from each other and this means that all burners operate in different conditions of air to fuel ratio. The other is that the flow distribution at the exit of each burner is not axi-symmetric although the burner shape is axi-symmetric. Additionally some modifications of windbox shape and installation of baffles were proposed to make the uniform flow in the windox.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권2호
• /
• pp.157-168
• /
• 2020

Since the economic crisis sweeps across the world in 2008, the foreign direct investment of various countries has been greatly impacted. Therefore, this paper regards China as an example to analyze China's outward foreign direct investment patterns in terms of Asian financial markets with a panel data over the period 2003-2017. We mainly focus on the money market oriented outward foreign direct investment and foreign exchange market oriented outward foreign direct investment. Using the individual fixed effect model to conduct empirical analyses, the empirical findings indicate that China will reduce its foreign direct investment amount to a country with large money supply and China will increase its foreign direct investment amount to a country with large foreign exchange reserves. Furthermore, when a country has signed Free Trade Agreement with China, China will increase more foreign direct investment amount to these countries than that of a country who has not signed Free Trade Agreement with China. Moreover, the empirical findings indicate that no matter what the money market oriented outward foreign direct investment or foreign market oriented outward foreign direct investment, China will reduce its foreign direct investment amount to these Asian countries due to the global economic crisis.