• 한국전자통신학회논문지
• /
• 제12권3호
• /
• pp.465-470
• /
• 2017

본 논문은 가전로봇 항해 성능 개선을 위하여 사용된 SLAM기반 확률적 필터 개선 알고리즘을 이용하여 최근 각광받고 있는 사물인터넷과 융합한 아파트 실내나 베란다에서 사용이 가능한 스마트 가든 시스템을 설계 구현하였다. 이를 위하여 개방하드웨어 제어기인 아두이노와 센서들을 이용하였고, 세 가지 무선방식(블루투스, 이더넷, 와이파이)으로 자동 급수 및 조명, 성장모니터링을 제어 및 관찰이 가능하도록 설계하였다. 본 시스템은 이미 많은 활용이 되고 있는 기존의 식물공장과 같은 대규모 재배 시스템이 아니고 아파트와 같은 실내에서 사용 할 수 있도록 하기 위하여 개발되었다. 개발된 시스템은 스마트폰 앱을 통한 제어는 물론 토양센서, 조도센서, 습도센서, 온도센서 등을 이용하여 환경데이터를 수집하고 수집된 데이터를 분석하여 급수펌프와 LED 램프, 온도를 제어하기 위한 환기팬 등의 기능으로 구성되었다. 무선 원격제어 방법으로는 블루투스, 이더넷, 와이파이 등이 모두 가능하도록 구현 하였다. 따라서 사용자가 집안에 없을 때 원격 제어 및 모니터링이 가능하도록 설계하였다.

• 한국유체기계학회 논문집
• /
• 제10권2호
• /
• pp.41-45
• /
• 2007

The shutoff unit was designed to provide rapid insertion of neutron absorbing material into the reactor core to shutdown the reactor quickly and also to withdraw the absorber slowly to avoid a log-rate trip. Four shutoff units were installed on the HANARO reactor but the half-core test facility was equipped with one shutoff unit. The reactor trip or shutdown is accomplished by four shutoff units by insertion of the shutoff rods. The shutoff rod(SOR) is actuated by a directly linked hydraulic cylinder on the reactor chimney, which is pressurized by a hydraulic pump. The rod is released to drop by gravity, when triplicate solenoid valves are de-energized to vent the cylinder. The hydraulic pump, pipe and air supply system are provided to be similar with the HANARO reactor. The shutoff rod drops for 647mm stroke within 1.13 seconds to shut down the reactor and it is slowly inserted to the full down position, 700mm, with a damping. We have conducted the drop test of the shutoff rod in order to show the performance and the structural integrity of operating system of the shutoff unit. The present paper deals with the 647mm drop time and the withdrawal time according to variation of the pool water temperature, the water level and the core flow.

• 전기화학회지
• /
• 제5권1호
• /
• pp.27-29
• /
• 2002

본 연구는 메탄올과 공기를 이용하여 상온, 상압에서 전기를 발생시키는 휴대폰용 전원공급 장치의 개발에 관한 것이다. 이 장치는 직접 메탄을 연료전지(DMFC)와 Back-up전지가 병렬로 연결되어 있어, 통화시 소요 전력의 최대 $50\%$ DMFC가 공급하고 나머지 부분은 Back-up 전지가 공급한다. 또한 통화 대기시에는 DMFC가 $100\%$ 필요 전력을 공급하고, 잉여 전력으로 Back-up전지를 충전한다. 상기 DMFC는 유효면적이 $9cm^2$인 8개의 단위전지가 직렬로 연결되어 있으며, 휴대폰의 작동 전압 범위인 2.5-3.9V의 전압을 출력한다.

• 한국화재소방학회논문지
• /
• 제26권5호
• /
• pp.35-40
• /
• 2012

본 연구에서는 WSR에서 혼합기의 CO첨가 효과에 따른 매연의 생성특성을 규명하기 위하여 수치해석 연구를 수행하였다. 연료는 에틸렌을 사용하였으며, 산화제는 순수 공기를 이용하였다. 서로 다른 당량비 조건(${\phi}$=2.0, 2.5, 3.0)에서 CO의 농도를 변화시켜가며 매연 생성 특성을 조사하였다. 10 %의 CO 첨가 경우에는 가장 작은 양의 CO를 유입하는데도 불구하고, 배출되는 CO의 몰분율이 다른 당량비 경우에 비해서 최대값을 나타낸다. 이는 초기 매연이 생성되는 지점에서는 매우 적은량의 CO가 매연이나 다른 탄소화합물로 변화함을 의미한다. 매연부피분율은 CO의 첨가량이 증가함에 따라 감소되는데 매연생성에서 중요 화학종인 pyrene과 아세틸렌의 생성이 CO의 첨가에 의해 저하되기 때문이다. 또한 당량비가 2.5인 경우에 가장 많은 매연이 생성됨을 확인 할 수 있는데, 이는 연료과잉조건과 연소온도의 적절한 기여로서 설명되어 질 수 있다. 또한, 표면성장율과 중요 화학종의 농도는 매연생성에 대한 HACA(hydrogen abstraction and carbon addition)기구를 정당화한다.

• 한국태양에너지학회 논문집
• /
• 제34권2호
• /
• pp.53-59
• /
• 2014

Ice Rink is energy intensive building type. Concern of energy saving from buildings is one of very important issues nowadays. New and renewable energy sources for buildings are especially important when we concern about energy supply for buildings. Among new and renewable energy sources, use of seawater for heating and cooling is an emerging issue for energy conscious building design. The options of energy use from sea water heat sources are using deep sea water for direct cooling with heat exchange facilities, and using surface layer water with heat pump systems. In this study, energy consumptions for an Ice Rink building are analyzed according to the heat sources of air-conditioning systems; existing system and sea water heat source system, in a coastal city, Kangnung. The location of the city Kangnung is good for using both deep sea water which is constant temperature throughout the year less than $2^{\circ}C$, and surface layer water which should be accompanied with heat pump systems. The result shows that using sea water from 200m and 30m under sea lever can save annual energy consumption about 33% of original system and about 10% of that using seawater from 0m depth. Annual energy consumption is similar between the systems with seawater from 200m and 30m. Although the amount of energy saving in summer of the system with 200m depth is higher than that with 30m depth, the requirement of energy in winter of the system with 200m depth is bigger than that with 30m depth.

• 한국초전도ㆍ저온공학회논문지
• /
• 제18권1호
• /
• pp.41-45
• /
• 2016

The technology of supplying the electric power by wireless power transfer (WPT) is expected for the next generation power feeding system since it can supply the power to portable devices without any connectors through large air gap. As such a technology based on strongly coupled electromagnetic resonators is possible to deliver the large power and recharge them seamlessly; it has been considered as a noble option to wireless power charging system in the various power applications. Recently, various HTS wires have now been manufactured for demonstrations of transmission cables, motors, MAGLEV, and other electrical power components. However, since the HTS magnets have a lower index n value intrinsically, they are required to be charged from external power system through leads or internal power system. The portable area is limited as well as the cryogen system is bulkier. Thus, we proposed a novel design of wireless power charging system for superconducting HTS magnet (WPC4SM) based on resonance coupling method. As the novel system makes possible a wireless power charging using copper resonance coupled coils, it enables to portable charging conveniently in the superconducting applications. This paper presented the conceptual design and operating characteristics of WPC4SM using different shapes' copper resonance coil. The proposed system consists of four components; RF generator of 370 kHz, copper resonance coupling coils, impedance matching (IM) subsystem and HTS magnet including rectifier system.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 동계학술발표대회 논문집
• /
• pp.611-617
• /
• 2008

Nowadays Plate Heat Exchanger (PHE) is widely used in different industries such as chemical, food and pharmaceutical process and refrigeration due to the efficient heat transfer performance, extreme compact design and efficient use of the construction material. In present study, discussed main conception of plate heat exchanger and applied in vacuum. PHE and aimed apply in the fresh water generator which installed in ship to desalinate seawater to fresh water use heat from engines. The experiment is proceeded to investigate the heat transfer between cold and hot fluid stream at different flow rate and supply temperature of hot fluid. Generated fresh water as outcome of the system. PHE is an important part of a condensing or evaporating system. One of common assumptions in basic heat exchanger design theory is that fluid is to be distributed uniformly at the inlet of each fluid side and throughout the core. However, in practice, flow mal-distribution is more common and can significantly reduce the heat exchanger performance. The flow and heat transfer are simulated by the k-$\varepsilon$ standard turbulence model. Moreover, the simulation contacted flow maldistribution in a PHE with 6 channels.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2007년도 동계학술발표대회 논문집
• /
• pp.459-465
• /
• 2007

This study was conducted to calculate the LCC of a apartment complex with a type of heating system, district heating and cogeneration system. For the purpose of analyzing LCC according to size of apartment complex, 500, 1,500 and 4,000 houses of model apartment selected. This research performs design of heating system and the life cycle cost analysis including an initial cost, energy cost, maintenance and operation cost, replacement cost and renovation cost during the project period(15years). According to the calculated results, 1) Initial cost of cogeneration system with 500, 1500 and 4000 houses is higher than district heating system each of 20%, 13%, 12%. 2) In case of cogeneration system, the payback period by electric generation is 5.21, 4.92 and 4.47 years and saving cost was calculated 29 billion won, 94 billion won and 262 billion won after payback period. 3) Cogeneration system LCC was 1.12, 1.07 and 1.06 times larger than district system with the size of apartment complex. According to the case of this study district heating system is more efficient than cogeneration system in terms of the reduction of LCC. 4) Gas Engine Co-generation System is more efficient than other systems because it can collect progressive part from electric charge progressive stage system. However, the efficiency is decreasing because of raising of fuel bills(LNG) and lowering of power rate for house use. Especially the engine is foreign-made so the cost of maintenance and repair is high and the technical expert is short. 5) District heating is also affected by fuel bills so we should improve energy efficiency through recovering of waste heat(incineration heat, etc.). Also, we should supply district cooling on the pattern of heat using of let the temperature high in winter and low in summer.

• 한국항공우주학회지
• /
• 제37권8호
• /
• pp.737-743
• /
• 2009

본 연구는 Tabu Search를 이용하여 LHP의 최적설계를 진행하는 방법과 절차 및 결과를 제시하고자 한다. 최적설계의 목적은 항공기에 탑재된 리튬이온 전지의 작동온도 조건을 만족하면서 LHP의 중량을 최소화시키는 것이다. 전지는 고에너지 밀도의 특성으로 항공기에 장착된 고에너지 레이저의 동력원으로 사용되는 것으로 가정되었다. 해석은 Steady state analysis model에 기초하였으며 메타모델로 근사화하였다. 최적화 결과로 Tabu Search는 유전알고리듬 등 다른 비 구배기반 최적화 방법에 비해 비교적 적은 계산 시간을 소요하면서도 전역해를 보장하였으나 난수에 의해 초기해를 바꾸어 가면서 최적화를 여러 번 시도해야 하는 단점이 있었다. 그리고 최적화 과정을 통해 기 발표된 LHP와 동일한 성능을 가지면서도 경량화된 LHP를 얻을 수 있었다.

• 한국식생활문화학회지
• /
• 제31권6호
• /
• pp.634-642
• /
• 2016

Chinese cabbage is produced and consumed as a main material for kimchi and as a staple vegetable in Korea throughout the year. However, due to environmental changes unbalance between supply and demand is repeated annually, requiring development of long-term storage technologies. Chinese cabbages, were harvested, put in plastic boxes, and precooled at $2^{\circ}C$ for 24 hours using forced air precooler. After precooling, Chinese cabbages were MAP-treated with 0.02 mm HDPE film and functional film and stored at low temperature ($1{\pm}0.5^{\circ}C$). The weight-loss rates after 9-weeks of storage were 8.47% in the control group, 4.07% in the HDPE film-treated group, and 3.07% in the functional film-treated group, respectively, suppressing weight loss. Trimming loss rate after 6-weeks of storage was 6.86% in the functional film MAP-treated group and lower than 7.50% in the control group. In the sensory test with 7 points as the limit of commodity, the control group lost it after 6-weeks of storage while the MAP-treated groups retained over 7 points. The functional film MAP-treated group showed over 6 points for processing as kimchi until 9-weeks of storage, proving that Pallet-type MAP storage is effective for extending storage life of spring Chinese cabbage.