• Journal of the East Asian Society of Dietary Life
• /
• v.22 no.4
• /
• pp.497-505
• /
• 2012

The nutritional, physicochemical and sensory quality characteristics of chilled loins of Jeju Black Cattle, Hanwoo and imported Australian beef were compared. For nutritional properties, moisture and crude protein contents of Jeju Black Cattle beef were 65.91% and 17.39% respectively, the lowest among the comparison groups. On the other hand, their crude fat and crude ash contents were 15.89% and 0.79%, respectively, the highest among the comparison groups. There was a significant difference in crude ash content, but there was no significant difference in the other properties. The Fe and Zn contents of Jeju Black Cattle beef were 29.85 and 48.13 ppm, respectively, lower than those of Hanwoo beef, although the difference was not significant. These values were higher than those of Australian beef (p<0.05). There was no significant difference among the samples in contents of Ca, P, Na and Cu. The total amino acid and essential amino acid contents of Jeju Black Cattle beef were 16.81% and 9.08%, respectively, the lowest among the samples, although the difference was not significant. The ratio of essential amino acids to total amino acids of Jeju Black Cattle beef was 54.01%, the highest among the samples. The saturated fatty acid (43.25%), stearic acid (13.51%), linoleic acid (2.39%) and essential fatty acid (2.47%) contents of Jeju Black Cattle beef were the lowest. However, their unsaturated fatty acid (56.69%), oleic acid (47.80%) and MUFA/SFA ratios were the highest, and there were significant differences compared with Australian beef. There was no significant difference in the PUFA/SFA ratio. Among physicochemical properties, redness ($a^*$) of Jeju Black Cattle beef was the highest while melting point was the lowest (p<0.05). There were no significant differences in lightness ($L^*$), yellowness ($b^*$), pH, water holding capacity, cooking loss or shear force value. For sensory properties, raw meat aroma, cooked meat aroma and palatability of Jeju Black Cattle beef were superior compared to other comparison groups, with significant differences in comparison with Australian beef (p<0.05). However, there were no significant differences in taste, juiciness, or tenderness of cooked meat.

• Journal of the East Asian Society of Dietary Life
• /
• v.18 no.6
• /
• pp.997-1006
• /
• 2008

Four different spices (herbs) including rosemary, oregano, basil & sage and green tea were added individually to the ground pork or ground chicken with different percentages of 0.5, 1.0, and 1.5, respectively. The consumer sensory qualities of the five natural herbs and their antioxidant effects were evaluated using pork- and chicken-Yukwonjeon. In our consumer sensory evaluation, the 0.5% herb addition and control groups had generally better acceptability than the higher addition groups. In particular, pork-Yukwonjeon with the addition of 0.5% of green tea or oregano and chicken-Yukwonjeon with the addition of 0.5% of green tea or rosemary 0.5% were generally preferred more profoundly on the acceptance and ranking tests. However, sensory differences, especially in texture, among the different samples were reduced after storage. With regard to the results of lipid oxidation without storage, the TBARS values of the herb addition groups were slightly lower than those of the control group, but not significantly so (p>0.05). The antioxidant effects of each herb achieved higher values at longer storage times and with higher levels of added herbs. The antioxidant effects differed with different kinds of meat. The addition of the herb samples resulted in TBARS value reductions of $15.0{\sim}45.8%$ and $9.5{\sim}31.0%$, respectively, in the pork and chicken-Yukwonjeon stored at $6^{\circ}C$. Furthermore, the antioxidant effects of herbs during storage at $-20^{\circ}C$ were observed as reducing in the TBARS values of $8.4{\sim}31.7%$ and $19.0{\sim}33.0%$ in the pork-and chicken-Yukwonjeon, respectively. Green tea evidenced the highest levels of antioxidant activity on lipid oxidation, as it was acceptable even at higher concentrations according to our sensory evaluations. These results illustrate the possibility of producing superior Yukwongen with green tea and herbs, according to the different kinds of meat used.

• Journal of the Korean Chemical Society
• /
• v.60 no.3
• /
• pp.203-214
• /
• 2016

The purpose of this study was to investigate brain activation pattern and functional connectivity during convergence thinking based creative problem solving and chemistry problem solving to identify characteristic convergence thinking that is backbone of creative problem solving using functional magnetic resonance imaging(fMRI). A fMRI paradaigm inducing convergence thinking and chemistry problem solving was developed and adjusted on 17 highschool students, and brain activation image during task was analyzed. According to the results, superior frontal gyrus, middle frontal gyrus, inferior frontal gyrus, medial frontal gyrus, cingulate gyrus, precuneus and caudate nucleus body in left hemisphere and cuneus and caudate nucleus body in right hemisphere were significantly activated during convergence thinking. The other hand, middle frontal gyrus, medial frontal gyrus and caudate nucleus in left hemisphere and middle frontal gyrus, lingual gyrus, caudate nucleus, thalamus and culmen of cerebellum in right hemisphere were significantly activated during chemistry problem solving. As results of analysis functional connectivity, all of areas activated during convergence thinking were functionaly connected, whereas scanty connectivity of chemistry problem solving between right middle frontal gyrus, bilateral nucleus caudate tail and culmen. The results show that logical thinking, working memory, planning, imaging, languge based thinking and learning motivation were induced during convergence thinking and these functions and regions were synchronized intimately. Whereas, logical thinking and inducing learning motivation functioning during chemistry problem solving were not synchronized. These results provide concrete information about convergence thinking.

• Nuclear Engineering and Technology
• /
• v.39 no.5
• /
• pp.603-616
• /
• 2007

Roy Huddle, having invented the coated particle in Harwell 1957, stated in the early 1970s that we know now everything about particles and coatings and should be going over to deal with other problems. This was on the occasion of the Dragon fuel performance information meeting London 1973: How wrong a genius be! It took until 1978 that really good particles were made in Germany, then during the Japanese HTTR production in the 1990s and finally the Chinese 2000-2001 campaign for HTR-10. Here, we present a review of history and present status. Today, good fuel is measured by different standards from the seventies: where $9*10^{-4}$ initial free heavy metal fraction was typical for early AVR carbide fuel and $3*10^{-4}$ initial free heavy metal fraction was acceptable for oxide fuel in THTR, we insist on values more than an order of magnitude below this value today. Half a percent of particle failure at the end-of-irradiation, another ancient standard, is not even acceptable today, even for the most severe accidents. While legislation and licensing has not changed, one of the reasons we insist on these improvements is the preference for passive systems rather than active controls of earlier times. After renewed HTGR interest, we are reporting about the start of new or reactivated coated particle work in several parts of the world, considering the aspects of designs/ traditional and new materials, manufacturing technologies/ quality control quality assurance, irradiation and accident performance, modeling and performance predictions, and fuel cycle aspects and spent fuel treatment. In very general terms, the coated particle should be strong, reliable, retentive, and affordable. These properties have to be quantified and will be eventually optimized for a specific application system. Results obtained so far indicate that the same particle can be used for steam cycle applications with $700-750^{\circ}C$ helium coolant gas exit, for gas turbine applications at $850-900^{\circ}C$ and for process heat/hydrogen generation applications with $950^{\circ}C$ outlet temperatures. There is a clear set of standards for modem high quality fuel in terms of low levels of heavy metal contamination, manufacture-induced particle defects during fuel body and fuel element making, irradiation/accident induced particle failures and limits on fission product release from intact particles. While gas-cooled reactor design is still open-ended with blocks for the prismatic and spherical fuel elements for the pebble-bed design, there is near worldwide agreement on high quality fuel: a $500{\mu}m$ diameter $UO_2$ kernel of 10% enrichment is surrounded by a $100{\mu}m$ thick sacrificial buffer layer to be followed by a dense inner pyrocarbon layer, a high quality silicon carbide layer of $35{\mu}m$ thickness and theoretical density and another outer pyrocarbon layer. Good performance has been demonstrated both under operational and under accident conditions, i.e. to 10% FIMA and maximum $1600^{\circ}C$ afterwards. And it is the wide-ranging demonstration experience that makes this particle superior. Recommendations are made for further work: 1. Generation of data for presently manufactured materials, e.g. SiC strength and strength distribution, PyC creep and shrinkage and many more material data sets. 2. Renewed start of irradiation and accident testing of modem coated particle fuel. 3. Analysis of existing and newly created data with a view to demonstrate satisfactory performance at burnups beyond 10% FIMA and complete fission product retention even in accidents that go beyond $1600^{\circ}C$ for a short period of time. This work should proceed at both national and international level.

• Food Science and Preservation
• /
• v.15 no.4
• /
• pp.512-517
• /
• 2008

Fermentation characteristics of chestnut-added yakju prepared using various proportions of raw materials such as rice koji, rice flour, cornflour koji and cornflour were investigated. The pH of chestnut-added yakju prepared with cornflour koji and saccharified cornflour showed a higher value than that of chestnut-yakju prepared with rice koji and saccharified rice flour. The total acid content of chestnut-added yakju prepared with rice koji and saccharified rice flour was higher than that of chestnut-added yakju prepared using cornflour koji and sacharified cornflour. The reducing of sugar in chestnut-added yakju prepared with saccharified rice flour or saccharified cornflour was rapid at the first brewing stage, decreased dramatically after 2 days, and then decreased slowly after 5 days of fermentation. The value of L and a, the Hunter values, were high in chestnut-added yakju prepared with cornflour koji, and value b was high in chestnut-added yakju with rice koji. The content of iso-amyl alcohol was the highest of seven kinds of fusel oil found in chestnut-added yakju. Ethanol content increased to $17.6{\sim}18.2%$(v/v) after 8 days of fermentation. The content of lactic acid was the highest of all organic acids in the chestnut-added yakju. Sensory test results on chestnut-added yakju prepared with saccharifed corn flour showed that if rice flour is used as a sugar supplement for chestnut, the yakju prepared using koji had better flavor and taste. If cornflour was used in the preparation of chestnut-added yakju, the used of saccharified cornflour offered superior flavor and taste.

• Food Science and Preservation
• /
• v.19 no.2
• /
• pp.301-307
• /
• 2012

The quality of brown rice vinegar that was produced via static culture (A) was compared with the quality of three types of domestic commercial brown rice vinegar (B, C, and D) and of three types of Japanese brown rice vinegar (E, F, and G). The results showed titratable acidity levels of 6.39%, 4.52-6.32%, and 4.51-4.89% in the static-cultured brown rice vinegar, the domestic commercial brown rice vinegars, and the Japanese brown rice vinegars, respectively. The pH levels were 3.28, 2.58-2.97, and 3.03-3.27 in the static-culture brown rice vinegar, the domestic commercial brown rice vinegars, and the Japanese brown rice vinegars, respectively, which show similar values of the static-culture brown rice vinegar and the Japanese brown rice vinegars. The total nitrogen (TN) values of the static-culture brown rice vinegar, the domestic commercial brown rice vinegars, and the Japanese brown rice vinegars were 0.24, 0.03-0.16, and 0.12-0.17, respectively, with the highest value for the static-culture brown rice vinegar, substantial differences among the domestic commercial brown rice vinegars, and similar contents among the Japanese brown rice vinegars. For free sugar, glucose was either detected only in a small quantity or not detected at all in the static-culture brown rice vinegar and the Japanese brown rice vinegars, which showed perfect fermentation. The glucose and maltose contents were higher in the domestic commercial brown rice vinegars. The organic acid content of the static-culture brown rice vinegar was similar to that of the Japanese brown rice vinegars. Therefore, the total acidity content, TN value, sensory property, and quality of the static-culture brown rice vinegar (A) were superior to those of the domestic and Japanese brown rice vinegars.

• Food Science and Preservation
• /
• v.20 no.3
• /
• pp.323-329
• /
• 2013

Strawberries are among the leading ready-to-eat agricultural products that have superior taste and nutrition. Thus, consumer concerns about the safety of eating strawberries are growing. To evaluate the contamination levels of strawberries according to their cultivation methods (nutriculture, pesticide-free culture and organic farming) and parts [fruit (flesh), stalk (pedunle) and leaf (calyx)], 1,020 parts of strawberry samples were collected at 12 farms in Nonsan-si and quantitatively or qualitatively examined for the indicators of food safety and food poisoning bacteria. The total aerobic bacteria count in the whole samples was 2.3~6.8 ${\log}_{10}$ CFU/g, and coliform bacteria were detected in 14.2% of the whole samples with a contamination level range of 2.1~4.5 log CFU/g. E. coli were detected in 0.9% of the whole samples with a contamination level range of 2.1~2.8 log CFU/g. The analysis of the bacterial levels according to the cultivation methods showed that the total aerobic bacteria and coliform counts were higher in the strawberries that were grown via organic farming than in those that were grown via nutriculture and pesticide-free culture. However, the E. coli counts of the strawberries that were grown via organic farming and via pesticide-free culture were similar and differed from that of the strawberries that were grown via nutriculture. The analysis of the contamination levels according to the parts of the strawberries showed that the total aerobic bacteria, coliform and E. coli counts of the fruits, stalks and leaves of the strawberries did not significantly differ. Staphylococcus aureus was detected in two organically grown strawberries, but Salmonella spp., Listeria monocytogenes and E. coli O157:H7 were not detected in the whole samples. These results show that the bacterial contamination levels of the strawberries differed based on their cultivation methods. Thus, a suitable method of reducing the bacterial contamination levels of strawberries according to their farming methods is needed.

• Korean Journal of Plant Resources
• /
• v.24 no.2
• /
• pp.253-259
• /
• 2011

In this studies, contents and activities of antioxidative substances in the fruits of a pear cultivar and five Korean wild pear lines were investigated. The content of total phenolic compounds was highest with Pyrus pyrifolia var. culta "Shingo" (7.68 $mg{\cdot}g^{-1}$, D.W.) while total flavonoids was highest with P. ussuriensis var. acidula (5.66 $mg{\cdot}g^{-1}$, D.W.). The contents of total polyphenols and flavonoids varied according to plant species, but in general pyrifolia lines had higher total polyphenols than total flavonoids whereas in ussuriensis lines total flavonoid contents were higher than total polyphenols. The scavenging effects of DDPH radicals was highest with highest with P. ussuriensis var. seoulensis ($RC_{50}$=1.45 $mg{\cdot}mL^{-1}$) and that of ABTS radicals was highest with P. ussuriensis var. acidula ($RC_{50}$=0.69 $mg{\cdot}mL^{-1}$). A pear cultivar "Shingo" showed highest total polyphenol content, but scavenging activity of DDPH and ABTS radicals was lowest. The fruits of P. ussuriensis var. seoulensis contained low level of phenolic compounds, but their scavenging effects on two radicals was superior. Ferrous ion chelating effect was high in P. pyrifolia var. culta (98.93%), and in P. ussuriensis var. sinensis (68.71%), but two species had low scavenging activity. The content of phenolic compounds in wild pears was not always directly proportional to the radical scavenging activity. Neither radical scavenging activity was to ferrous ion chelating activity. In conclusion the fruits of P. ussuriensis var. acidula, P. ussuriensis var. seoulensis, and P. ussuriensis var. sinensis had great potential for the development of new antioxidative functional food because their antioxidative activity is higher or at least similar to P. pyrifolia var. culta. However, due to their different levels of antioxidative effects, the development of methods of using them jointly, not singly, to obtain maximum level of antioxidants is recommended.

• Korean Journal of Materials Research
• /
• v.11 no.5
• /
• pp.427-430
• /
• 2001

We prepared 10cm-diameter Si(100)/500 $\AA$-Si$_3$N$_4$/Si(100) wafer Pairs adopting 500 $\AA$ -thick Si$_3$N$_4$layer as insulating layer between single crystal Si wafers. Si3N, is superior to conventional SiO$_2$ in insulating. We premated a p-type(100) Si wafer and 500 $\AA$ -thick LPCVD Si$_3$N$_4$∥Si (100) wafer in a class 100 clean room. The cremated wafers are separated in two groups. One group is treated to have hydrophobic surface and the other to have hydrophilic. We employed a FLA(fast linear annealing) bonder to enhance the bond strength of cremated wafers at the scan velocity of 0.1mm/sec with varying the heat input at the range of 400~1125W. We measured bonded area using a infrared camera and bonding strength by the razor blade crack opening method. We used high resolution transmission electron microscopy(HRTEM) to probe cross sectional view of bonded wafers. The bonded area of two groups was about 75%. The bonding strength of samples which have hydrophobic surface increased with heat input up to 1577mJ/$m^2$ However, bonding strength of samples which have hydrophilic surface was above 2000mJ/$m^2$regardless of heat input. The HRTEM results showed that the hydrophilic samples have about 25 $\AA$ -thick SiO layer between Si and Si$_3$N$_4$/Si and that maybe lead to increase of bonding strength.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.4
• /
• pp.104-123
• /
• 2019

Various European countries were active rather early on in the formation and research of Korean ceramics, which are considered a representative genre of Korean art. Of these, England is especially noteworthy due to its relatively large volume of extant archival material related to the procurement of Korean ceramics in modern Britain. The material is important in that it contributes to our understanding of the formation and economic worth of these collections. Especially meaningful are the previously unknown documents dating to the period when institutions such as the British Museum and the Victoria & Albert Museum were most actively collecting Korean ceramics. These documents provide insight into the circumstances-process, prices, standards, perceptions, etc.-of procurement for the Korean ceramics now in British collections. The changes in the perception of Korean ceramics and the intention for forming such collections in modern Britain can be divided into three periods. The first, starting from the late 1870s and ending in the late 1880s, is categorized by the collectors' misguided ideal of Korean ceramics in the absence of a true understanding of the subject. During the late 1880s up until 1910, the Korean ceramics entering British collections were mostly ethnographic in nature and examples of implements used in Koreans' daily lives. Lastly, from 1910 to 1940, Korean ceramics were regarded as art objects to be collected, and Goryeo celadons formed the core of many of the British collections being assembled at the time. As for the matter of collecting standards and processes, the matter is examined through the study of three individuals who visited Korea and acquired Korean ceramics in the early 20th century. After 1910, the British started to make trips to the Far East via boat or the Trans-Siberian Express and purchase Korean ceramics during their travels. It has been confirmed that former bureaucrats were able to acquire 'good and old Goryeo ceramics' at reasonable prices from either tomb robbers or through direct visits to regions where such wares were being excavated. In addition, this study also focuses on the previously unfamiliar company Kavanaugh & Co, which made important sales and provided transport of various objects, including Korean ceramics, to its Western clients. The final part of this study examines the standards of appraisal for the Korean ceramics collected in modern Britain. The main criterion the balance between form and price of the piece. In other words, the best pieces were those that were of superior quality but acquired at the cheapest prices. British collectors particularly valued not only the Goryeo celadons favored by the Japanese but also Joseon ceramics for their innovative form, design, and technique. These standards of aesthetic and form were important factors that influenced the formation of diverse Korean ceramic collections in modern Britain.