• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.206-209
• /
• 2008

The modified supercritical water treatment method is adopted for hydrolysis of wood powder, Populus alba$\times$glandulosa. This modified method is containing 0.05% HCl or $HNO_3$ as acid catalyst. The supercritical water treatment(SCW) was performed for 1 min. with $350^{\circ}C$, $380^{\circ}C$, $400^{\circ}C$ and $425^{\circ}C$, respectively, under 230 $\pm$ 10 atm using continuous flow system. When acid was added to powder prepared for SCW treatment, the yields of monomeric sugars were significantly increased. The lignin remained after supercritical treatment was applied to gel permeation chromatography(GPC) for molecular weight distribution analysis. Compared to the lignin produced from SCW treatment without acid catalyst, the average molecular weight of lignin compounds treated with acid was clearly decreased. Particularly, Mn/Mw ratio is decreased. This result shows supercritical water treatment of wood powder can change the molecular weight of lignin to small size. However, it is necessary to be further studied for exactly characterizing the lignin produced from supercritical water treatment.

• 신재생에너지
• /
• 제3권1호
• /
• pp.38-45
• /
• 2007

To characterize thermo-chemical feature of sugar conversion of woody biomass, poplar wood ($Populus\;alba{\times}glandulosa$) powder was treated with supercritical water system. Supercritical water treatment (SCWT) was performed for 60 seconds at different temperatures (subcritical zone 350; supercritical zone $300,\;400,\;425^{\circ}C$) under two pressures $230{\pm}10atm$ as well as $330{\pm}10atm$, respectively, using flow type system. After separation of solid residues from SCWT products, the monomeric sugars in aqueous part converted from poplar wood powder were quantitatively determined by high performance anionic exchange chromatography [HPAEC] equipped with PAD detector and Carbo Pac PA10 column. As the temperature treated increased, the degradation of poplar wood powder was enhanced and ca 83% of woody biomass was dissolved into the water at $425^{\circ}C$. However, the pressure didn't help the degradation of biomass components. At subcritical temperature range, xylose was first formed by degradation of xylan, which is main hemicellulose component in hardwood species, while cellulose degradation started at the transition zone between sub and supercritical conditions and was remarkably accelerated at the supercritical temperature. In the supercritical water system the maximum yield of monomeric sugars amounts to ca. 7.3% based on oven dried wood weight at $425^{\circ}C$.

• 대한화학회지
• /
• 제58권1호
• /
• pp.76-79
• /
• 2014

Petroleum refinery effluents are waste originating from industries primarily engaged in refining crude oil. It is a very complex compound of various oily wastes, water, heavy metals and so on. Conventional processes are unable to effectively remove the chemical oxygen demand (COD) of petroleum refinery effluents. Supercritical water oxidation (SCWO) was proposed to treat petroleum refinery effluents. In this paper, methanol was used to investigate co-oxidative effect of methanol on petroleum refinery effluents treatment. The results indicated that supercritical water oxidation is an effective process for petroleum refinery effluents treatment. Adding methanol caused an increase in COD removal. When reaction temperature is $440^{\circ}C$, residence time is 20 min, OE is 0.5 and initial COD is 40000 mg/L, and COD removal increases 8.5%.

• Journal of the Korean Wood Science and Technology
• /
• 제34권6호
• /
• pp.44-50
• /
• 2006

아임계 및 초임계수 특성에 따른 목질 바이오매스의 당화특성을 분석하기 위하여 물의 초임계 압력인 23 MPa로 고정하고 아임계 온도($325^{\circ}C$, $350^{\circ}C$)와 초임계 온도($380^{\circ}C$, $400^{\circ}C$, $425^{\circ}C$)에서 현사시나무 목분을 각각 60초 동안 처리하였다. 생성된 현사시 목분의 분해산물에는 액상과 고형분의 분해산물이 섞여 있었다. 각 처리조건에 따른 목분의 분해율은 처리 온도가 상승함에 따라 증가하였으며 초임계 온도인 $425^{\circ}C$에서 최고 83.1%의 분해율을 나타냈다. 아임계 및 초임계수 분해에 의해서 생성된 단당류는 액상의 분해산물을 대상으로 고성능 음이온 교환 크로마토그래프(HPAEC)를 이용하여 분석하였다. 목질바이오매스의 초임계수 분해과정에서 처리온도가 높아지면서 단당류 수율은 증가하는 경향을 보였으며, $425^{\circ}C$에서 가장 높은 7.3%의 단당류 수율을 나타내었다. 아임계 온도 범위에서는 현사시나무의 섬유소 성분 중에서 자일란이 우선적으로 분해되어 자일로스의 생성비율이 비교적 높았으며, 처리온도가 높아지면서 셀룰로오스의 분해에 의한 글루코오스 생성율이 급격히 상승하였다.

• 한국염색가공학회지
• /
• 제31권1호
• /
• pp.48-64
• /
• 2019

With evolution in the production environment of the textile industry, the need for non-water-based dyeing technologies and eco-friendly process facilities in the dyeing and processing stages has increased. In recent years, supercritical fluid dyes have been developed and commercialized in Europe, centering on this demand. However, so far, such dyes have been mainly applied in the processing of PET fibers. Basic research has mainly involved investigation of dyeing by supercritical carbon dioxide or solubility of such dyes, and more in-depth research should be continuously carried out. In this review, we describe the types and characteristics of supercritical fluids that exhibit specific properties at pressures and temperatures over the critical point. In addition, the state of the art in the dyeing and processing technology using supercritical fluids and associated, processing problems, environmental regulation, and wastewater treatment issues are described in detail. We hope this review can contribute to the supercritical fluid technology being further developed as an environment friendly dyeing processing method. Furthermore, we expect that the technique can be used as a means of ensuring different, high-quality dyed products.

• 한국세라믹학회지
• /
• 제33권12호
• /
• pp.1319-1324
• /
• 1996

Silica aerogels were synthesis by the sol-gel-supercritical drying process using isopropanol as a solvent. Effets of the heat-treatment and the surface modification through propoxylation on the structural reinforcement as well as the surface hydrophobic/hydrophilic characteristics of aerogels were investigated. Silica aerogels synthesized by supercritical drying were hydrophobic but aerogels heat-treated above 20$0^{\circ}C$ were transformed to be hydrophilic. In particular it was found that the skeletal structure of aerogels heat-treated at 50$0^{\circ}C$ was strong enough not to crack after adsorbing a large amount of water vapor. Hydrophilic aerogels modified by propoxylation at 28$0^{\circ}C$ for 20 h were reversed to the hydrophobic form. Transition between hydrophobicity and hydrophilicity was reversible. The hydrophobicvity and the hydrophilicity of silica aerogels were attributed to the Si-Oh bond and the nonpolar C-H bond groups of orgainc species respectively.

• 플랜트 저널
• /
• 제4권2호
• /
• pp.60-65
• /
• 2008

As the operating conditions in a supercritical oxidation reactor are set in high temperature with high pressure causing a reactor suffering from the harsh circumstances. It means the reactor adopts itself with Fe-Cr alloy in acidic atmosphere with low pH value and Ni alloy in basic atmosphere with high pH value due to its superior corrosion resistance. The study, whose target waster water is pertinent to the latter part, has selected Ni alloy such as ostenite type stainless steel 304 and 316, superstainless steel AL6XN, Inconel 625, MAT 21, and titanium Gr. 5 in order to measure corrosion resistance against those samples under the same conditions of temperature and pressure applied for a supercritical oxidation reactor. The result shows the identifiable difference in corrosion resistance by observing the surface states through a scanning probe microscope as well as measuring the weight loss through making the samples above deposited in wastewater for two-week and four-week stay. The purpose of this corrosion experiment is to identify the most corrosion-resistant material among sample species pre-selected according to pH concentration of wastewater in pursue of applying for a reactor exposed to the extreme corrosion environment. It is because such a reactor made of a verified material enables to safeguard a stable operation under the supercritical wastewater processing facility.

• 플랜트 저널
• /
• 제6권3호
• /
• pp.53-61
• /
• 2010

This paper presents failure analysis on weld-joint of the waterwall tubes in USC boilers. Visual inspections were performed to find out the characteristics of the fracture. Additionally both microscopic characteristics and hardness test were carried out on failed tube samples. Failures seem to happen mainly because the welding process such as preheating and PWHT(post-weld heat treatment) was not conducted strictly. Thus, this paper has the purpose to describe the main cause of the poor welding process and to explain how to prevent similar failures in those weld-joints.

• Korean Chemical Engineering Research
• /
• 제50권4호
• /
• pp.678-683
• /
• 2012

세리아 미세입자는 자동차, 석유공정, 폐수처리 등 다양한 분야에서 촉매로서 널리 쓰이고 있는 중요한 물질이다. 이제까지, 세리아 미세입자를 제조하기 위한 다양한 제조법이 연구되었는데, 본 연구에서는 짧은 반응시간과 간단한 공정이 가능한 초임계 메탄올을 이용하는 입자 제조 공정을 통해 세리아 나노입자를 제조하였다. 회분식 반응기를 이용하여 짧은 시간 안에 세리아 나노입자를 제조하는데 성공하였다. 초임계 메탄올을 이용하여 세리아 나노입자를 제조하는 경우, 다른 첨가제 없이도 약 6 nm의 크기를 갖는 나노입자를 합성할 수 있었다. 이 크기는 같은 온도와 압력조건의 초임계수를 이용하여 표면개질제 없이 합성한 입자보다 훨씬 작은 크기이다. 이는 초임계수와 초임계 메탄올의 밀도 차이와, 초임계 메탄올에서의 세리아 표면에서 일어나는 결정성장을 제한하는 반응, 그리고 초임계 메탄올과 초임계수의 임계점의 차이에서 기인하는 것이다. 또한 여러 가지 유기물을 표면개질제로 첨가하여 표면을 개질한 세리아 나노입자를 제조하였으며, FT-IR과 HR-TEM, TGA를 통해 이를 확인할 수 있었다. 표면을 개질한 세리아 나노입자는 표면개질을 하지 않은 세리아 나노입자와는 다르게, 유기용매에 대한 분산성이 뛰어났으며, 표면개질제로 사용하는 유기물의 양과 종류를 조절함으로써 세리아 나노입자의 크기와 모양을 조절할 수 있었다.

• 임산에너지
• /
• 제24권1호
• /
• pp.39-46
• /
• 2005

본 연구에서는 연속형 초임계수 분해장치를 이용하여 처리온도 별로 현사시목재의 당화 가능성과 현사시목재 각 성분의 분해특성을 분석하였다. 미세하게 분쇄한 현사시목분을 물의 초임계압력(23MPa) 조건하에서 각각 아임계온도$(275^{\circ}C,\;325^{\circ}C)$와 초임계온도$(375^{\circ}C,\;415^{\circ}C)$에서 각각 2분간 처리하였다. 갈색을 띤 현사시목분의 액상분해산물에는 어느 정도의 미분해 고형분이 포함되어 있었다. 초임계수 분해온도가 높을수록 현사시목분의 분해율은 증가하여 초임계조건인 $375^{\circ}C$에서는 현사시목분의 $94\%$까지 분해되었다. 각 처리조건에서 생성된 환원당량을 DNS법으로 측정한 결과, 처리온도가 상승함에 따라 생성된 환원당량은 점차 감소하는 경향을 나타내었다. 이는 반응 초기에 생성된 환원당들이 높은 온도의 반응기를 통과하면서 열분해와 유사한 화학적 반응에 의해 더욱 분해되어 퓨란계 화합물로 전환된 것으로 예측되었다. 리그닌의 분해특성을 살펴보기 위하여 액상의 분해산물을 ethylacetate로 추출하여 유기용매 가용부를 GC-MS로 분석하였다. 리그닌의 분해산물은 대부분 페놀성 유도체인 vanillin, guaiacol, syringaldehyde, 4-prophenyl syringol과 dihydrosinapyl alcohol등으로 확인되었으며, 이들의 농도는 처리온도가 상승함에 따라 증가하는 것으로 나타났다. 이러한 리그닌 분해산물은 리그닌고분자의 주요 결합인 에테르 결합이 높은 온도조건하에서 분해에 의한 것으로 예측되었다.