• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.582-582
• /
• 2012

Characteristics of a fusion-driven transmutation reactor was investigated. A compact reactor concept is desirable from an economic viewpoint. For the optimal design of a reactor, a radial build of reactor components has to be determined by considering the plasma physics and engineering constraints which inter-relate various reactor components. In a transmutation reactor, design of blanket and shield play a key role in determining the size of a reactor; the blanket should produce enough tritium for tritium self-sufficiency, the transmutation rate of waste has to be maximized, and the shield should provide sufficient protection for the superconducting toroidal field (TF) coil. To determine the radial build of the blanket and the shield, not only a radiation transport analysis but also a burnup calculation were coupled with the system analysis and it allowed the self-consistent determination of the design parameters of a transmutation reactor.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2003년도 학술대회 논문집
• /
• pp.276-279
• /
• 2003

The superconducting synchronous machine(S.S.M) including generator and motor has different electromagnetic structure from the conventional machine. With the help of superconductor having much higher operating current density than normal conductor, S.S.M can eliminate most of iron core filling inside of the conventional machine. This air-cored structure could be analysed and designed theoretically based on 2-dimensional(2-D) magnetic field distribution assuming that the windings are extended infinitely toward the axial direction. However the actual structure of S.S.M has the end regions interconnecting the straight parts of the same cross-section with the 2-D model. Therefore, this actual 3-D model has smaller field distribution than the 2-D model. In this paper, we consider the effect of the end regions on the output of a HTS model motor and suggest more accurate design approach through comparison of 2-D and 3-D magnetic field analysis.

• 한국전기전자재료학회논문지
• /
• 제16권1호
• /
• pp.70-76
• /
• 2003

For the development of superconducting power apparatus, it is necessary to establish the dielectric technology in coolant like L$N_2$. Therefore in this paper we conducted experiment of surface flashover that could occur in the windings of HTS transformer which will be developed in the pancake coil type. First, we distinguished two types of surface flashover by electrode alignment, such as parallel and vertical, and then compared with each characteristics of surface flashover. The flashover voltage was more affected by thickness of spacer than by surface length when the thickness of spacer is over 1 mm. And the surface flashover with metallic particle attached on the spacer was tested, it was affected by the particle position. The more close to the electrodes, the worse the characteristics. Also the experiment was conducted when the electrode was immersed in liquid nitrogen(L$N_2$) partially. The surface flashover characteristics of spacer was, when immersed partially in 50%, rapidly decreased.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2018년도 제58차 하계학술대회논문집 26권2호
• /
• pp.179-180
• /
• 2018

자계 검출 센서는 여러 가지 종류가 있으나 벽면에 흐르는 미소 자계 및 차폐 전선에서 검출이 가능한 구조는 초전도 양자 간섭 소자(SQUID)가 주로 사용되지만 가격 및 물성 재료 특성으로 인하여 특수 용도로 사용되고 있다. 이에 본 연구에서는 전선으로부터 발생되는 저주파 자장을 검출할 수 있고 휴대성 및 가격이 저렴한 구조인 코일형 자계측정기를 개발하기 위해 자기 코어 및 코일 Turn수 변화에 따른 자계 검출 감도를 조사하여 최적의 구조를 설정하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 A
• /
• pp.241-243
• /
• 1997

0.7 MJ, 100 kVA UPS용 초전도 펄스 코일 제작을 위해 수 kA급 초전도 도체의 권선장력-퀜치전류사이의 관계를 실험적으로 조사하였으며, 시험결과에 근거하여 코일제작시 한계 권선장력을 도출했다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.587-589
• /
• 2000

In this paper, the stability criterion for cryocooler-cooled high-temperature superconducting (HTS) coils is discussed. We choose the current, Itr at which "thermal runaway" occurs, as a stability criterion and adopt the relationship between the cooling power of GM cryocooler and the heat generation in coil system to evaluate Itr. We also investigate the transient behavior during a quench process in HTS coils by a newly developed FEM computer program.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 A
• /
• pp.235-237
• /
• 1999

This paper has proposed a method to estimate effective length of a 30 KVA super-conducting generator using 3-dimensional FEM program. Flux linkage of the stator coil is calculated by the FEM program and the induced voltage is computed using the simple Faraday's law.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제53권11호
• /
• pp.658-663
• /
• 2004

According to the improvement of the HTS wires performance, several tapes of HTS superconducting machines are being developed. Stacked HTS tapes are used as conductor that can flow high current for the HTS power machines. To develop the HTS power machines, the critical current characteristics of a stacked HTS tapes in external filed and AC losses should be examined. In this paper, we present characteristic of the stacked HTS tapes and AC losses of HTS pancake windings with stacked tapes. AC loss of the pancake winding were measured and compared with the calculated loss by using AC loss data of the stacked samples and the magnetic flux density in the HTS winding under operating conditions. We can see that measured results generally agree well with the calculated results by using AC loss data of 4-stacked sample.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 춘계학술대회 논문집 에너지변화시스템부문
• /
• pp.12-14
• /
• 2009

초전도 DC 마그네트에 영구전류 (Persistent Current)를 흘리기 위해서는 초전도 접합(Superconducting Joint)이 필요하다. 저온 초전도 선재는 초전도 접합이 가능하며 고온 초전도체 중 BSCCO 선재로도 초전도 접합을 만들 수 있다. 그러나 최근 개발되어 향후의 초전도기기에 적용될 2세대 초전도 선재인 ReBCO CC(Coated Conductor)로는 아직 초전도 접합을 만들 수 없다. 본 연구에서는 광폭 선재의 중심을 가르고 양 종단부가 그대로 붙여진 형태의 선재를 이용하여 영구전류를 홀릴 수 있는 고온 초전도 마그네트를 제작하였다. 영구전류 초기 충전을 위하여 1.2 m 길이의 ReBCO 도체 종단부에 스테인리스 히터를 부착하여 영구전류 스위치를 구성하였다. 발생된 자기장의 시간적 균일성을 측정하기 위하여 34 시간동안 홀센서를 사용하여 대기압 액체질소 77.3 K에서 자기장을 측정하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.553-556
• /
• 2008

A Magneto Plasma Sail(MPS) produces propulsive force by the interaction between the solar wind and an artificial magnetic field inflated by injecting plasma. Using a 2D hybrid PIC code, we evaluate the inflation of magnetic field when Argon(Ar) plasma with different ${\beta}_{in}$ including the value less than one is injected into the dipolar magnetic field generated by a superconducting coil. It is found that the magnetic field can be inflated by injecting plasma within an angle of $30^{\circ}$ in the polar direction and the magnetic field decays in the polar direction according to $B{\propto}r^{-2.4}$ after the plasma(${\beta}_{in}$=0.1) is injected.