• Proceedings of the Korea Concrete Institute Conference
• /
• 1997.04a
• /
• pp.177-185
• /
• 1997

The purpose of this study is to investigate the mechanical properties of super-workable concrete using O.P.C., blast-furnace slag, and fly ash respectively. For this purpose, after determining the optimum mix proportion of super-workable concrete according to unit weight of binder and percentage of fine aggregate respectively, mechanical properties of super-workable concrete such as compressive, tensile and flexural strength as well as elastic modules were tested and analyzed. Also, the mechanical performances of super-workable concrete were compared with those of high-strength concrete with equal mix proportion of concrete. As a result, super-workable concrete have an excellent mobility, placeability, and segregation-resistance, but the strength of super-workable concrete was shown to be somewhat lower than that of high-strength concrete with equal mix proportion of concrete.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2008.11a
• /
• pp.85-88
• /
• 2008

As super-high-strength concrete uses a large amount of binder, there is an autogenous shrinkage strain larger than dry shrinkage and it degrades the quality of structures. Thus, we need a technology to minimize the shrinkage strain of super-high-strength concrete. Accordingly, the present study prepared super-high-strength concrete with design strength of over 100MPa and, using an embedded gauge, measured the shrinkage strain of free shrinkage specimens for super-high-strength concrete containing expansion agent. According to the results of this study, the expansion rate of concrete increased in the early stage due to the admixture of expansion agent, but the shrinkage rate went down with the lapse of time. The effect of the admixture of expansion agent on compressive strength appeared insignificant. Further research shall be made on different kinds of expansion agents and various mixture ratios for basic analysis to reduce autogenous shrinkage of super-high-strength concrete.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1993.10a
• /
• pp.5-10
• /
• 1993

Recently, owing to efficiency of the concrete work and the rationalization of construction structures, concrete is required to be super high strength. Furthermore, it is take a growing interest in execution and manufacture for super high strength concrete. This study is to investigate and analyze the influenced of flyash affecting on workability and engineering properties of super high strength concrete. In this experiment, the 28day's compressive strength of concrete using 15mm size of aggregate and flyash is over 800㎏/㎠ in the 20°/wt of water∼cement ratio. And the concrete using flyash have higher tensile strength than plain concrete.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.40 no.6
• /
• pp.104-113
• /
• 1998

The purpose of this experimental research is to produce the super-workable concrete using ordinary portland cement, blast-furnace slag lowder, and fly ash respectively, and investigate mechanical properties of super-workable concrete. For this purpose, after production of super-workable concrete for different unit weights of binder and percentages of fine aggregate, optimum mixing proportion of them was determined, and then mechanical properties of super-workable concrete such as static modulud of elasticity as well as compressive, tensile and flexural strength were tested and analyzed. Also, the mechanical performances of super-workable concrete were compared with those of high-strength concrete has an excellent mobility, compactability and segregation-resistance, but the strength of super-workable concrete is somewhat lower than that of high-strength concrete with equal mixing proportions of concrete.

• Journal of the Korea Concrete Institute
• /
• v.28 no.3
• /
• pp.365-373
• /
• 2016

Ultra-High-Performance Steel Fiber-Reinforced Concrete (SUPER Concrete) exhibits improved compressive and tensile strengths far superior to those of conventional concrete. These characteristics can significantly reduce the cross sectional area of the member and the anchorage strength of a headed bar is expected to be improved. In this study, the anchorage strengths of headed bars with $4d_b$ or $6d_b$ embedment length were evaluated by simulated exterior beam-column joint tests where the headed bars were used as beam bars and the joints were cast of 120 or 180 MPa SUPER Concrete. In all specimens, the actual yield strengths of the headed bars over 600 MPa were developed. Some headed bars were fractured due to the high anchorage capacity in SUPER Concrete. Therefore, the headed bar with only $4d_b$ embedment length in 120 MPa SUPER Concrete can develop a yield strength of 600 MPa which is the highest design yield strength permitted by the KCI design code. The previous model derived from tests with normal concrete and the current design code underestimate the anchorage capacity of the headed bar anchored in SUPER Concrete. Because the previous model and the current design code do not consider the effects of the high tensile strength of SUPER Concrete. From a regression analysis assuming that the anchorage strength is proportional to $(f_{ck})^{\alpha}$, the model for predicting anchorage strength of headed bars in SUPER Concrete is developed. The average and coefficient of variation of the test-to-prediction values are 1.01 and 5%, respectively.

• Magazine of the Korea Concrete Institute
• /
• v.6 no.6
• /
• pp.135-142
• /
• 1994

The quality characteristics of concrete using super plasticizer in dornestlc rnarket are evaluat ed in order to put to practical use of high performance concrete with high mobility. high strength ard high durability. For this purpose, rune kmds of super plasticizer are compared and analyzed for the slump, air content. unit weight, water reducing percent and ratios of compressive strength wth admixture content. As a result, the optimum quantity of admixture content were obtained for ordinary and high strength concrete using super plasticizer.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.653-656
• /
• 2008

As super.high.strength concrete uses a large amount of binder, there is an autogenous shrinkage strain larger than dry shrinkage and it degrades the quality of structures. Thus, we need a technology to minimize the shrinkage strain of super.high.strength concrete. Accordingly, the present study prepared super.high strength concrete with design strength of over 80MPa and, using an embedded gauge, measured the shrinkage strain of free shrinkage specimens for super.high.strength concrete containing expansion agent. According to the results of this study, the expansion rate of concrete increased in the early stage due to the admixture of expansion agent, but the shrinkage rate went down with the lapse of time. The effect of the admixture of expansion agent on compressive strength appeared insignificant. Further research shall be made on different kinds of expansion agents and various mixture ratios for basic analysis to reduce autogenous shrinkage of super.high.strength concrete.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.11a
• /
• pp.573-576
• /
• 2003

We have developed and applied the super high early strength concrete overlay pavements for repairing asphalts pavements within 24hours. This pavements repairing method by the super high early strength concrete have already applied in U.S.A, japan, England, etc. The super high early strength concrete developed by Ssangyong cement co. for repairing pavements speedily have replaced at No. 2, 17 pavements in managing by Sunchoen national pavements management office. In the results, all of works have finished within 16~24hours after intercepting traffics and all of traffics was opened to be hamonious. In present, this pavements is sound and strong

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.11a
• /
• pp.395-398
• /
• 2005

In recent years, the applications of high-strength concrete have increased, and high-strength concrete has now been used in many parts of the world. The growth has been possible as a. result of recent developments in material technology and a demand for higher-strength concrete in Korea. In this study, we have an object to produce the ultra-high strength concrete(Super-Con) of over 100MPa with low price materials. First, the binders for Super-Con should be selected by the tests; setting time of paste, flow value and strength of mortar. From the test results, the binders are blended with ordinary portland cement, pulverized portland cement and silica fume. Fundamentally the compressive strength, frost resistance and chloride resistance are investigated.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.10a
• /
• pp.573-578
• /
• 2002

We carried out the feasibility study of super early self compacting concrete having the characteristics of 1 day demoulding without steam curing, high flowable concrete with self compacting, high strength and high durability etc. Here, We test and selected by several methods using high early cement with and without admixtures for the condition of super early strength self compacting concrete's manufacture (SSCC). We sucessed to meet at the goal of SSCC with 30∼35N/㎟ in 1 day, without steam curing and with slump flow about 60-65cm and suggest various concrete products to apply the developed SSCC for practical use in factory and in site place