• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.1
• /
• pp.52.1-52.1
• /
• 2019

The Helioseismic and Magnetic Imager (HMI) is the instrument of Solar Dynamics Observatory (SDO) to study the magnetic field and oscillation at the solar surface. The HMI image is not enough to analyze very small magnetic features on solar surface since it has a spatial resolution of one arcsec. Super resolution is a technique that enhances the resolution of a low resolution image. In this study, we use a method for enhancing the solar image resolution using a Deep-learning model which generates a high resolution HMI image from a low resolution HMI image (4 by 4 binning). Deep learning networks try to find the hidden equation between low resolution image and high resolution image from given input and the corresponding output image. In this study, we trained a model based on a very deep residual channel attention networks (RCAN) with HMI images in 2014 and test it with HMI images in 2015. We find that the model achieves high quality results in view of both visual and measures: 31.40 peak signal-to-noise ratio(PSNR), Correlation Coefficient (0.96), Root mean square error (RMSE) is 0.004. This result is much better than the conventional bi-cubic interpolation. We will apply this model to full-resolution SDO/HMI and GST magnetograms.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.629-632
• /
• 2009

The polymeric desiccant rotor is made from the super absorbent polymer by ion modification. The moisture sorption capacity of the super desiccant polymer(SDP) is 4 to 5 times larger than those of common desiccant meterials such as silica gel or zeolite. It is also known that SDP can be regenerated even at the relatively low temperature. To fabricate the desiccant rotor, firstly the SDP was laminated by coating the SDP on polyethylene sheet. Then corrugated and rolled up into a rotor. The diameter, the depth, the dimensions of the corrugated channel, etc. were pre-determined from numerical simulation on the heat and mass transfer in the desiccant rotor. The dehumidification performance was tested in a climate chamber. The relevant tests were carried out at the process air inlet temperature of $32^{\circ}C$, the regeneration air inlet temperature of $60^{\circ}C$ and the inlet dew-point temperature of both the process air and the regeneration air of $18.5^{\circ}C$, when the rotation period is long, the moisture sorption is not effective. In the desiccant rotor developed in this study, the optimum rotation period is found about 350s at the regeneration temperature of $60^{\circ}C$. It was found from further experiments that the optimum rotation tends to decreases as the regeneration temperature increases. Meanwhile, the outlet temperature of the process air deceases monotonically as the rotation period increases.

• Journal of Korea Port Economic Association
• /
• v.27 no.4
• /
• pp.313-346
• /
• 2011

The Roman thinker, Cicero said, "The Nations that rule the sea, rule the world". In the world history, the countries done critical roles, have emphasized the importance of the sea. The world history is called as the histories of the countries which governed the sea, such as Phoenicia, Greece, Carthago, Roma, Portugal, Spain, England, and USA. The sea is not only the political, economical, social and cultural basis, serving as the origin of resources and channel of communication, logistics and distribution but also the area of dreams and imaginations and ground of potentiality and visions. This paper reviewed the major countries and their histories to realize the vision of Korea, super power country of maritime and fishery. Main maritime policies and its core issues and prospects of Korea were reviewed. And on the basis of these reviews, the vision of super power country of maritime and fishery was suggested. The vision, the 5th super power country of maritime and fishery in 2020, and 10th country of maritime technology level in 2020 and their details were proposed also. For achieving the vision, the resurrection of MOMAF is necessary and its reasons and 5 necessities were suggested. And the directions of the resurrection of MOMAF were proposed in terms of two viewpoints, policy/functional and institutional basis. I think Korea, the super power country of maritime and fishery, can be realized only when MOMAF may be resurrected.

• The Journal of Fisheries Business Administration
• /
• v.31 no.1
• /
• pp.33-54
• /
• 2000

This study intends to examine the distribution channel of the most popular ten species caught in Korean coastal and off-shore fisheries with the aid of interviewing fish brokers and cooperative staffs in fish landing markets. This paper finds and emphasizes the following three suggestions, in order to improve the present scheme of fish distribution system. Firstly, annual catch of 10 kinds of fishes is successively decreasing in quantity from 1994 to 1998. Moreover annual catch shows larger variations than fish price and cooperative sales quantity. Except sea eel and sole, cooperative sales accommodates more than 90% of the fish landed, accounting for the small variation in cooperative sales, which invalidates the effectiveness of the free distribution system adopted by the government. Secondly, diversified distribution channels are exposed according to the nature of the fish, the method to harvest, and the quantity caught. Large retailers such as discount stores, super chains and home shopping institutions are actively involving themselves in direct purchase in fish landing markets. Through the analysis of distribution routes, the general distribution channel of fresh fish has been found such as producers longrightarrow fish brokers in landing markets longrightarrow fish brokers in central wholesale markets longrightarrow wholesalers longrightarrow retailers longrightarrow consumers. In order to reduce distribution margin through the analysis of distribution function and distribution margin, this paper presents a new distribution channel such as producers longrightarrow fish brokers in landing markets longrightarrow wholesalers longrightarrow retailers longrightarrow consumers. Thirdly, to improve the fish landing markets, this paper suggests the M&A of uneconomical fish landing markets or renovating toward wholesalers, introduction of processing services and improvement of processing facilities, subsidizing fish brokers in landing markets, revitalization of marketing divisions in cooperatives and improvement in fish auction system.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.2
• /
• pp.189-194
• /
• 2018

Nowadays most integrated circuits are built using the bulk CMOS technology, but it has much difficulty in further reduction of the power consumption and die size. As a super low-power technology to solve such problems, the SOI technology attracts great attention recently. In this paper, the study results of the temperature dependency of the hot carrier effects in the n-channel MOSFETs fabricated on the thin SOI substrate were discussed. In spite that the devices employed the LDD structure, the hot carrier effects were more serious than expected due to the high series resistance between the channel region and the substrate contact to the ground, and were found to be less serious for the higher temperature with the more phonon scattering in the channel region, which resulted in reducing the hot electron generation.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.154-156
• /
• 2008

A prototype of the desiccant cooling system with a regenerative evaporative cooler was built and tested for the performance evaluation. The regenerative evaporative cooler is to cool a stream of air using evaporative cooling effect without an inc6rease in the humidity ratio. It is comprised of multiple pairs of dry and wet channels and the evaporation water is supplied only to the wet channels. By redirecting a portion of the air flown out of the dry channel into the wet channel, the air can be cooled down to a temperature lower than its inlet wet-bulb temperature at the outlet end of the dry channels. Incorporating a regenerative evaporative cooler eliminates the need for deep dehumidification in the desiccant rotor that is necessary to achieve low air temperature in the system with a direct evaporative cooler. Subsequently, the regenerative evaporative cooler enables the use of low temperature heat source to regenerate the dehumidifier permitting the desiccant cooling system more beneficial compared with other thermal driven air conditioners. At the ARI condition with the regeneration temperature of $60^{\circ}C$, the prototype showed the cooling capacity of 4.4 kW and COP of 0.75.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.11
• /
• pp.2143-2159
• /
• 2011

The hybrid architecture of content delivery networks (CDN) and peer-to-peer overlay networks (P2P) is a promising technology enables effective real-time streaming services. It complements the advantages of quality control and reliability in a CDN, and the scalability of a P2P system. With real-time streaming services, however, high connection setup and media delivery latency are becoming the critical issues in deploying the CDN-P2P system. These issues result from biased peer selection without location awareness or content awareness, and can lead to significant service disruption. To reduce service disruption latency, we propose a group-based CDN-P2P hybrid architecture (iCDN-P2P) with a location/content-aware selection of peers. Specifically, a SuperPeer network makes a location-aware peer selection by employing a content addressable network (CAN) to distribute channel information. It also manages peers with content awareness, forming a group of peers with the same channel as the sub-overlay. Through a performance evaluation, we show that the proposed architecture outperforms the original CDN-P2P hybrid architecture in terms of connection setup delay and media delivery time.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.6
• /
• pp.1058-1063
• /
• 2010

In this paper, we designed self-frequency synchronizing circuit using image rejection mixer(IRM) and single-sideband(SSB) up-converter which can effectively eliminate the image frequencies occurred in multi-channel super-heterodyne receivers and help us to match inter-channel phase. Also the self-frequency synchronizing circuit simplifies system because there need no extra devices for making intermediate frequency(IF) by creating the local signal within several nanoseconds by means of generating the same frequency of IF signal and modulating radio frequency(RF) signal. We adopt the limiting amplifier for the purpose of protecting the circuit from spurious signals which come from the front end side having wide instantaneous bandwidth characteristics and constantly injecting same level into the input local signal of IRM. The IRM we fabricated has image rejection ratio of 27dB, which is good over 7dB for foreign company's. Also, the SSB up-converter we fabricated has 1dB compression point of 18dBm, which is good over 16dB for foreign company's. And the size is compact about one-forth.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.9C
• /
• pp.778-785
• /
• 2010

This paper proposes a high-precision ranging scheme based on channel estimation technique and multipath delay analysis in IR-UWB systems. When the IR-UWB signal is transmitted and received, the high-precision ranging is estimated with the time-of-arrival information of the signal. In the proposed scheme, the channel estimation process with the minimum mean square error technique or zero forcing technique is performed and the overlapped multipath within the pulse is analyzed with matrix pencil (MP) algorithm to achieve the ranging accuracy of centimeters. The performance of proposed scheme is evaluated with various IEEE 802.15.4a channel models and the relationship between the ranging performance and the computational complexity is analyzed in terms of the MP parameter values.

• Current Optics and Photonics
• /
• v.8 no.4
• /
• pp.406-415
• /
• 2024

The major error factors that degrade the efficiency of coherent beam combining (CBC) are numerically studied in a comprehensive manner, paying particular attention to phase, tip-tilt, polarization angle, and beam quality. The power in the bucket (PIB), normalized to the zero-error PIB, is used as a figure of merit to quantify the effect of each error factor. To maintain a normalized PIB greater than or equal to 95% in a 3-channel CBC configuration, the errors in phase, tip-tilt, and polarization angle should be less than 1.06 radians, 1.25 ㎛, and 1.06 radians respectively, when each of the three parameters is calculated independently with the other two set to zero. In a worst-case scenario of the composite errors within the parameter range for the independent-95%-normalized-PIB condition, the aggregate effect would reduce the normalized PIB to 83.8%. It is noteworthy that the PIB performances of a CBC system, depending on phase and polarization-angle errors, share the same characteristic feature. A statistical approach for each error factor is also introduced, to assess a CBC system with an extended number of channels. The impact of the laser's beam-quality factor M² on the combining efficiency is also analyzed, based on a super-Gaussian beam. When M² increases from 1 to 1.3, the normalized PIB is reduced by 2.6%, 11.8%, 12.8%, and 13.2% for a single-channel configuration and 3-, 7-, and 19-channel CBC configurations respectively. This comprehensive numerical study is expected to pave the way for advances in the evaluation and design of multichannel CBC systems and other related applications.