• KIEAE Journal
• /
• 제11권6호
• /
• pp.133-138
• /
• 2011

This paper presents energy self-sufficiency simulated in municipal wastewater treatment plants (WWTPs) by adopting solar energy production systems that were simulated by varying azimuth and super-hydrophilic coating on the surface of photovoltaic (PV). Relative to the national average energy consumption in WWTPs, the employment of 100 kW PV system was simulated to achieve 2.75% of energy self-sufficiency. The simulated results suggested that the installation of PVs toward South or Southwest would produce the highest energy self-sufficiency in WWTPs. When super-hydrophilic coating was employed in the conventional PV, 5% of additional solar energy production was achievable as compared to uncoated conventional PV. When 100 kW of PV system was installed in a future test-bed site, Kihyeung Respia WWTP located in Yongin, South Korea, the energy self-sufficiency by solar power was simulated to be 1.77%. The simulated solar power production by azimuth and super-hydrophilic coating will be useful reference for practitioners in designing the solar PV systems in the WWTPs.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1553-1555
• /
• 2008

Super-hydrophobic treated Polyimide film was used as a flexible substrate for developing a new method of metallization. Hydrophilic patterns were fabricated by IN irradiation through shadow mask. Patterned super-hydrophobic substrate was dipped into a bath containing silver nano ink Silver ink was only coated on hydrophilic patterned area. Metal lines of $600{\mu}m$ pitch were fabricated successfully. However, their thickness was too thin to serve as interconnection. To overcome this problem, iterative dipping was conducted. After repeating five times, the thickness of silver metal lines were increased to over than $2{\mu}$. After heat treatment of silver lines, their resistivities were reduced to order of $30{\mu}{\Omega}$-cm the similar level of values reported in other literatures. So, a new method of metallization has high potential for application of RFID antenna and flexible electronics substrates.

• 전기화학회지
• /
• 제3권2호
• /
• pp.81-84
• /
• 2000

This article deals with various photochemical processes occurring at $TiO_2$ surface and its applications in practical living conditions. In the first part, we present an overview of $TiO_2$ photocatalysis under weak W illumination with a special emphasis on bactericidal and detoxification properties of $TiO_2$ films. The second part deals with the photoinduced super hydrophilic TiCt surftce which has a wide commercial applications. In the last part, we present our recent work on boehmite-based super hydrophobic surfaces containing small amount of $TiO_2$ to obtain self-cleaning effect.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.671-674
• /
• 2008

We investigate the slippage effect in a micro-channel depending on the surface characteristics; hydrophilic, hydrophobic, and super-hydrophobic wettabilities. The micro-scale grooves are fabricated on the vertical wall to make the super-hydrophobic surfaces, which enable us visualize the flow fields near walls and directly measure the slip length. Velocity profiles are measured using micro-particle image velocimetry (Micro-PIV) and compared those in the hydrophilic glass, hydrophobic PDMS, and super-hydrophobic PDMS micro-channels. To directly measure the velocity in the super-hydrophobic micro-channel, the transverse groove structures are fabricated on the vertical wall in the micro-channel. The velocity profile near the wall shows larger slip length and, if the groove structure is high and wide, the liquid meniscus forms curves into the valley so that the wavy flow is created after the grooves.

• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 1999년도 제3회 총회 및 추계학술발표회
• /
• pp.3-4
• /
• 1999

• 한국전기전자재료학회논문지
• /
• 제28권5호
• /
• pp.300-305
• /
• 2015

$WO_3$, $SiO_2$, and $TiO_2$ films with hydrophilic property are deposited by rf-magnetron sputtering. Their wettability is strongly depends on the presence or absence of the oxygen plasma etching on the glass substrates. The $TiO_2$ film of 50 nm-thick on the plasma etched glass shows a water contact angle (WCA) below $5^{\circ}$ which means a super-hydrophilic surface. However, WCA values are gradually degraded when the films are exposed under atmosphere, especially $WO_3$. In order to improve hydrophilic property, the degraded films can be again recovered by UV illumination for 10 sec using UV-light and the $TiO_2$ film shows a super-hydrophilic surface about $3^{\circ}$.

• 한국재료학회지
• /
• 제17권3호
• /
• pp.125-131
• /
• 2007

[ $TiO_{2}-solution$ ] was aaded in $SiO_{2}-solution$ by various composition. $SiO_{2}-TiO_{2}$ thin films were obtained by the dip-coating method on the $SiO_{2}$ glass substrates, and then heat-treated at various temperature. Nano-size $TiO_{2}$ particles dispersed $SiO_{2}-TiO_{2}$ films showed absorption peak by quantum size effect at short wavelength region $350{\sim}400nm$, which made them good candidates for non-linear optical materials and photo-catalytic materials. The thickness of $SiO_{2}-TiO_{2}$ films were $300{\sim}430nm$. The contact angle of $SiO_{2}-TiO_{2}$ films for water was $5.3{\sim}47.9^{\circ}$, and therefore it is clear that $SiO_{2}-TiO_{2}$ films have super hydrophilic properties and the self-cleaning effects.

• 한국재료학회지
• /
• 제18권4호
• /
• pp.211-217
• /
• 2008

A $ZrO_2$ coating solution containing $ZrO_2$ photo-catalysis, which is transparent in visible light, was prepared by the hydrolysis of alkoxide, and thin films on the $SiO_2$ glass substrate were formed in a dipcoating method. These thin films were heat-treated at temperatures ranging from $250^{\circ}C-800^{\circ}C$ and their characteristics were subjected to thermal analysis, XRD, spectrometry, SEM, EDS, contact angle measurement, and AFM. Tetragonal $ZrO_2$ phase was found in the thin film heat treated at $450^{\circ}C$, and anatase $TiO_2$ phase was detected in the thin film heat-treated at $600^{\circ}C$ and above. The thickness of the films was approximately 300 nm, and the roughness was 0.66 nm. Thus, the film properties are excellent. The films are super hydrophilic with a contact angle of $4.0^{\circ}$; moreover, they have self-cleaning effect due to the photo catalytic property of anatase $TiO_2$.

• 한국세라믹학회지
• /
• 제36권11호
• /
• pp.1211-1216
• /
• 1999

TiO2 thin films were prepared by reactive magnetron sputtering on glass substrate and subjected into investigation about their hydrophilic properties. Varing Ar/O2 ration and post annealing at 50$0^{\circ}C$ for 12h anatase and rutile phases of TiO2 films were obtained. Hydrophilic properties were evaluated by determination of contact angle of water droplet on TiO2 surface. On as-annealed TiO2 films water droplet spreaded widely with ~0$^{\circ}$contact angle. Sonication(60 Hz, 28kHz 40kHz) and following dark room treatments turned these hydrophilic TiO2 films into hydrophobic state. All of hydrophobic films were converted recersibly into their original state after UV illumination. Hydrophobic states of anatase films were saturated after sonication and remain same during dark room treatment. But it was found that the conversion into hydrophobic state of rutile films progressed. further after sonication. Therefore it was concluded that Ti3+/Ti+4 ratio is the key to determine hydrophilicity of TiO2 surface so that different surface structure of polymorphs could lead to unique characteristics.

• 한국결정성장학회지
• /
• 제24권1호
• /
• pp.33-40
• /
• 2014

전기방사법(Electrospinning technique)을 이용하여 PVdF-HFP(Poly vinylidene fluoride-co-hexafluoropropylene) 멤브레인을 제조하고, 그 멤브레인 표면위에 DLC(Diamond-like carbon) 코팅공정을 적용하여 멤브레인의 표면변화 및 접촉각 변화를 조사하였다. Ar 플라즈마 처리시간 및 처리조건에 따라 PVdF-HFP 멤브레인 파이버 표면이 주름(wrinkles)형태로 변화 하였다. 이러한 Ar 플라즈마 처리가 된 PVdF-HFP 멤브레인은 초친수성(super-hydrophilic) 특성으로 변했지만, 초친수성 PVdF-HFP 멤브레인에 DLC 코팅공정을 적용하면 반대로 초소수성(super-hydrophobic) 특성으로 변화되었다. 이러한 특성을 가진 표면을 접촉각 측정과 XPS, FE-SEM 측정으로 분석하였다. 따라서 화학적 조성과 표면 형상에 의해 접촉각 특성을 가지는 것으로 확인하였다.