• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1618-1619
• /
• 2003

개방형 스페이서(barrier)가 적용된 가스 절연개폐장치(GIS)에 외장형 부분방전(PD) 센서를 적용 하고 센서장착부, 인근 스페이서 또는 부싱으로 유입되는 광대역 잡음신호의 투과율을 10 - 2000 MHz의 극초단파 영역에서 측정하였다. 또한 간단한 금속 차폐체에 의한 잡음신호의 감쇄효과도 측정 하였다. 스페이서 또는 부싱을 통하여 인근센서에 유입되는 잡음의 크기는 차폐시와 대비하여 약 25 dB 증가하였다.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1843-1844
• /
• 2003

154 kV급 가스절연개폐장치(GIS)용dp 장착할 수 있는 내장형 극초단파 (UHF) 부분방전(PD) 센서의 고주파 특성을 전산모사 하였다. UHF PD 센서는 일종의 광대역 안테나이므로 3차원 전자기장 해석도구를 활용하여 주파수 또는 시간 영역에서 고주파특성을 해석하였다. 센서의 구조를 결정하는 센서장착용 구멍과 센서의 크기를 변수로 조절하면서 내장형 UHF PD 센서의 특성을 해석 하였다. 센서가 장착되는 구멍의 크기와 센서의 구조변화에 따라 반사손실이 변화하였으며 GIS의 전파 mode의 영향을 받는다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.1056-1061
• /
• 2004

The vibration of rotor systems is caused by various factors, such as misalignment, unbalance, gear meshing, error of assembly, etc. Modal test and TDA/ODS analysis were done. The dynamic analysis of the armature was done with SAMCEF which is a commercial software for finite element and kinematic analysis. The transient response of the armature is calculated by the SAMCEF with the consideration of magnetic force and bearing stiffness, which are the essential elements for the design of high speed cutter. Main frequency of the vibration is due to the unbalance of the armature. The FEM analysis model considering unbalance and the high speed cutter have same vibration properties. The vibration sources of the high speed cutter is proved to be unbalance.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.11a
• /
• pp.119-124
• /
• 2000

The 3-stage centrifugal compressor is used in order to measure the noise spectra of compressor, and analyze the results. Two cases are investigated for compressor noise components. Case I includes total system such as compressor, inter-cooler, motor, and Case II excludes cooling system. BPF tonal noise is important in compressor, and cooling system including inter-cooler contributes to broadband noise. Also, motor, gear box, and motor cooling fan are the second contributions to total compressor noise. Centrifugal compressor flow-field is calculated using two-dimensional grid and Navier-Stokes equations. Static pressure increases, and total pressure decreases, as air passes through the compressor components.

• Analytical Science and Technology
• /
• v.26 no.4
• /
• pp.276-286
• /
• 2013

This study was performed to investigate the contents characteristics of hazardous oil wastes and wastes of liquid fuels from different industrial process. In order to establish a hazardous waste list, samples of various industrial discharge have been analyzed for 16 non-regulated inorganic hazardous substances (i.e., Cu, Pb, Cd, CN, Hg, As, T-Cr, $Cr^{6+}$, Sb, Ni, F, V, Ba, Zn, Be, Se). In more detail, hazardous waste samples including waste hydraulic oils, waste engine, gear and lubricating oils, waste insulating and heat transmission oils, bilge oils, oil/water separator contents processing were collected from 37 workplaces and analyzed. We observed that the most of the inorganic substances exceeded the proposed criteria in many samples. Especially the concentration of Sb in heat transmission oil, bilge oil and gear & lubricating oils were ranged from 6 to 419 mg/kg whereas the proposed criteria is 50 mg/kg. The assessment result of hazardous waste in Korea according to the EWC showed that the out of 24 processes, 16 belongs to absolute entry and 8 belongs to mirror entry. In conclusion, we expect the outcome of this study to align the classification system of hazardous waste management in South Korea with international legislations, and consequently contribute to reduce environmental pollution as well as health risks by toxic wastes.

• Journal of Ocean Engineering and Technology
• /
• v.31 no.3
• /
• pp.233-240
• /
• 2017

Subsea structures are always vulnerable to accidental risks induced by fishing gear, dropped objects, etc. This paper presents the design of a subsea manifold protective structure that protects against dropped object impacts. Probable dropped object scenarios were established considering the shapes and masses of the dropped objects. A design layout for the manifold protective structure was proposed, with detailed scantlings and material specifications. A method applicable to the pipelines specified in DNV-RP-F107(DNV, 2010) was applied to calculate the annual probabilities of dropped objects hitting the subsea manifold. Nonlinear finite element analyses provided the structural consequences due to the dropped object impacts such as the maximum deflections of the protective structure and the local fracture occurrences. A user-subroutine to implement the three-dimensional fracture strain surface was used to determine whether local fractures occur. The proposed protective structure was shown to withstand the dropped object impact loads in terms of the maximum deflections, even though local fractures could induce accelerated corrosion.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.10
• /
• pp.104-110
• /
• 2005

In this paper, unmanned vehicle system and VFF algorithm development with vehicle dynamics is the main topic as a part of Intelligent Transportation System. Unmanned vehicle system is classified by vehicle system and control system. Authors used RC servo motor for longitudinal control via throttle angle, shift lever control, and brake control. For lateral control, authors used step motor, equipped with reduction gear. Unmanned vehicle has nine ultrasonic sensors in front of the unmanned vehicle. After the microcontroller computes the distance between unmanned vehicle and obstacle, the control computer calculates the steering angle enough to avoid the obstacle.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.121-125
• /
• 2009

There have been many developed systems for harnessing the solar energy such as solar water heaters, solar thermal power systems, PV systems, daylighting and solar hydrogen systems. all of them are capable of reducing $CO_2$ emission. However, the efficiency of those systems which work without a solar tracker is lower. This paper is a step by step procedure for fabrication and a performance test of a solar tracking system. The system developed in this study consists of motion controllers, motor drives, step-motors, feedback devices and application. CdS sensors are introduced into the solar tracking system for playing a primary role in poor conditions for tracking due to a gear backlash and a strong wind. Mini-dish was used as a concentrator for collecting sun light. The solar position data, in terms of azimuth and elevation, sunrise and sunset times was compared with those of KASI(Korea Astronomy & Space Science Institute). The results presented in this article provide the high accuracy of the present system in solar tracking and indicate a potential for energy savings.

• Journal of information and communication convergence engineering
• /
• v.7 no.4
• /
• pp.565-569
• /
• 2009

This paper proposed the safety helmet monitoring system based on USN(Ubiquitous Sensor Networks) to secure the wear of helmet for labor on the construction area. As one of the most significant gear to assure labor's safety, The safety helmet would have the extend of labor's injuries minimized whether one wears or not when an accident takes place. At this point, we have developed and demonstrated the system which is able to check who wear the safety helmet properly for labors, composed of safety helmets with sensor node, router nodes, sink node and management program. Moreover, we could show optimized parameters for the proposed USN system as doing experiment and demonstration, we expected that this system would make for labor wear the safety helmet properly on the construction area as well as prevent economic injury caused by an accident with not wearing for labors.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.11a
• /
• pp.240-241
• /
• 2005

The experiments were conducted without oil in a closed refrigerant loop which was driven by a magnetic gear pump. The main components of the refrigerant loop are a receiver, a variable-speed pump, a mass flow meter, a pre-heater and evaporator(test section). The test section was made of a horizontal stainless steel tube with the inner diameter of 4.57 mm, and length of 4 m. The experiments were conducted at mass flux of 200 to 700 kg/$m^2s$, saturation temperature of 0$^{circ}C$ to 20$^{circ}C$, and heat flux of 10 to 30 kW/$m^2$. The test results showed the evaporation heat transfer of $CO_2$ has great effect on more nucleate boiling than convective boiling. The evaporation heat transfer coefficients of $CO_2$ are highly dependent on the vapor quality, heat flux and saturation temperature. In comparison with test results and existing correlations, correlations failed to predict the evaporation heat transfer coefficient of $CO_2$, therefore, it is necessary to develop reliable and accurate predictions determining the evaporation heat transfer coefficient of $CO_2$ in a horizontal tube.