• Journal of the Korea institute for structural maintenance and inspection
• /
• v.9 no.2
• /
• pp.199-206
• /
• 2005

In many other countries framed structures with inadequate lateral strength and stiffness have been strengthened by providing reinforced concrete infilled wall. There is a general agreement among researchers those infilled walls have 3-5times greater lateral strength compared with bare frame. The main objective of this research is to investigate the behavior and strength of reinforced concrete frames infilled with concrete block and cast-in-place reinforced concrete panels used for strengthening the structure against seismic action. For this purpose three 1/3 scale, one-bay, one-story reinforced concrete infilled frames were tested under reversed cyclic loading simulating the seismic effect. The results indicate that infilled walls increase both strength and stiffness significantly under lateral loads. Especially Strength capacity and initial stiffness of CIP infilled wall increased 3.8 times and 6.6 times higher than lightly reinforced concrete frame.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.11
• /
• pp.2169-2177
• /
• 2015

This paper proposes a new pattern matching module to overcome the increased runtime of previous algorithm using RAM, which was designed to overcome cost limitation of hash-based algorithm using CAM (Content Addressable Memory). By adopting Merge FSM algorithm to reduce the number of state, the proposed module contains state block and entry block to use in RAM. In the proposed module, one input string is compared with multiple entry strings simultaneously using entry block. The effectiveness of the proposed pattern matching unit is verified by executing Snort 2.9 rule set. Experimental results show that the number of memory reads has decreased by 15.8%, throughput has increased by 47.1%, while memory usage has increased by 2.6%, when compared to previous methods.

• The Korean Journal of Pain
• /
• v.13 no.2
• /
• pp.191-195
• /
• 2000

Background: Vascular occlusive event is one of the etiologies of sudden sensorineural hearing loss (SNHL). Stellate ganglion block (SGB) induces dramatic and intense vasodilatation in head and neck. Based on this principle, SGB has used as one of the treatment modalities in SNHL. This study was performed to evaluate immediate response of SGB on pure tone audiogram (PTA) in SNHL. Methods: Forty patients were studied. Each patient received daily ipsilateral SGB in paratracheal approach using 0.2% bupivacaine for 2 weeks. On first, third, and fifth day of treatment, we checked their PTA twice 1 hour before (Pre-PTA) and after (Post-PTA) SGB. Pre- and Post-PTA were compared. Several factors were analyzed as a prognostic factor of therapeutic results. Results: Eleven of 40 patients revealed decreased PTA after SGB. Degree of decreased PTA were insignificant ($2.5{\pm}1.6$ dB). Initial and final PTA results was $76.2{\pm}22.5$ and $49.8{\pm}28.3$ dB, respectively. Thirty-one of 40 patients were improved their PTA over 10 dB. The recovery was mainly influenced by the severity of initial hearing loss (P<0.001) and slightly by age (P<0.05). However, the change of PTA after SGB, time interval to receive SGB, sex, site, and number of SGB were not correlated to therapeutic outcome. Conclusions: These results suggest that vasodilatation by SGB has no immediate improvement in SNHL. Therefore, we question whether SGB is beneficial to all patients with SNHL as a therapeutic modality.

• The Korean Journal of Pain
• /
• v.13 no.2
• /
• pp.182-186
• /
• 2000

Background: Ropivacaine is a new amide local anesthetics, having therapeutic properties similar to those of bupivacaine but less cardiovascular toxicity and motor blockade. The aim of this study was to evaluate the effects of ropivacaine used in stellate ganglion block (SGB) compared with those of lidocaine or bupivacaine. Methods: This prospective and crossover study performed in twenty patients with sudden sensory neural hearing loss. All patients received three times SGB, in the paratracheal approach using 8 ml of 1% lidocaine, 0.2% bupivacaine, and 0.2% ropivacaine respectively without any orders. Onset time and action duration of Horner's syndrome were observed after each SGB. Results: Onset time of ropivacaine was the middle of the three agents; earlier lidocaine and slower bupivacaine. Lidocaine ($3.0{\pm}1.9$ min), bupivacaine ($4.1{\pm}2.9$ min) and ropivacaine ($3.3{\pm}1.3$ min). But there were no significant differences; Action duration of Horner's syndrome of ropivacaine (223.6?105.2 min) was longer than lidocaine ($134.6{\pm}77.3$ min) and shorter than bupivacaine ($241.2{\pm}115.8$ min). There were significant differences in the action duration of each local anesthetics (P<0.05). There was no critical side effects and temporary foreign body sensation was the most common side effect. Conclusions: We conclude that ropivacaine is a good alternative in SGB instead of lidocaine or bupivacaine. Ropivacaine is a long acting local anesthetic similar to those of bupivacaine with wide margin of safety. However, optimal concentration and volume of ropivacaine in SGB should be studied.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.37 no.6
• /
• pp.483-489
• /
• 2011

Introduction: This study examined the cumulative resorption of implants placed in a severely atrophic mandible and analyzed the radiologic bone resorption in the marginal bone, after an autogenous bone graft including both block and particulates that had been harvested from the ramus and iliac crest. Materials and Methods: A retrospective study was performed on patients who had bone grafts for augmentation followed by implant installation in the mandible area from 2003 to 2008. Twelve patients (6 men and 6 women) who received 34 implants in the augmented sites were evaluated. Cumulative radiologic resorption around the implants was measured immediately, 3 months, 6 months and 12 months after implant installation surgery. Results: The installed implant in grafted bone showed 0.84 mm marginal bone resorption after 3 months and 50% total cumulative resorption after 1 year. The mean marginal bone resorption around the implant installed in the grafted bone was 0.44 mm after 3 months, 0.52 mm after 1 year, after which it stabilized. The implant survival rate was 97% (failed implant was 1/34). Marginal bone resorption of the installed implant in the autogenous onlay block bone grafts was 0.98 mm after 3 months, which was significantly higher than that of a particulated bone graft (0.74 mm) (P <0.05). Conclusion: An autogenous graft including block type and particulate type is a predictable procedure for the use of dental implants in a severely atrophic mandible. Implant placement in augmented areas show a relatively high survival and minimal bone loss, as revealed by a radiologic evaluation.

• The Plant Pathology Journal
• /
• v.29 no.1
• /
• pp.17-30
• /
• 2013

Barley stripe mosaic virus (BSMV) induces massive actin filament thickening at the infection front of infected Nicotiana benthamiana leaves. To determine the mechanisms leading to actin remodeling, fluorescent protein fusions of the BSMV triple gene block (TGB) proteins were coexpressed in cells with the actin marker DsRed: Talin. TGB ectopic expression experiments revealed that TGB3 is a major elicitor of filament thickening, that TGB2 resulted in formation of intermediate DsRed:Talin filaments, and that TGB1 alone had no obvious effects on actin filament structure. Latrunculin B (LatB) treat-ments retarded BSMV cell-to-cell movement, disrupted actin filament organization, and dramatically decreased the proportion of paired TGB3 foci appearing at the cell wall (CW). BSMV infection of transgenic plants tagged with GFP-KDEL exhibited membrane proliferation and vesicle formation that were especially evident around the nucleus. Similar membrane proliferation occurred in plants expressing TGB2 and/or TGB3, and DsRed: Talin fluorescence in these plants colocalized with the ER vesicles. TGB3 also associated with the Golgi apparatus and overlapped with cortical vesicles appearing at the cell periphery. Brefeldin A treatments disrupted Golgi and also altered vesicles at the CW, but failed to interfere with TGB CW localization. Our results indicate that actin cytoskeleton interactions are important in BSMV cell-to-cell movement and for CW localization of TGB3.

• The KIPS Transactions:PartB
• /
• v.9B no.2
• /
• pp.199-204
• /
• 2002

Since motion estimation and motion compensation methods remove the redundant data to employ the temporal redundancy in images, it plays an important role in digital video compression. Because of its high computational complexity, however, it is difficult to apply to high-resolution applications in real time environments. If we have information about the motion of an image block before the motion estimation, the location of a better starting point for the search of an exact motion vector can be determined to expedite the searching process. In this paper, we present an adaptive motion estimation approach bated on temporal correlations of consecutive image frames that defines the search pattern and determines the location of the initial search point adaptively. Through experiments, compared with DS(Diamond Search) algorithm, the proposed algorithm is about 0.1∼0.5(dB) better than DS in terms of PSNR(Peak Signal to Noise Ratio) and improves as high as 50% compared with DS in terms of average number of search point per motion vector estimation.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.6
• /
• pp.62-69
• /
• 2015

In this paper, a new frame rate up conversion (FRUC) algorithm using adaptive motion estimation (AME-FRUC) is proposed. The proposed algorithm performs extended bilateral motion estimation (EBME) conducts motion estimation (ME) processes on the static region, and extract region of interest with the motion vector (MV). In the region of interest block, the proposed AME-FRUC uses the texture block partitioning scheme and the unilateral motion estimation for improving ME accuracy. Finally, motion compensated frame interpolation (MCFI) are adopted to interpolate the intermediate frame in which MCFI is employed adaptively based on ME scheme. Experimental results show that the proposed algorithm improves the PSNR up to 3dB, the SSIM up to 0.07 and 68% lower SAD calculations compared to the EBME and the conventional FRUC algorithms.

• Fibers and Polymers
• /
• v.4 no.3
• /
• pp.114-118
• /
• 2003

The prepolymer and the final polyurethane (PU) block copolymer were synthesized by reacting 4,4-methylene bis(phenylisocyanate) with poly(tetramethylene glycol) and the prepolymer with 1,4-butanediol as a chain extender, respectively, to investigate the relation between phase separation and it's resulting properties. According to FT-IR data, the phase separation of hard and soft segments in the prepolymer and the PU block copolymer grew bigger by increasing the hard segment content, and the PU showed more dominant phase separation than the prepolymer. The heat of fusion due to soft segments decreased in both the prepolymer and the PU by increasing the hard segment content, whereas the heat of fusion due to hard segments increased in the PU did not appear in the prepolymers. The breaking stress and modulus of the prepolymer increased by increasing the hard segment content, and the elongation at break decreased gradually, and the PU showed the highest breaking stress and modulus at 58% hard segment content. However, the best shape recovery of the PU was obtained at 47% hard segment content due to the existence of proper interaction among the hard segments for shape memory effect. Consequently, the mechanical properties and shape memory effect of the PU were influenced by the degree of phase separation, depending on the incorporation of chain extender as well as the hard segment content.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.5C
• /
• pp.384-392
• /
• 2012

Recently, much research on blind estimation of the interleaver parameters has been performed by using Gauss-Jordan elimination to find the linearity of the block channel code. When using Gauss-Jordan elimination, the input data to be calculated needs to run as long as the square multiple of the number of the interleaver period. Thus, it has a limit in estimating the interleaver parameters with insufficient input data. In this paper, we introduce and analyze an estimation algorithm which can estimate interleaver parameters by using only 15 percent of the input data length required in the above algorithm. The shorter length of input data to be calculated makes it possible to estimate the interleaver parameters even when limited data is received. In addition, a 80 percent reduction in the number of the interleaver period candidates increases the efficiency of analysis. It is also feasible to estimate both the type and size of the interleaver and the type of channel coding.