• 자원리싸이클링
• /
• 제14권6호
• /
• pp.16-20
• /
• 2005

구리, 니켈 그리고 코발트를 함유한 용액으로부터 구리를 선택적으로 분리하기 위하여 $Na_{2}S$를 첨가하여 구리를 CuS로 침전시키는 연구를 행하였다. 구리의 침전율은 용액의 pH가 높을수록, 첨가한 $Na_{2}S$의 양이 많을수록,농도가 낮을수록, 반응온도와 반응시간이 증가할수록 증가하였다. pH 1, $20\%\;Na_{2}S$ 첨가량이 구리의 3 당량비, 온도 $25^{\circ}C$ 그리고 반응시간 30분에서 구리의 침전율은 $94.1\%$이었으며 니켈과 코발트도 각각 $4.3\%$와 $4.5\%$가 침전되었다. 즉 일부 니켈과 코발트 이온이 같이 공침되기 때문에 정량적으로 구리만을 침전, 분리하는 것은 가능하지 않았다.

• 한국해양학회지:바다
• /
• 제13권3호
• /
• pp.271-279
• /
• 2008

해저열수광상은 황화물 미네랄이 해저의 열수작용을 통해 형성된 광상을 의미하며 특히, 구리, 납, 아연, 금, 은 등의 금속이 다량 포함되어 있다. 현재 해저열수광상 개발분야의 선두주자는 노틸러스사이다. 노틸러스사는 파푸아뉴기니, 피지, 통가, 솔로몬제도, 뉴질랜드 등 남서태평양 도서국에 약 37만 $km^2$에 달하는 탐사권을 보유 또는 신청해 놓은 상태이다. 넵튠사 역시 뉴질랜드, 파푸아뉴기니, 마이크로네시아에서 27만 $km^2$가 넘는 면적의 탐사권을 취득하였다. 이들 두 광업회사는 2010년 세계 최초로 해저열수광상의 상업생산을 목표로 적극적인 활동을 전개하고 있다. 주변국가인 중국과 일본은 전략광물의 안정적 공급을 위하여 해저열수광상 탐사활동을 적극적으로 수행하고 있는 실정이다. 중국의 경우 중국대양협회를 통해 전 지구 대양을 대상으로 심해저자원개발을 위한 국가연구개발사업을 수행하고 있다. 일본의 경우 자국의 EEZ를 중심으로 해저열수광상 조사사업을 수행하고 있다. 이러한 국제적인 해저열수광상 개발동향을 고려하여 우리나라의 해저열수광상 개발을 위한 전략방향을 소관부처의 일원화와 법제도 정비, 사업추진주체 결정, 정부의 적극적 예산지원, 해저열수광상 개발을 위한 중장기 계획수립 등의 측면에서 제안하였다.

• 자원리싸이클링
• /
• 제21권6호
• /
• pp.51-57
• /
• 2012

본 연구의 목적은 금풍광산 광물찌꺼기 내 중금속의 광물학적 특성을 조사하고, 중금속 제거를 위한 부유선별 실험을 하였다. 광물학적 분석 결과, 휘동석, 유비철석, 황철석, 섬아연석, 방연석 등 황화광물이 존재하였다. 카드뮴과 다른 중금속(Cu, Pb, Zn)의 상관관계를 살펴보면 Cd는 Zn과 좋은 양의 상관관계를 가졌다. K.A.X.(Potassium Amyl Xanthate)와 Aerofloat 211을 포수제로 사용한 부유선별 실험 결과 광물찌꺼기 내 잔류 중금속(As, Cd, Cu, Pb, Zn)의 농도가 토양오염기준치를 만족하는 결과를 얻었다.

• 한국자원리싸이클링학회:학술대회논문집
• /
• 한국자원리싸이클링학회 2005년도 춘계임시총회 및 제25회 학술발표대회
• /
• pp.173-177
• /
• 2005

• 자원환경지질
• /
• 제4권2호
• /
• pp.77-90
• /
• 1971

About four hundred deposits of iron, talc, fluorite, tungsten, molybdenum, lead, zinc and other polymetallic mineral deposits were plotted on the Ore Distribution Map of the Ockcheon Geosynclinal Area. These mineral deposits plotted on the map can be divided into the several metallogenic zones by the consideration of their geologic background including the sedimentary and tectonic cycles and the igneous activities in the geosynclinal evolution, as follows: a. Chungju iron and talc zones. b. Cheong-san copper bearing iron sulphide zone c. Kumsan-Muju fluorite-polymetallic zones. d. Cheong-an Puyong and Ein Suckseong gold zone e. Hwang-gan Seolcheon and Sangju gold zones. Chungju iron zone originated in the iron bed in the Kemyongsan Series corresponding to the Pre-Ockcheon Cycle of evolution history. In early period of the Ockcheon Cycle, Hyangsanri quartzite and Munjuri phyllitic formation corresponding to the lower terrigenous sequence were not mineralized while the next sequence of the Samsungsan basic igneous-metamorphic formation and the Changri limestone formation were mineralized by the copper bearing iron sulphide and the fluorite-polymetallic deposits respectively. Two generations of the gold zones are recognized. The earlier generation distributes directionaly in the outside of the Ockcheon sedimentary belt was followed by the earlier grantitic invasion of Jurasic in age, while the later generation scatters at random which was related to the nondirectional Cretaceous granitic intrusion of the Post-Ockcheon Cycle. Conclusively speaking, it was disclosed that the endogenic mineralization in the Ockcheon geosyn clinal zone was not conspicuous in its inner sedimentary belt except its limestone area but in its outer peripheral granitic or gneissic zones, and the related igneous activities occured in the Post-Ockcheon Cycle of evolution history.

• 자원리싸이클링
• /
• 제22권6호
• /
• pp.48-54
• /
• 2013

니켈, 코발트와 철의 혼합용액에 미량 함유되어 있는 구리 (399 ppm 구리, 208 ppm 철, 15.3 g/L 니켈, 2.1 g/L 코발트)를 분리, 제거를 위한 방법들을 검토하였다. 중화침전법의 경우 용액의 pH가 7.0 에서 구리는 철과 함께 전부 수산화물로 침전, 제거되었으나 니켈과 코발트의 일부도 함께 침전되었다. 황화침전법의 경우 1.25% 농도의 $Na_2S$를 구리의 2당량비 첨가하고 용액의 pH가 1.0인 경우 구리가 99.7% 제거 되었다. TP207 양이온 흡착제를 사용한 이온교환수지법은 평형 pH 2.0 에서 구리만이 선택적으로 흡착되었으며 탈착용액으로는 5% 황산이 적당하였다.

• 자원환경지질
• /
• 제2권3호
• /
• pp.58-67
• /
• 1969

Songgwang lead zinc mine is located in about 12km to the north-east of Jeonju City. Geology of the mine and its visinity is consisted of Jeonju series belonged to so-called Okcheon system, Seodaesan tuff formation, Silla series, and the quartz porphyry intruded into these formations. Jeonju series comprising 3 formations; that is, of Sadaeri, Sindong, and Girinbong. Jeonju series is generally distributed in southern part of the area, striking NNW, and diping NE $30^{\circ}$, or NW $30^{\circ}$. It is deformed to form synclinorium and anticlinorium plunging to the north with low angle. In the northern part of the area, Jeonju series was cut by Sinpeongri-fault of NEE direction near Sinpeongri. In the north side of the fault, it is overturned and shows NEE or NWW strikes and NW $60^{\circ}$ dips. At the west of Songgwangri, it is cut by 3 thrusts; the two are almost parallel each other, and the third oneis manifested by the fact that the lower black shale zone thrusted over the upper limestone. Songgwangri thrust, so named, is a post-mineral fault and its plane represents a premineral slip plane. Enrichment of are took place along the bedding plane or fissure parallel to it, as seen in adit No. 1 or No. 2 along the floor of the thrust, and along the sheared zone or the brecciated zone oblique to the plane near the thrust in crystalline limestone of Sindong formation as observed in the underground levels of inclined slope. Ore minerals are chiefly zincblende, galena, pyrrhotite, arsenopyrite, acompanied pyrite and chalcopyrite, and contain Au and Ag. In earlier stage of mineralization, the limestone was recrystalized, and sulphide minerals were enriched in the· permiable zone said above by pyrometasomatism, and in later stage the limestone was affected chloritization and sericitization. However hydrothermal replacement was weak, so that enrichment did not took place. It seems that minerallizing materials came up through the premineral slip plane and injected, and replaced the limestone in permiable zone said above with sulphide are minerals. Then Songgwangri thrust took place and, the lower black shale zone thrusted upon crystalline limestone.

• 자원환경지질
• /
• 제8권4호
• /
• pp.183-201
• /
• 1975

The south and southwestern parts of Jeonra-namdo has been known as an alunite province in Korea. The alunite deposits investigated for the present study are Okmaisan, Seongsam, Bugog, Gasado south, Gasado north, Jangsando, Dogcheon and Jungyongri deposits. The main purpose of this study is to depict the genetical origin of the alunite deposits. The rocks distributed in the areas mentioned above consist chiefly of rhyolitic tuff, breccia tuff and andesitic tuff of Cretaceous age which represent different episodes of volcanic activities during Cretaceous epoch. The attitude of bedding of the tuffaceous rocks varies from place to place but generally dips very gently. The alunite deposits are embedded mostly in the rhyolitic tuff so that they appear as layered deposits, this occurrence may be the result of stratigraphic and lithologic controls. The result of this study can be summarized as below. The mineral sequence studied by the mineral paragenesis and the result of the spectrograph anlyses is such that (1) alunite was formed at first and pyrophyllite was nearly contemporaneous with alunite but pyrophyllite formation can be recognized as a secondary mineralization products, (2) kaoline was succeeded to form later and hematite finally deposited, and (3) pyrite was deposited from the begining to the end of the above mineralization period. The compositional change of host rocks is such that CaO, $SiO_2$ and $Na_2O$ were largely removed from the parent rocks and some $Al_2O_3$ and $SO_3$ were transported by the solution so as to enrich the rocks. The sequencial process of such mineralization has resulted in forming those distinguish mineral zones; alunite, kaoline, pyrophyllite, silicifide and sulphide zone which manifest irregular shape. These deposits were formed by hydrothermal solution which was possibly low temperature and contained sulphuric acid originated from $H_2S$ and $SO_2$ gases.

• 한국광물학회지
• /
• 제18권2호
• /
• pp.127-134
• /
• 2005

금속제련공학 및 환경과학 분야에 있어서 물질전체를 구성하고 있는 화학적 조성이 중요한 요소이나, 입자 표면의 화학조성과 미분화된 입자들의 표면 반응성을 제어함과 동시에, 입자 계면에서 일어나는 중금속과 유기물질등의 반응은 제련공정과 환경오염에 중요한 역할을 한다. 그러므로, 수용액상에 존재하는 여러 종류의 화학 물질과 광물입자 표면 사이에서 일어나는 계면반응 과정의 이해는 상당히 중요한 것이다. 일반적으로 입자 표면 분석에는 ex-situ 법을 사용하는 X-ray photo-electron spectroscopy (XPS) 분석 방법이 많이 적용되고 있으나, 이는 분석대상시료의 크기가 보통 100 마이크론에서 1 cm 정도의 범위 안에 혼재-혼합되어있는 고체 입자들을 분석하기 때문에 채취 분석된 X-ray의 원래 발산한 입자표면을 분석할 수는 없다. 그래서 본 연구에서는 Time-of-Flight Secondary-Ion Mass Spectroscopy (TOF-SIMS)를 응용하여 황화광물의 부유선광 공정 중 생성된 미세한 유화광물입자$(30\~75\;microns)$ 표면에 형성된 무기, 유기물의 반응 관찰을 통해 이들의 정성분석 및 상대적 정량분석법을 연구하고자 하였다.

• 자원환경지질
• /
• 제17권2호
• /
• pp.91-100
• /
• 1984

The Gwangyang gold deposits geologically consist of granitic gneiss, metatectic gneiss and porphyroblastic gneiss which correspond to Jirisan gneiss complex. The formations of Gyeongsang system lies unconformably on these gneisses and are intruded by diorite, porphyritic andesite and Bulgugsa granites. Goheung districts are composed of quartz schist, andesitic rock, tuff and granite. The Gwangyang gold deposits are gold bearing fissure filling veins. The vein thickness varies from 15cm to 40cm and they consist of 7-10 layers in parallel. The Goheung copper deposits are sulphide bearing quartz veln which filled the fracture in andesitic rock and biotite granite. The contact zone of these rocks is partially altered. The mineral paragenesis of the Gwangyang and Goheung districts is pyrite, arsenopyrite, pyrrhotite, chalcopyrite, sphalerite, galena, sericite, quartz and calcite. The variation trends of FMA and A'KF triangular diagrams and the differentiation index (norm, Q + Or + Ab) versus oxides diagrams is similar to the Gyeonsang basin igneous rocks. From the trace element analysis of 10 samples of country rocks, wall rocks and veins, the distribution of copper and lead contents display a correlative distribution pattern in relation to gold and silver. Homogenization temperature of fluid inclusions range from $200^{\circ}C$ to $270^{\circ}C$ in quartz from the Gwangyang gold vein and the size of fluid inclusion range from 0.01mm to 0.04mm. The fluid inclusions are mainly one or two phase and the filling degree of the inclusions varies from 85 to 95.