• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.487-488
• /
• 2006

Novel bisphenol-based wholly aromatic poly(ether sulfone-ketone) copolymer containing pendant sulfonate groups were prepared by direct aromatic nucleophilic substitution polycondensation of 4,4-difluorobenzophenone, 2,2'-disodiumsulfonyl-4,4'-fluorophenylsulfone (40mole% of bisphenol A) and bisphenol A. Polymerization proceeded quantitatively to high molecular weight in N-methyl-2-pyrrolidinone at $180^{\circ}C$. Organic-inorganic composite membranes were obtained by mixing organic polymers with hydrophilic $SiO_2$ (ca. 20nm) obtained by sol-gel process. The polymer and a series of composite membranes were studied by FT-IR, $^1HNMR$, differential scanning calorimetry (DSC) and thermal stability. The proton conductivity as a function of temperature decreased as $SiO_2$ content increased, but methanol permeability decreased. The nano composite membranes were found to posse all requisite properties; Ion exchange capacity (1.2meq./g), glass transition temperatures $(164-183\;^{\circ}C)$, and low affinity towards methanol $(4.63-1.08{\times}10^{-7}\;cm^2/S)$.

• 전기화학회지
• /
• 제10권4호
• /
• pp.295-300
• /
• 2007

A new characterization method using a porous plug model was proposed to determine the degree of sulfonation (DS) of ionomer binder with respect to the membrane used in membrane-electrode assemblies (MEAs) and to analyze the fraction of proton pathways through ionomer-catalyst combined electrodes in MEAs for polymer electrolyte fuel cells (PEFCs). Sulfonated poly(ether ether ketone) was prepared to use a polymeric electrolyte and laboratory-made SPEEK solution (5wt.%, DMAc based) was added to catalyst slurry to form catalyst layers. In case of the SPEEK-based MEAs in this study, DS of ionomer binder for catalyst layers should be the same or higher than that of the SPEEK membrane used in the MEAs. The porous plug model suggested that most of protons were via the ionomer binder (${\sim}92.5%$) bridging the catalyst surface to the polymeric electrolyte, compared with the pathways through the alternative between the interstitial water on the surface of ionomer binder or catalyst and the ionomer binder (${\sim}7.3%$) and through only the interstitial water on the surface of ionomer or catalyst (${\sim}0.2%$) in the electrode of the MEA comprising of the sulfonated poly(ether ether ketone) membrane and the 5wt.% SPEEK ionomer binder. As a result, it was believed that the majority of proton at both electrodeds moves through ionomer binder until reaching to electrolyte membrane. The porous plug model of the electrodes of MEAs reemphasized the importance of well-optimized structure of ionomer binder and catalyst for fuel cells.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제5C권4호
• /
• pp.165-170
• /
• 2005

A series of inorganic-organic hybrid membranes were prepared with a systematic variation of titanium dioxide nanoparticle content. Their water uptake, methanol permeability and proton conductivity as a function of temperature were investigated. The results obtained show that the inorganic oxide network decreases the proton conductivity and water swelling. It is also found that increase in inorganic oxide content leads to decrease of methanol permeability. In terms of the morphology, membranes are homogeneous and exhibit good adhesion between inorganic domains and the polymer matrix. The properties of the composite membranes are compared with the standard nafion membrane.

• Korean Chemical Engineering Research
• /
• 제45권4호
• /
• pp.391-395
• /
• 2007

술폰화한 폴리에테르에테르케톤(sPEEK)과 나피온(Nafion) 아이오노머를 혼합한 새로운 전극 바인더를 제조하여 DMFC 용 음극 바인더로서 적용 가능성을 고찰하였다. 새롭게 제조한 혼합 바인더는 높은 수소 이온 전도도와 메탄올 전달 속도 및 낮은 용해도와 우수한 기계적 물성을 나타냈다. 이를 도입한 음극에서 혼합 바인더 함량에 따른 셀 성능을 고찰하였으며, 10 wt% 혼합 바인더를 도입한 음극으로 구성된 셀이 가장 우수한 성능을 나타냈다.

• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 2005년도 춘계총회 및 학술발표회
• /
• pp.60-60
• /
• 2005

• 한국막학회:학술대회논문집
• /
• 한국막학회 2008년도 춘계 총회 및 학술발표회
• /
• pp.162-162
• /
• 2008

• 멤브레인
• /
• 제27권5호
• /
• pp.449-457
• /
• 2017

본 연구에서는 막 결합형 축전식 탈염공정의 단위셀의 단수를 늘려 적층된 10단 형태의 모듈을 설계하여 제작하였다. 아민기가 함유된 폴리설폰(APSf)과 술폰기가 함유된 폴리이서이서케톤(SPEEK)을 합성하였으며 캐스팅법으로 다공성 탄소전극에 코팅하여 제조하였다. 10단 모듈에 대하여 흡착전압 및 시간, 탈착전압 및 시간, 공급액의 유속과 농도 등의 운전 조건과 $CaSO_4$, $MgCl_2$ 등의 2가 이온 용액과 수도수에 대하여 염 제거효율을 측정하였다. 대표적으로 NaCl 100 mg/L의 공급액을 사용하였을 때, 유속 100 mL/min, 흡착조건 1.2 V/3 min, 탈착조건 -0.5 V/5 min에서 98.3%의 염 제거효율을 보였다.

• 한국수소및신에너지학회논문집
• /
• 제33권2호
• /
• pp.164-175
• /
• 2022

In this work, sulfonated poly (ether ether ketone) (SPEEK) composite membranes including strontium zirconate (SrZrO₃) were fabricated by the electrospinning method. Fourier-transform infrared spectroscopic analysis and X-ray diffraction analysis were used to identify the chemical structure and the crystallinity of SrZrO₃ and electrospun composite membranes. The thermal stability of the pure SPEEK and SPEEK/SrZrO₃ electrospun composite membranes were investigated by using thermogravimetric analysis. The physicochemical properties and proton conductivity were enhanced with the addition of different weight ratio of SrZrO₃ nanofiller (2, 4 and 6 wt%) in SPEEK polymer. The optimized SPEEK/SrZrO₃-4 electrospun membrane containing 4 wt% of SrZrO₃ showed a high proton conductivity compared to other electrospun SPEEK/SrZrO₃ composite membranes. The results indicate that electrospun composite membranes incorporating these perovskite nanofillers should be explored as potential candidates for use in proton exchange membrane fuel cells.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2003년도 추계 총회 및 학술발표회
• /
• pp.188-192
• /
• 2003

• 에너지공학
• /
• 제25권3호
• /
• pp.66-72
• /
• 2016

본 연구에서는 술폰화된 sodium 5,5'-carbonylbis(2-fluorobenzene sulfonate) 단량체를 이용하여 친수성 올리고머를 합성한 뒤 소수성 올리고머와 1:1로 공중합반응을 시켜 sulfonated poly(arylene ether ketone) (SPAEK) 공중합체를 합성하였다. 제조한 공중합체의 구조 분석은 $^1H$-NMR, FT-IR, GPC를 사용하여 실시하였고, GPC에서 공중합체의 평균분자량은 $209,700g\;mol^{-1}$, 다분산지수(PDI)는 1.25이었다. 열적 안정성을 확인하기 위하여 TGA 분석을 실시하였고, $200^{\circ}C$이상에서의 열 안정성을 확인하였다. 고분자 전해질 막의 양이온 전도도는 상대습도 100%, $80^{\circ}C$의 온도에서 약 $9.0mS\;cm^{-1}$이었다. 측정된 결과로부터 본 연구에서 제조한 탄화수소계 전해질 막은 술폰화 정도를 증가시키거나 약간의 구조적 변형을 통해 연료전지용 고분자 전해질 막으로 적용 가능할 것으로 기대된다.