• 한국자원공학회지
• /
• 제55권6호
• /
• pp.527-537
• /
• 2018

황산염 함량이 높은 광산배수를 대상으로 황산염환원균(Sulfate reducing bacteria, SRB)을 이용한 생물반응기의 설계인자를 도출하고자 컬럼실험을 수행하였다. 생물반응기의 기질물질로 우분을 기본으로 하여 버섯퇴비를 혼합하고, 보조제로써 볏짚, 석회석을 각각 혼합하여 적용하였다. 우분(70%), 버섯퇴비(10%), 볏짚(20%)을 기질물질로 사용하였을 때 최대 82%의 용존된 총 황 제거효율을 보였고, 체류시간은 2일 일 때 높은 효율을 보였다. 생물반응기 내 광산배수의 흐름이 상향류 일 때 배출수 내 환원형태의 황이 산소와 직접 접촉하면서 재산화되어 제거효율이 감소하는 것으로 나타났다. 황산염환원에 따른 금속 황화물 형성을 유도하기 위한 무기성 슬러지의 주입은 비소의 환원성 용해 및 SRB에 독성을 발현하여 생물반응기의 장기적 운영을 저해할 수 있다. 연구결과, 우분을 포함한 혼합기질물질을 활용한 하향류의 생물반응기가 황산염 및 용존된 총 황을 효과적으로 제거하였고, 이는 황산염 함유량이 높은 염수의 광산배수에서 적용이 가능할 것으로 판단된다.

• 한국환경과학회지
• /
• 제19권11호
• /
• pp.1385-1390
• /
• 2010

Repeated additions of untreated slurry to soil affected ecology and caused high levels of heavy metal in soil and ground water. The objective of this study was to evaluate heavy metal from hanwoo slurry with ferrous sulfate ($FeSO_4{\cdot}7H_2O$), aluminum sulfate [$Al_2(SO_4)_3{\cdot}14H_2O$, alum] and aluminum chloride ($AlCl_3{\cdot}6H_2O$) as a way to improve environmental management in hanwoo industry. The treatment rates, which were incorporated totally within the hanwoo slurry, were 1.0 g and 1.5 g of ferrous sulfate, alum and aluminum chloride/25 g of hanwoo slurry. The various rates of chemical additives significantly increased dry matter (9.98~13.94%) and decreased pH (3.48~6.52) compared with the controls. The use of chemical additives decreased Fe (11~29%), Al (7~12%), Zn (13~36%), and Cu (4~32%) contents, except for Fe in hanwoo slurry with ferrous sulfate and Al in hanwoo slurry with alum and aluminum chloride. In addition, the reduction in heavy metal should be associated with reduction in pH. In conclusion, the results of this study suggest that alum and aluminum chloride additives at rate of 1.5 g were cost-effective management practice that significantly reduces heavy metal from hanwoo slurry, while it may be improved environmental management.

• Journal of Periodontal and Implant Science
• /
• 제32권2호
• /
• pp.325-338
• /
• 2002

Bone graft using growth factors and guided tissue regeneration have been used for the regeneration of infrabony defects which caused by periodontal disease. Calcium sulfate which is one of the resorbable barrier materials used for guided tissue regeneration. Platelet rich plasma which is a easy method to obtain the growth factors had many common points but, platelet rich plasma was still studying. This study was the comparative study between bone graft using platelet rich plasma and guided tissue regeneration using calcium sulfate barrier material in clinical view. For the study, 28 sites(2 or 3 wall infrabony defects) were treated. 14 infrabony defects were received surgical implantation of BBP-calcium sulfate composite with a calcium sulfate barrier and the others received BBP mixed with platelet rich plasma. Clinical outcome was accessed 3 and 6 months of postsurgery. 1. There was no statistical difference between CS group and PRP group in pocket depth, gingival recession, clinical attachment level, and probing bone level at baseline. 2. There was statistically significant reduction in probing depth, clinical attachment level, and probing bone level at 3 and 6 months postsurgery(p<0.05). 3. In the probing depth and clincial attachment level PPR group had less improvement than CS group, but there was no statistically difference at 3 and 6 months postsurgery. 4. In the recession PPR group had less recession than CS group, but there was no statistically difference at 3 and 6 months postsurgery. 5. In the probing bone level PPR group had less improvement than CS group, but there was no statistically difference at 6 months postsurgery. In conclusion bone graft using platelet rich plasma and guided tissue regeneration using calcium sulfate barrier showed similar clinical improvement for the treatment of 2 or 3 wall infrabony defects.

• 한국물환경학회지
• /
• 제21권4호
• /
• pp.403-409
• /
• 2005

Methyl tert-butyl ether (MTBE) contamination in groundwater often coexists with benzene, toluene, ethylbenzene, and xylene (BTEX) near the source of the plume. Then, groundwater contamination problems have been developed in areas where the chemical is used. Common sources of water contamination by BTEX and MTBE include leaking underground gasoline storage tanks and leaks and spills from above ground fuel storage tanks, etc. In oil-contaminated environments, anaerobic biodegradation of BTEX and MTBE depended on the concentration and distribution of terminal electron acceptor. In this study, effect of electron acceptor on the anaerobic biodegradation for BTEX and MTBE-contaminated soil was investigated. This study showed the anaerobic biodegradation of BTEX and MTBE in two different soils by using nitrate reduction, ferric iron reduction and sulfate reduction. The soil samples from the two fields were enriched for 65 days by providing BTEX and MTBE as a sole carbon source and nitrate, sulfate or iron as a terminal electron acceptor. This study clearly shows that degradation rate of BTEX and MTBE with electron acceptors is higher than that without electron acceptors. Degradation rate of Ethylbenzene and Xylene is higher than that of Benxene, Toluene, and MTBE. In case of Benzene, Ethylbenzene, and MTBE, nitrate has more activation. In case of Toluene and Xylene, sulfate has more activation.

• 콘크리트학회논문집
• /
• 제27권6호
• /
• pp.641-649
• /
• 2015

본 연구는 선행연구에서 도출한 다량의 광물질 혼화재를 사용한 고강도 콘크리트(HVMAC)의 내구성을 3성분계 콘크리트(TBC)와 시멘트만 사용한 콘크리트(NC)에 대해서 비교 평가하고자 하였다. 내구성 평가 종류는 염화물 침투 저항성, 동결융해 저항성, 두가지 전처리 조건으로 비교 평가한 탄산화 저항성, 5% 황산($H_2SO_4$), 10% 황산나트륨($Na_2SO_4$) 및 10% 황산마그네슘($MgSO_4$) 용액을 선정하여 황산 및 황산염 저항성 평가를 수행하였다. HVMAC는 모든 재령에서 우수한 염화물 침투 저항성을 나타내었고, 동결융해에 대한 내구성 지수가 100%에 가까운 우수한 결과를 나타내었다. 탄산화 저항성 평가 결과, HVMAC가 TBC보다 저감효과가 있었으며, 양생기간을 증가시켰을 때 콘크리트 내부조직을 치밀하게 만들어 탄산화 저항성을 향상시켰다. 황산 및 황산염 저항성 평가에서 HVMAC가 가장 우수한 것으로 나타났다. 다량의 혼화재 적용에 따른 수산화칼슘 생성량과 $C_3A$가 적어 황산 및 황산염에 의한 열화가 저감된 효과로 강도 감소 및 질량 변화가 작게 나타난 것으로 확인되었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.27-32
• /
• 2002

In this research influences of type and concentration of alkali activator and curing condition on the hydration, and properties of alkali activated blast furnace slag(AAS) concrete were investigated. Sodium carbonate and sulfate were used as alkali activators and their concentration were 4~10 weight percent with Na$_2$O equivalent to binder. The curing conditions were standard curing using 23$^{\circ}C$ water and activated curing chamber at $65^{\circ}C$. Results show that in case of sodium carbonate addition high early strengths were gained by activation of early hydration, but later strength gained was slight. On the other side sodium sulfate strengths were continuously increased with adding amount and ages. Steam curing activated early hydration so that early strengths were improved but later strengths were similar to standard curing. The strength reduction of AAS mortar with sodium sulfate was less than OPC mortar in 5% sulfuric acid solution so that AAS concrete can be useful for acid-resistance concrete.

• 한국대기환경학회지
• /
• 제14권4호
• /
• pp.313-320
• /
• 1998

The most desirable diesel oxidation catalyst (DOC) should have the properties of oxidibing CO and HC effectively at low exhaust gas temperature while minimizing the formation of sulfate at high exhaust gas temperature. Precious metals such as platinum and palladium have been known to be sufficiently active for oxidizing CO and HC and also to have high activity for the oxidation of sulfur dioxide (SO2) to sulfor trioxide (SO3). There is a need to develop a highly selective catalyst which can promote the oxidation of CO and HC efficiently, but, on the other hand, suppress the oxidation of SO2. One approach to solve this problem is to load a base metal such as vanadium in Pt-based catalyst to suppress sulfate formation. In this study, a Pt-V catalyst was prepared by impregnating platinum and vanadium onto a Ti-Si wash coated catalyst in a laboratory reactor by changing the formulations and reaction temperatures.

• 한국환경과학회지
• /
• 제13권1호
• /
• pp.69-77
• /
• 2004

In this study, sulfate reduction reaction was used to increase the decomposition of organics, which is the most critical factor for the stabilization of a landfill site. Composite of sewage sludge, papers, and incineration ashes was used in the column. The experimental results indicated that out of 10 reactors, the reactors 3, 4, 8. and 9 showed higher organics (i.e., TOC) removal rate than that in the absence of sulfate. The organics removal rates (K) in R3 and R9 were 8.65e$\^$-4/d and 3.82e$\^$-4//d, respectively. The times to reach 10％ of initial concentrations in R3 and R9 was 7.3 and 16.5 years, respectively, showing faster organics decomposition rates in these reactors.

• 한국세라믹학회지
• /
• 제44권11호
• /
• pp.618-621
• /
• 2007

In this study, flint glass batches with blast furnace slag (BFS) were prepared and the contribution of the BFS to the fining of melts was studied through investigations of the melting and fining characteristics. Additionally, a sulfur redox reaction for BFS-doped melts was examined by square wave voltammetry (SWV). The results of the melting & fining test showed that BFS improved the fining of the melts. In a voltammogram of BFS-doped melts, two reduction peaks were shown at high frequencies while only one peak appeared at low frequencies. The peaks were located at a potential that was similar to those of melts fined by sulfate. From those results it was concluded that sulfide ($S^{2-}$) in BFS has effects in glass melts that are identical to those of sulfate ($SO_4^{2-}$).

• 대한금속재료학회지
• /
• 제46권12호
• /
• pp.823-829
• /
• 2008

The solvent extraction process for the recovery of vanadium from leaching solution of SCR(selective catalytic reduction) spent catalyst was investigated by using Alamine336 as an extractant. The effects of experimental conditions, such as initial pH and concentration of sulfate ion, and ammonia concentration of stripping solution were studied. The extraction percentage of vanadium were increased with the increase of initial pH of leaching solution and decreased with the increase of sulfate ion. More than 99% of vanadium in leaching solution were extracted and stripped at the A/O ratio of 1.0 in 2 stages. On the basis of these results, an optimum solvent extraction process which vanadium was effectively recovered from SCR spent catalyst was proposed.