• Korean Journal of Materials Research
• /
• v.12 no.2
• /
• pp.146-152
• /
• 2002

Effect of polyaniline and additives on surface appearance of Zn electrodeposition was investigated by SEM and XRD analyzing. We carried out the experiment from sulfate Zinc bath containing sulfonated polyaniline, gelatin and thiourea by EG(Electrogalvanizing) simulator. Addition of polyaniline and gelatin in bath, crystal size and shape of hexagonal plane of Zn crystal reduced. Mixing of thiourea, however, brittle deposits were observed because of the difference between vertical growth and parallel growth. (1011) peak appeared with polyaniline and gelatin in XRD analysis. In case of mixing of polyaniline, gelatin and thiourea, (1011) peak appeared and intensity of Zn basal plane decreased. These results suggested that overpotential increased with addition of polyaniline and additives In bath.

• Journal of the Korean institute of surface engineering
• /
• v.15 no.4
• /
• pp.218-225
• /
• 1982

The effects of ferrous ion on the properties of bright nickel electrodeposit were exa-mined. Iron exists as ferrous ion (Fe+2) and ferric ion (Fe+3) in the bath, a portion of the former tend to be oxidized to the somewhat harmful ferric ion. Iron was added to bath as the ferrous sulfate, ferrous ion prevented from the oxidation with citric acid. It was found that the hardness was increased as the concentration of ferrous ion, the ductility was slightly increased too. The appearance can obtain the wide bright deposits within 4g/$\ell$. The corrosion resistance drastically dropped from 5g/$\ell$ In the case of considering the effect of ferrous ion on the corrosion resistance and the appearance, the allowable limits is 4g/$\ell$, if the reductant is used.

• ALGAE
• /
• v.20 no.1
• /
• pp.61-67
• /
• 2005

Agar was extracted from Gelidium amansii, which was harvested at the shores of Jeju Island in South Korea. As a unique solvent, the ability of dimethyl sulfoxide (DMSO) was used to separate agarose from agar by removing agaropectine and quality of the resultant agarose was characterized for chromatography purposes. Agar sample was agitated by motor-driven stirrer with DMSO in a water bath (at 70$^{\circ}C$ for 2 h) and centrifuged (3,000 rpm for 20 min). Resultant upper agarose layer was gelled, washed, dried and milled. The quality of agarose was evaluated by the analysis of proximate chemical composition, sulfate content, gelling strength and DNA migration. In this study, the separated agarose showed low sulfate amount (0.28%) and showed high gel strength (1190 g ${\cdot}\;cm^{-2}$). The resolution power and the ligase activities gave clear picture about the suitability of the present agarose for practical purposes.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.8
• /
• pp.1060-1068
• /
• 1998

The effects of various catalysts and softners on the anti-crease finish of ramie with glyoxal were investigated. A number of metal salts commonly used as Lewis acid catalysts in DP finishing of cotton with formaldehyde and N-methylol agents were screened for glyoxal treatment of ramie fabric. Various organic and inorganic acids were mixed with Lewis acid catalyst as co-catalysts to improve catalytic activity. As a result, the combination of aluminum sulfate and citric acid was proven highly effective in catalyzing the crosslinking of ramie cellulose by glyoxal under lower curing temperature. With a mixed catalyst, performance properties, such as whiteness and tearing strength as well as wrinkle recovery of treated ramie fabric were improved as compared with that treated with aluminum sulfate alone. Additional improvement of tearing strength and wrinkle recovery was achieved by applying silicons softner in the treatment bath.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1995.04a
• /
• pp.111-111
• /
• 1995

1. 혈압 및 맥박 실험 Acetylcholine과 상엽 수층분획을 단독으로 정맥에 투여한 경우 각각에서 농도 의존적으로 일시적인 혈압 강하 효과가 나타났고 빈맥 현상이 관찰되었다. Nitric Oxide 합성효소 억제제인 N$^{G}$ -Nitro-L-Arginine Methyl Ester(10 mg/kg I. v)를 전처리한 경우 위 두 약물에 의한 혈압강하효과는 공히 증가되어졌다. 또한 두 약물에 의한 혈압강하 효과는 Atropine Sulfate(1 mg/kg i.v) 전처리로 완전히 차단되었다. Cholinesterase 억제제인 Physostigmine (0.05 mg/kg i.v) 전처리는 상엽의 혈압강하 효과에 아무런 영향을 나타내지 못하였다. 2. 장관 실험 Acetylcholine과 상엽 수층분획을 organ bath에 첨가한 경우 각각에서 농도 의존적으로 장관 수축력을 증가시켰다. 혈압반응에서와 같이 장관실험에서도 두 약물에 의한 장관 수축력의 증가는 Atropine Sulfate(1$\times$$10^{-5}$ M)의 존재하에서는 완전히 차단되어졌다. 이상의 결과로부터 상엽 수층분획은 Acetylcholine과 유사한 작용을 지닌 물질을 함유하는 것으로 사료된다.

• Journal of the Korean institute of surface engineering
• /
• v.18 no.2
• /
• pp.53-60
• /
• 1985

The microstructure of zine electrodeposits was investigated by using zinc sulfate solution in still bath. The cathode current efficiency decreased with increasing current density, and decreasing temperature. The preferred orientation of the zinc electrodeposits changed from (10.3) texture to(10.${\ell}$)-(00.1)(${\ell}$=1, 2, 3) texture through (10.2)-(10.3) preferred orientation with increasing cathode over potential. The surface morphology of zinc electrodeposits changed from the dendritic growth with granular crystallites to the blocks of hexagonal crystallites packed together with increasing current density. The microstructure of cross section of the above deposits are the rough granular structure and columnar structure respectively.

• Journal of the Korean institute of surface engineering
• /
• v.5 no.1
• /
• pp.1-7
• /
• 1972

Copper -clad laminate(CCL) was fabricated and evaluated by bonding 35${\pm}$5${\mu}$ thick electroplated copper foils with a suitable adhesive to an insulating base such as phenolic resin laminate. In this study, electroplating methods and conditions were studied to produced good quality copper foils for printed circuit board applications. The electroplating bath solutions used were a copper-sulfate solution and a concentrated copper fluoborate solution. A surface roughening treatment that improved the adhesive strength of copper foils with an insulating laminate was also developed . A conventional copper sulfate solution containing sulfuric acid was used for the roughening treatment.

• Proceedings of the KIEE Conference
• /
• 1998.07g
• /
• pp.2539-2540
• /
• 1998

The characteristics of the electroplated nickel were investigated for the MEMS applications. Nickel sulfate bath was used and saccharine was added as the brightener. The effects of the brightener concentration were investigated by comparison of the surface morphology and the hardness of the electroplated nickel. The polarization characteristics were also investigated. The best results were obtained at 1g/$\ell$ saccharin addition.

• Journal of the Korean institute of surface engineering
• /
• v.42 no.5
• /
• pp.191-196
• /
• 2009

Nanocrystalline Cu thin films were electrodeposited from sulfate baths and investigated systematically the influences of $Cu^{2+}$ concentration and additives on current efficiency, residual stress, surface morphology, and XRD patterns of electrodeposited Cu film. Current efficiency was nearly 100% at from 0.2M to 1.0 M $Cu^{2+}$ concentration. but it was linearly increased with $Cu^{2+}$ concentration at less than 0.2M. The residual stress was observed in range of 7.9 to 18.4 MPa and tensile stress mode. Dendritic and powdered form was obtained at below 0.1 M. As increased with $Cu^{2+}$ concentration in solution, the main peak in the XRD pattern shifted (111) and (220) from (200). In the other hand, all about 100% current efficiency observed in all additive concentration systems, and residual stress observed in range of 20.4 to 26.3 MPa tensile stress. The condition 5(Ultra make-up - 10 ml/l, Ulta A - 0.5ml/l, Ultr B - 0.5 ml/l) was good surface morphology, and fcc(111) peak in XRD patterns increased with increasing additive concentration.

• Journal of the Korean institute of surface engineering
• /
• v.37 no.2
• /
• pp.80-85
• /
• 2004

Chromium-carbon (Cr-C) and chromium-carbon-phosphorus (Cr-C-P) alloy deposits using trivalent chromium sulfate baths containing potassium formate were prepared to study their current efficiency, hardness change and phase transformations behavior with heat treatment, respectively. The current efficiencies of Cr-C and Cr-C-P alloy deposits increase with increasing current density in the range of 15-35 A/dm$^2$. Carbon content of Cr-C and phosphorous of Cr-C-P layers decreases with increasing current density, whereas, the carbon content of Cr-C-P layer is almost constant with the current density. Cr-C deposit shows crystallization at $400^{\circ}C$ and has (Cr+Cr$_{ 23}$$C_{6}$) phases at $800^{\circ}C$. Cr-C-P deposit shows crystallization at $600^{\circ}C$ and has (Cr+Cr$_{23}$ $C_{6}$$+Cr_3$P) phases at $800^{\circ}C$. The hardness of Cr-C and Cr-C-P deposits after heating treatment for one hour increase up to Hv 1640 and Hv 1540 and decrease about Hv 820 and Hv 1270 with increasing annealing temperature in the range of $400～^{\circ}C$, respectively. The hardness change with annealing is due to the order of occurring of chromium crystallization, precipitation hardening effect, softening and grain growth with temperature. Less decrease of hardness of Cr-C-P deposit after annealing above $700^{\circ}C$ is related to continuous precipitation of $Cr_{23}$ $C_{6}$ and $Cr_3$P phases which retard grain growth at the temperature.